Printing advice please

What is the best printer to use with Aperture?
I am not satified with the color of the pictures I print using my HP 310 series printer. The saturation, hue etc is not nearly as good as it is on the computer screen. I have sufficient ink, good quality paper etc.
I think the printer is deciding on the colors, not aperture, and I am not sure how to correct this problem.
I appreciate any advice you can give.
Thanks in advance

Getting the print to look like the image on the display is very labor intensive. For an idea of what is needed see Calibrating Your Aperture System in the Aperture manual.
To answer you specific question concerning color management between Aperture and the printer you will need to look in two places.
First when you print in Aperture you will see this dialog:
(if you don;t see it click the More Options button at the bottom of the print dialog)
You will want to make sure Printer Managed is not selected. Now for most printer drivers that is sufficient to turn off color management in the printer but you will want to check.
Once you select Print in Aperture the printer dialog will open.
Select Color Matching
Then make sure then radio buttons are grayed out.
Again this is the way a majority of printers work. Your printer may be be different in which case you will need to consult the manufacturers information concerning turning off color management.
regards

Similar Messages

Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

Question ?
Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
Print head test sheets/head cleaning etc ok .
Have tried to to uninstall and reinstall but nothing.
Any advice, please?.
ps
The printer deos not show up on Epsons site but i think I have the software from Apple.
Not an ideal situation.

Try a reset > OS X Mountain Lion: Reset the printing system

New System Build feedback/advice, please...

Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
Purchase date: this week
Budget: I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more research, my inclinations are trending higher.
System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
Parts to Upgrade: Full system build
O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
Vendor: Newegg unless I can save big $$ else where. I like B&H.
It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
Any advice is appreciated. Thank you for your expertise.
Processor:
Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
$299 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
or
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
$569 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
Mobo:
MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
$218 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
or
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
$240 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
or
MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
$380
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
Memory:
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
$130
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
Hard Drive:
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
$160
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
Video:
GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
$160 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
or
MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Item#: N82E16814127696
$300
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
Optical Drive:
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
$70
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case:
COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
$60
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
Power Supply:
FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
$90
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
Total $1190
or $1760
I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.

Alex,
I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
- robust, runs and never fails
- has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
- quiet; who wants to be doing creative work with any server room like wind noise
Now let me be specific where you are simply WRONG WRONG WRONG:
You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
You stated: "Full towers - in themselves - are worse for cooling"
Fact: That is one crazy indefensible statement!
I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
Regards,
Jim

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

AI crashes when I try to open a file or make a new one. Any advice please?

I'm using a laptop and windows. AI starts up ok but I can't actually create anything before it shuts itself down. Any advice please?

Hi Tm,
Can you please check if there are any printers installed/connected on your system ? If yes can you please un-install/disconnect them and verify again ?
Thanks & Regards,
Raghuveer

Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
Both of these can be used with Mail on any device.

Officejet Pro 8625 Printer Error Please turn printer off, then on

Upon power up and connection to wiFi all appeares to be functioning properly. Can even e-print. All is still well when printer goes to sleep (will wake-up and e-print). After about 10-15 minutes will get a white screen with an message "Printer error Please turn printer off, then on" all other lights are flashing including power button. I have tried updating windows and print drivers. This first happened about two weeks ago. After updating print drivers all appeared to be well until three or four days ago then it has all started again. HELP PLEASE

Dear ChristineChandl,
Please follow the steps of this document:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8500-All-in-One-Printer-series---A909/3752454/m...
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

TS3391 I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Load balancing across 4 web servers in same datacentre - advice please

Hi All
Im looking for some advice please
The apps team have asked me about load balancing across some servers but im not that well up on it for applications
Basically we have 4 apache web servers with about 2000 clients connecting to them, they would like to load balance connections to all these servers, they all need the same DNS name etc.
what load balancing methods would I need for this, I believe they run on Linux
Would I need some sort of device, or can the servers run some software that can do this, how would it work? and how would load balancing be achieved here?
cheers

Carl,
What you have mentioned sounds very straightforward then everything should go well.
The ACE is a load balancer which takes a load balancing decisions based on different matching methods like matching virtual address, url, source address, etc then once the load balance decision has been taken then the ACE will load balance the traffic based on the load balance method which you have configured (if you do not configure anything then it will use the default which is "round robin"), then it will send the traffic to the servers which it has available and finally the client should get the content.
If you want to get some details about the load balancing methods here you have them:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/overview.html#wp1000976
For ACE deployments the most common designs are the following.
Bridge Mode
One Arm Mode
Routed Mode
Here you have a link for Bridge Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Bridged_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for One Arm Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for Routed Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Then as you could see in all those links you may end up having a configuration like this:
interface vlan 40
description "Default gateway of real servers"
ip address 192.168.1.1 255.255.255.0
service-policy input remote-access
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.1.1
class-map match-all slb-vip
2 match virtual-address 172.16.1.100 any
policy-map multi-match client-vips
class slb-vip
    loadbalance vip inservice
    loadbalance policy slb
policy-map type loadbalance http first-match slb
class class-default
    serverfarm web
serverfarm host web
rserver lnx1
    inservice
rserver lnx2
    inservice
rserver lnx3
    inservice
rserver host lnx1
ip address 192.168.1.11
inservice
rserver host lnx2
ip address 192.168.1.12
inservice
rserver host lnx3
ip address 192.168.1.13
inservice
Please mark it if it answered you question then other users can use it as reference in the future.
Hope this helps!
Jorge

My Z2 tablet has yellow lines appearing on screen edges. Advice please?

My tablet developed a yellow line down the left hand side of the screen fairly early on. This was shortly followed by another line along the bottom, and now one on the right. Advice please?

Definitely a hardware fault, you should have no problem getting the tablet replaced, or repaired otherwise.

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3

Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe

I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?

I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?

Try the suggestion by Plusco here > https://discussions.apple.com/thread/3404394?start=0&tstart=0

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
Answer: Yes
Then "Verifying" appears at top of screen but nothing happens.
Tiscali/Talk Talk is the provider.

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al

I have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? than

i have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? thanks

It is not compatible with Windows 7. Advice could include telling you to purchase the latest version. The other option would be to buy an old computer that is capable of running it.

Printing advice please

Similar Messages

Maybe you are looking for