Printing alv with logo
hai
I have created the ALV report with the company logo in it , while taking the printout the log will not apper in the print.I am using the grid alv. Could u please tell me how to apper log in the print out.
bye
You will have to do this using the print events :
PRINT_TOP_OF_PAGE
PRINT_TOP_OF_LIST
PRINT_END_OF_PAGE
PRINT_END_OF_LIST
Similar Messages
-
Hi Experts,
Im creating a ALV Report with icons and so far so good but it's printing the icons...
It's it possible to print a ALV with the icons or it only prints the code of the icon?
Thanks in Advance
Best Regards,
João MartinsIt is not possible in SAP, but you can do a screenshot (PrintScreen button) and the print the screenshot.
-
How to print ALV with full page width used?
Dear all,
I have a report which print out with a small font if some of the fields have a long data content, while there a large white space on the right hand side.
After a few test, I think the following cause the problem:
1) The line column is less then the page column
2) The setup leave write space unused in the right side
(Tested by setup a format which have the same column count as the testing print out data)
Would like to know are there any work around on this.
Regards
Bill
Edited by: Bill Chie on Jun 13, 2011 7:23 PMHi Wiz,
Thanks for the information.
But it look like that it only affect the column width but not the migrate, anyone have any idea about the migrate setting?
And I would like to know if I can:
- Setup a limit for the long text limit
- It the text over the limit, go to 2nd line
Regards
Bill -
User getting print output with logo and footer is cut
Hi Experts,
User is trying to print a PDF from Portal system and the print output comes with the logo cut at the top on the right handside and footer cut at the bottom
Please can you let me know what could be the issue and how to investigate the issue
Regards,
RaviChandra.KatlaHi Nick,
The user has reverted back that the print is working fine when you print word documents or other systems
The user is trying to give print from the Portal system and says that
"it is not possible in e-Recruiting to choose a printer like it can be done in a SAP backend system. E-Recruiting is a web based application and with any correspondence scenarios which allows print outs there is only a button "print". Clicking on that button the e-Recruiting system is triggered to print the requested document on the network printer of the users. This process happens blind in the background and there is absolutely no user interaction (like choosing layout options, choosing printer, changing properties etc.) necessary or possible"
Also for your information print privew is getting dispalyed correctly
Please can you help us as the logo and footer is still cut, also please can you let me know if you require more information
Thanks and regards,
Ravi
Edited by: ravi prasad on Oct 13, 2009 3:10 PM -
How can print alv with out color ?
i am printing an alv report that i define certain colors for
The columns.
But when i print the report i see lines (like XXX or /////) on the
Colors ( may be to see the difference of the colors ) .
is there any way to ignore the colors in printing ?
i checked IS_PRINT I didnt see any parameter to ignore
Colors in printing.Hi dakota,
if you print locally via SAPGUI, please play around with color options (use color!) of SAPLPD. If it happend with a SAP network printer, is has not been properly installed.
Regards,
Clemens -
Hi all,
I have a requirement to print an ALV grid display exactly in the same format as we see in output. That is, if the cells are merged in ALV then in Print also they should come as merged.
But when I am printing the ALV output it does not give merged cells. I am using OO ALV.
Is my requirement feasible. If yes, Please help me to proceed?
Thanks,
DayaHi Daya,
In the ALV grid control print or print preview, cells that have identical content are not merged. This is necessary in order to be able to distinguish between blank cells and cells that only become blank after merging. The standard behaviour for the different ALV lists is described in Note 447055.
Regards,
Md Ziauddin -
ALV Report with Logo .. Print Out Problem
Hello Guys..
I am facing and differerent problem , I have created one Report in ALV contain logo of my company and some other details as per selection screen.
At the time of taking printoput the logo is not coming in print out only report data is coming.
How I take logo and ALV report in one print out .
Please do the needful.
Regards
Swati....We Can't take logo of ALV in print out.
-
Need to print the company logo in alv report
Hi All ,
I am displaying an alv grid for some QM report .
I have used top-of-page event and 'REUSE_ALV_COMMENTARY_WRITE ' FM to display the logo and header . Every thing is working fine .
But when I am taking the print-out the logo is not getting printed . Except logo everything is coming in the print out.
So please help me if you have any idea ragarding how to print the logo in the report.
regards
Satishprint the logo is really simple, check this little sample:
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'Z_LOGO'
it_list_commentary = gt_list_top_of_page.
and how to upload the logo in this link:
uploading logo
regards
Edited by: Sebastian Bustamante on Sep 24, 2008 3:26 PM -
Problem with printing ALV lists
Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format? -
Printing ALV list with ADS (pdf printer) in non-english charset
Hello!
I have an issue about printing alv list with pdf printer in non-english charset. We have two printers. One for alv lists (SWINCF: Casc.Fonts SAPWIN Unicode) and one for pdf forms(adobe document service). I want to use one printer for any documents. But PDF printer prints non-english charset like ########.
What can I do ?Hi, Roman!
I want to use PDF printer for both types of output. I have a dedicated java instance for ADS.
There is a device type for our Kyocera Printer. My pdf printer prints ALV list good exept russian charset.
It prints like ##### -
ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work. How can i get this software in a downloadable format? is it actually free - I'm assuming it is... Hope someone knows the answer to these questions...
The download itself is free and is valid for 30 days only. After that, the software ceases to work.
CS4 is pretty old, no longer sold and no longer supported by Adobe. It's also not compatible with many modern OSes.
Why do you have to work with such an obsolete version of Photoshop?
What kind of "designer" uses it? -
Can I get a sample program of ALV (oops) with check boxes in it. thank you.
Types: begin of lt_io.
include structure mara. " Your Structure
Types: style_table type lvc_t_style.
Types: end of lt_io.
data: lt_io type table of lt_io,
ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
lo_grid type ref to cl_gui_alv_grid.
field-symbols: <io> type lt_io,
<fcat> type lvc_s_fcat.
... fill your output table ....
ls_layout-stylefname = 'STYLE_TABLE'.
loop at lt_io assigning <io>.
PERFORM set_style USING 'CHECKBOX' "Your Filename
CHANGING <io>.
endloop.
... Fill Your Field Catalog lt_fcat
read table lt_fcat assigning <fcat>
where fieldname = 'CHECKBOX'.
<fcat>-checkbox = 'X'.
create grid control lo_grid.
CALL METHOD lo_grid->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_fieldcatalog = lt_fcat
it_outtab = lt_io[].
FORM set_button_to_line
USING iv_fieldname TYPE lvc_fname
CHANGING cs_io TYPE io.
DATA: ls_style TYPE lvc_s_styl,
lt_style TYPE lvc_t_styl.
ls_style-fieldname = iv_fieldname.
if cs_io-checkbox = ' '.
ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
else.
ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_style-maxlen = 2.
INSERT ls_style INTO TABLE io-style_table.
ENDFORM. "set_icon_to_status_line
[/code].
A classical report is a program that generates a single list, which must contain all of the required detail information.
1) This procedure may result in extensive lists from which the user has to pick the relevant data.
2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
3) The desired selections must be made beforehand and the list must provide detailed information.
4) For dialog sessions, there are no such restrictions.
5) The user is present during the execution of the program and can control and manipulate the program flow directly.
6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
Advantages.
Collapse multiple reports into one, drastically cutting down your report development time
Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
Add conditional structures into your ALV report: No programming required!
Combine ALV with display variants to meet a wide range of reporting requirements more easily
Dynamically reorder column layouts and add/subtract fields
Enable users and analysts to save their own personalized variants
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
declarations for spl.group.
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'FIELD1'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
APPEND LS_SORT TO E06_LT_SORT.
LS_SORT-FIELDNAME = 'FIELD2'.
LS_SORT-SPOS = 2.
LS_SORT-UP = 'X'.
ls_sort-subtot = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
for creating the group..
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
and pass this info to FM...
layout-sUBTOTALS_TEXT = 'SUbt...'
and pass spl group info to fieldcatalog also...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_SPECIAL_GROUPS = GT_SP_GROUP[]
IT_SORT = GT_SORT[]
TYPES :
BEGIN OF ty_vbak,
vkorg TYPE vbak-vkorg, " Sales organization
kunnr TYPE vbak-kunnr, " Sold-to party
vbeln TYPE vbak-vbeln, " Sales document
netwr TYPE vbak-netwr, " Net Value of the Sales Order
waerk TYPE vbak-waerk, " Document currency
END OF ty_vbak.
DATA:
vbak TYPE vbak,
gt_vbak TYPE TABLE OF ty_vbak.
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
Form f_read_data
FORM f_read_data.
SELECT vkorg kunnr vbeln netwr waerk
UP TO p_max ROWS
INTO TABLE gt_vbak
FROM vbak
WHERE kunnr IN s_kunnr
AND vbeln IN s_vbeln
AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
Form f_display_data
FORM f_display_data.
TYPE-POOLS: slis. " ALV Global types
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-do_sum = &2.
ls_fieldcat-cfieldname = &3.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
add 1 to ls_sort-spos.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
ls_sort-subtot = &2.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
TABLES
t_outtab = gt_vbak.
ENDFORM.
Check out these sample programs
BCALV_GRID_01
This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
corresponding handler methods control the appearance of the list printed.
BCALV_GRID_02
Show a detail list in an amodal window. There is no second dynro needed in contrast to
BCALV_GRID_03.
BCALV_GRID_03
This program implements a function on event DOUBLE_CLICK. According to the selected line data
from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
BCALV_GRID_04
Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
lights are set to 1 (red), 2 (yellow) or 3 (green).
BCALV_GRID_05
Demonstrate the creation of an own toolbar button.
BCALV_GRID_06
Demonstrate the creation of an own context menu.
BCALV_GRID_07
Append a menu button to the standard toolbar.
BCALV_GRID_08
Append a menu with default button to the standard toolbar. It is exactly the same as
BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
Editable ALV grids
BCALV_EDIT_01
This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02
This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03
In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04
This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05
This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06
This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07
This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08
This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Check this link tooo
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
check these links
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Try these links
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
check this sample code for intercative alv report
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH -
How to trigger New page while using ALV with classes/oops?
Hi All
I am trying to print a report which has to show the data in two pages.
I am using ALV with classes/oops.
Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
Please send some code samples also if available.
Thanks in advance.
Jerryusing sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
in case of list you can view that directly.
sort-fieldname = 'FIELDNAME'.
sort-group = '*' "triggers new page
sort-up = 'X'.
append sort to it_sort. -
Runtime error in Downloading and printing ALV
Hi Gurus,
I have created a ALV with subtotal text and hotspot click event using OO ABAP.
When ever I am trying to download the ALV to Excel it's generating a runtime error, same is happening when
I am pressing the Print button in the ALV.
Please Help !!!!Hi avik2005uitbu,
in debugger, before or just when ALV display is called, check the internal tables for field catalog and the date to be displayed. From debugger, you can save the internal tables contents as local files (rigth-click mouse, save as local file or CTRL->F11 in classical debugger, Save as local file with rogth-click on internal table name in variables or table display, no shortcut ). After saving both as excel, have a look at the fieldnames in the internal table and in the field catalog. Additionally, you should check all other parameters as layout and sort for fieldnames not present in field catalog and display table.
After having done these steps, you will definitely know what is wrong.
Also, when in GRID display, point the mouse outside (right of or below) the table display area, SHIFT-DOUBLE-RIGTH-CLICK invokes the ALV consistency check.
Please just do it.
Regards,
Clemens -
Hi experts,
T code ME2m after executing i would like to print that sheet . with all coloms in A4 size paper.
how can Increse size of LETTERS and colom and rows.
after pressing PRINT icon we will get pop up window(Print ALV List.
then Output device - Local
number of copies1
Print from page 1 1
Then i clicked PROPERTIES
then i double clicked PARAMETER VALUE X_65_255
then i selected Format radio button then i selected X_58_170..
then i executed..
that tiem system giving message like
System cannot print the last 176 columns of the
report
but i am not getting all the fealds in the page ?
how to do configuration for this.
Regards,
Anthyodaya.In ME2N menu List --> Export document to word processing -> Create word document-> Start MS word.
After downloading,Click F11,Save it as word document,Adjust page set up to Land Scape and also custom paper format
to accommodate all fields in print.
Maybe you are looking for
-
Sophisticated Lady by Billie Holiday can no longer be made into a ringtone
Despite the fact the I already own several versions of this song on CD, I suckered myself into buying it from iTunes just so that I could make it into a ringtone for my iPhone. Once it finished downloading iTunes cheerfully tells me: "Sophisticated L
-
Hi All After new installation of WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE UCM_server1 can’t start. (Please see trace below). WCC 11.1.1.7 run without issues on this environment. Steps: 1. Installation of jrockit-jdk1.6.0_45-R28.2.7-4.1.
-
SharePoint 2010 Word, Excel Office Docs keep prompting for Username and Password
Users access SharePoint externally. They have the URL in their IE Intranet zone. They can login and browse OK but when they click a Word, Excel or Office document they get prompted for Windows Username and Password. This works but is never saved, so
-
my disk drive will start up when i plug it in, and runs for about 30 seconds, but wont get recognized in my computer. It used to show up in the finder but that doesnt happen anymore
-
Icloud movie purchase download problem
Trying to download and watch an itunes movie I previously purchased on my iphone but it isn't showing in my itunes. It is only showing as an icloud option on my iphone but I don't have the space anymore to download and watch it there. How can I watch