Printing an ABAP report does not work

I am starting to learn ABAP programming, i have a simple report:
REPORT Z_ABAP.
NEW-PAGE PRINT ON IMMEDIATELY `X'.
WRITE: /'Test printing'.
FORMAT COLOR OFF INTENSIFIED OFF.
WRITE: /.
WRITE: 'Hello World' NO-GAP.
WRITE: /.
I defined an output device with properties "YSWIN (Rel.4.x/SAPlpd 4.09 + ONLY!)" and "G: Frontend Printing with Control Tech", the printer name is __default.
I print the above report via "Program" > "Print", nothing is printed, i check my local printer, no print job there.

Hello,
Can you share with us the solution of this issue.
Also please help to close this thread as it was solved.
Thanks.
Regards,
David

Similar Messages

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Print icon on toolbar does not work

Recently bought new computer running W7
Use acrobat to print postage labels on royal mail site
Have latest version of acrobat and when screen comes up showing label to be printed the 'floating' toobar appears but clicking on print icon has no effect
I am forced to used 'CTRL P' and then 'enter'
Occasionaly CTRL P gives me another toolbar at the top of the window which also has a print icon, this does nothing either
Can anyone suggest what is going wrong, should I go back to an earlier acrobat that worked fine on my old XP PC ?
Thanks
Graham

Thank you
Yes you are correct using a PDF in browser to print post labels.
Running Windows 7, Internet explorer 9, Acrobat Reader Version 10.0
CTRL P brings up dialog box OK and I can print from there.
Cannot comment if problem happens outside of browser as it is home
computer and do not have need to view PDF's offline but will find thsi
out if important.
Graham
>--Original Message--
>From: [email protected]
>Date: 23/02/2012 13:18
>To: "flat-pack"<[email protected]>
>Subj: Print icon on toolbar does not work
>HitenderPrakash [http://forums.adobe.com/people/HitenderPrakash
created the discussion
>"Re: Print icon on toolbar does not work"
>To view the discussion, visit: http://forums.adobe.com/message/4224450#4224450

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

SAPWebConsole - dropdown field works in ABAP but does not work on Web

Hi All,
I am writing an RF transaction in ABAP using regular dialog programming. My transaction works fine in the GUI. But it does not work OK when I access the transaction over the web (using IE) via SAPWebConsole.
My issue is that on the SAPGUI I have a dropdown box that is populated with entries and I can choose an entry but on the same transaction on IE I cannot choose any entries in the same field as it does not have a dropdown option.
Am I doing something wrong here in the ABAP? Am I assuming incorrectly that SAPWebConsole can have dropdown lists?
Thanks,
N.
I know that this is stictlynotan ABAP issue but it does have possible overlap.

Hi Niall!
WebSAPConsole has in it's own limitations with regards to Dialog Programming Development, but a much better version than SAPConsole(Text Based).You cannot have drop down on WebSAPConsole on RF Transaction,pl suppress it in you dialog programming, both F1 & F4.Pl look at the Supported Features in the WebSAPConsole USers Guide.
Let me know if you have any additional questions regarding this?
Thanks
Gisk
Message was edited by: Sivakumar Ganesan(Gisk)

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Printing the document grid does not work

Hi,
I got here a lot of master documents. The design is built with a squre document grid. I need to print or export it as PDF. But activating the checkbox does not work. Is it possible to print it? Ruler guides and the base grid are working. But I need to print the document grid.
Is there any possiblility to to this?
Thanks
DerSiedler

Printing the document grid is not an option, but you might be able to work around it by creating your own grid using Layout > Create Guides... then printing the visible guides.
I'd do that on a separate layer. If you want the grid, but not other guide, make a real grid with colored strokes using step and repeat, again on a separate layer.

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Print report does not work in built mode (LV7.1+XP)

Good morning,
I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
I really hope that NI has a solution
for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
Thanks in advance!
Martin

Skinny wrote:
> In normal edit mode I can use the Print Report.vi (using the default
> win printer) to print out some data. The generated report is a
> standard NI report (that is NOT HTML).
>
> When building an application this no longer works. No data is passed
> to windows (the printer icon in the system tray never appears) - and
> hence no output on the printer!
>
> I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
> but I've also tried using the old stable Canon LBP 8 II on the FILE:
> port - but in .exe mode the file box does not appear.
>
> I really hope that NI has a solution for the problem since we need the
> built application on several client. And we do not want to pay for
> several LV licenses.
Are you sure you checked the "NI R
eport Support" under the Advanced
button of the Installer tab in the application builder?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

M2727nf_duplex printing using Tray-2 does not work

My laserjet M2727nf has been working fine for the last 5 years. However, after I upgraded to Yosemite (Mac OSX 10.10) recently, duplex printing gives me strange problems.
a. Duplex printing from Tray 1 works fine, however,
b. With tray 2, when I choose duplex printing option, first it prints the page#2, and then it prints the page#1 on a different paper. Also while printing the page#1 on a 2nd paper, it mimicks (rotates the paper) as if it's prinitng page # 2 again. But effectively, it does not print both pages on one paper, but it prints two pages on 2 papers.
I tried several solutions usch as installing the new HP mac driver 3.0 again, and removing all the presets again creating the new ones. However, none of these measures have not solved my problem.
Any help in this regard is sincerely appreciated.
best
ravi

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HTMLDB_ITEM.date_popup on single row report does not work

Dear HTML DB Team,
On a report wit a single( one ) row the "HTMLDB_ITEM.date_popup" does not fill the selected date to the cell. (Same for wwv_flow_item.date_popup)
On the same report with 2 or more rows HTMLDB_ITEM.date_popup works fine.
Any suggestions?
Erik
testcase:
create region:
select htmldb_item.hidden(1,empno) empno,
ename,
htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
wwv_flow_item.date_popup(6,null,hiredate) hiredate,
htmldb_item.text(7,sal,10) sal,
htmldb_item.text(8,comm,10) comm,
htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
from emp
delete 13 rows from emp ( 1 row left ):
delete from emp
where ename <> 'KING';
=> date_pop does not work

Using the htmldb_item API vs. built-in multi-row update functionality:
I can't speak to the question about the date for the next HTML DB release. But I'd like to add a few comments to this discussion regarding the use of the htmldb_item API package. It is generally advisable to use the built-in multi-row update functionality instead of htmldb_item function calls when implementing tabular forms. While I do acknowledge that some display types such as date popups are not yet available, I would nevertheless recommend working with what's available on the report column attributes page (i.e. using a text field for the date columns) as opposed to using htmldb_item functions whenever possible. Please keep in mind though that they are mutually exclusive, so they can't be combined on the same report.
The reasons for my recommendation are simple: first of all, if you use htmldb_item calls as part of your SQL statement, the HTML form elements are rendered for all rows in your result set. The built-in types on the other hand only render HTML form elements for those rows shown on your current page, thus you get better performance. Secondly, htmldb_item calls make your SQL statement quite complicated, not only has the engine to jump back and forth between executing your SQL and calling the PL/SQL functions, you also need to take extra care implementing your PL/SQL processes according to the item IDs you assigned in your htmldb_item function calls. When working with e.g. popup LOVs, this gets even more complicated because that type actually results into two html form elements for each column (one storing the hidden ID, one storing the display value). And lastly, by using the multi-row update functionality, you would get lost update detection automatically built. That means, that you can't accidentally overwrite another person's changes in the event that you should both be working on the same data. Implementing this kind of functionality with your htmldb_item based tabular forms would take a lot more effort than simply go with what's already provided.
So please carefully weigh the benefits of additional display types that you'll get by using the htmldb_item API against all the functionality you'll get by using the built-in tabular form and multi-row update features.
Regards,
Marc

Cannot print in Adobe 9 it will only print to file which does not work

I cannot print a PDF file that is in Adobe 9. It is not the file, I opened several other files and they all do the same thing. INstead of printing. When I click OK after choosing the printer, it goes into a print to file mode. The print to file always fails and then it will nto print. This morning it was working fine. Now it will not print. It may have installed an update to Adobe 9, I do not remember it being 9 before. I am in trouble if I cannot print tonight. Any ideas?

WHat is a "print dialogue?n How can I find it" There is nothing that I can find called print dialogue.
Where do nI find "print to file in order to disable it?

Printing an ABAP report does not work

Similar Messages

Maybe you are looking for