Printing an 11 X 14 image from Lightroom 5 on an Epson 1400

I recently switched to a Mac and upgraded to Lightroom 5. I cannot get an 11 x 14 print from this setup when I was able to int he past. The image doesn't print full size. It prints smaller and to one side of the paper. Can anyone help?

I had the same problen with Lightroom 5 - Prepares the files but won't Upload to Blurb. Tried numerours times. It is a Landscape size Book 132 Pages. There is a BUG in Lightroom and here is how I got it to work:
Check each slide and make sure APPLY BACKGROUND GLOBALLY, GRAPHIC or BACKGROUND COLOR and not checked,. If so Uncheck them.
Go to EDIT and SELECT ALL Slides in the Book.
Select Apply Background Globally - turn it off and on several times, then leave it off
Select GRAPHIC - turn it off and then turn it on and off several times
Select BACKGROUND COLOR - turn it on then off then on then off
I ended up with APPLY GLOBALLY unchecked for Every Page.
GRAPHIC was turned on with a Graphic set at 12% Opacity on every Page
Again check each page first for these Checkmarks or just fix exverything with SELECT ALL.
Background Color was Turned off.
NOW UPLOAD THE BOOK - It took a couple hours but it uploaded without a hitch., I turned off all Firewalls and Plugged directly into the Router. I am using an IMac 27" with 32 GB of memory and this is the only way it would work. The Mac is about 7 days old and Lightroom 5 is also 7 days old. BUGGIEST piece of software I have ever used.
Note - one of the above steps fixes the BUG - I am not sure which one but one will fix your book. It finally uploaded to BLURB today. It took a few hours though.

Similar Messages

Opening image from lightroom

When I open an image from lightroom as an edit copy it's profile is a psd file. PROPHOTO RGB. Should I convert to adobe RGB or use the PROPHOTO RGB profile? After edit in ps2 should it be saved as adobe rgb to be imported back to lightroom? Thanks, Owen

It depends on the use to which you intend to put the PSD file. If you're preparing for print, and that process can support PRo Photo space, I'd use that. Otherwise aRGB.

Uploading images from Lightroom 3 to CS5

Is there an easy way to upload about 100 images from lightroom 3 into Photoshop CS5 at one time? I'm trying to add my logo on all my images without pulling each one in at a time.

The graphical identity you can select in Export, needs to be applied the same to all of the images that you export using that setup - it seems you have general but not per-image control, over where it is anchored, how inset from the edges, how sized and how rotated. So that's good if you can find some compromise which works OK for all - or nearly all - of the images.
I guess if there are some images for which this watermark placement turns out not to work well, you can export just those ones again afterwards, overwriting, with different settings. Each can be named and saved, as an export preset, for repeatability.
But I can't find any way to easily individualise per image, while at the same time,. exporting (or printing as JPG) a whole lot of images in one batch.
The "droplet" method I described, works through your set image-by-image inside Photoshop, as a pre-recorded sequence of steps (a PS Action). If a pause-for-input can be included in this Action such that the user can step in and manually place the watermark image interactively, and then resume - then the output could be individualised. The downside is that there would be no persistence of this; except in the output copy. So it would all need to be reinvented afresh, each later time this export happened.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

Photoshop CS-6 does not open images from Lightroom 5

I do have Photoshop CS-6 and Lightroom 5. Nearly all images were created in a Windows 7 (64 bit) environment. I have moved platforms to MAC. I have moved all images and the Catalog. I have changed platform to MAC. I am now using MAC OS-X (10.9.1).
I am able to see all images in Lightroom, I am able to modify all images in Lightroom. I can export the images to Jpeg (for example) from Lightroom. I do have a warining at several images in Lightroom = "metadates have been changed - would you like to overwrite data or import ?"
First time I have tried to open an Image from Lightroom (hand over) Photoshop opens, but does not show any picture and no error message. But when I then look to recently opened files, the image is in the list. When I do click on this, Photoshop shows and error message: "the datamodule can not handle the file format" (which is either RAW or jpeg).
Another expirience is, when I try to open directly from Photoshop any other image, Photoshop ignores the XMP and opens the original file without any modification.

derMueller wrote:
Another expirience is, when I try to open directly from Photoshop any other image, Photoshop ignores the XMP and opens the original file without any modification.
That's normal if the raw files were originally edited in Lightroom. Lightroom stores all edits in the catalog, not the xmp sidecar. You can set Lightroom to write to xmp as well, but that slows it down a little and so it's off by default. The Lightroom shortcut ctrl/cmd+S will also save to xmp.
I do have a warining at several images in Lightroom = "metadates have been changed - would you like to overwrite data or import ?"
That's related to the above, and also normal if you go the other way - edit in ACR and then move to Lightroom. It'll then be in xmp, but not the Lightroom catalog.
As for the missing on-screen image, that's a common video driver bug (although I suppose other causes are possible). For Windows you can download updated drivers directly from the manufacturer's website, but that's not possible with Mac. You'll have to wait for Apple to fix it.

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!

It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish to edit in these everything works fine.

Same here. I've never had trouble with this function before.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like t

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me. What fix do you recommend?

Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul

Photoshop cc 2014 will not open images from Lightroom

I have just upgraded Photoshop and Lightroom through the creative cloud,and now when i take an image from Lightroom to Photoshop,Photoshop opens but the image does not appear.I have Photoshop cc 2014 as the default editor.I am able to open the image in any of the plug ins i have installed e.g Topaz Labs.

This has been reported quite a lot lately. SSprengel, have you actually seen an uninstall and reinstall correct the link between Lightroom and Photoshop CC (2014)? If so, I'll start advising people to do so. I hadn't run across anyone claiming to have discovered a solution to the problem yet.
-Noel

Sending images from lightroom 5 to elements 12 for panorama.

Hello. I have elements 12 and lightroom 5 installed. I go to send 5 images from lightroom to send to elements to do the pano. When I select the 5 images I want I click go to edit and then select merge in panorama. It then opens up elements 12 but after waiting for some time the images font show up. It used to work but now it don't. In lightroom 5 I have it set in the presences right so my external editor is elements 12. After a while I looked in my pictures section in windows and lo and behold all my images that I have sent to elements to do psn os with are in pictures section as raw files. So lightroom is sending them but not to my external editor.
Can someone please help me this is very frustrating.
thanks for any help you can offer me.

Which version of Lightroom 5 do you have?
Which version of camera raw are you using in photoshop elements 12?
In Lightroom what are the preferences at the top of the External Editing tab set to?
I realize that yours may be different, because you don't have photoshop installed, but here even though photoshop cc 2014 is on this machine, as long as i have pse 12 and not cc 2014 open before
choosing Photo>Edit in>Merge to Panorama in Photoshop, it does work for pse 12 with nikon nef files (camera raw files), but it uses the preferences at the top of the external editing tab instead of the ones below.
So if the Bit Depth is not set to to 8 bits/channel then photomerge doesn't work.

Exported images from lightroom 3.6 to my desctop are much inferior to the image on Lightroom

Hi All,
Exported images from lightroom 3.6 to my desctop are much inferior to the image on Lightroom in color, sharpness, detailes ext. Anyone knows why and how to fix this? I tried all the export combanations I could and the problem remains.

How come I can't export a image from lightroom 3 that is 600w x 610h?

How come I can't export a image from lightroom 3 that is 600w x 610h?

I think thats what I'm doing. No luck though. Maybe its a bug?

How can transfer images from lightroom to LaCie external drive?

How can i export images from lightroom toLaCie external drive?

Hi welcome!
It's possible that your description of what you want to do is a bit ambiguous.
Are you wanting to move your images from an internal drive to an external drive?
Are you wanitng to actually export images out of Lightroom with the destination being an external drive (a very different propostion to the above option)?
Is there something else that you are actually wanting to do?
Also Lightroom does not hold the images themselves.
Lightroom has a database (called a catalog) that references the location of images that have been imported.
Tony Jay

If export an image from Lightroom 5 to Photoshop and make changes

after export an image from Lightroom 5 to Photoshop and make changes to this image and then save in Photoshop as a tiff it does not show up in the original folder in Lightroom after exiting Photoshop

Does this help?
Re: Photos from Lightroom 5 to Photoshop CC (2014) and back...

Printing an 11 X 14 image from Lightroom 5 on an Epson 1400

Similar Messages

Maybe you are looking for