Printing an image in the centre of the page

Uhhhh, anybody know how to do the above?
Sometimes I print documents and there clipped, so I'n page setup I reduce the page to 90%, but when I print it I cant centralise the document, it always stays bottom left.
Thanks for you time.

igrok,
I'm not sure exactly what you are asking for. Do you want a detailed explanation of the steps gone through to try to print a particular type of document from a particular application, or do you want to see a screenshot of the preview and print dialog, followed by a scan of the clipped output? I think I have figured out what is happening in my case, though I'm not sure if the cause is rooted in the OS, or in the HP printer drivers I am using.
As an example: If I try to print a PDF document which was scanned from an 8.5" X 11" original, obviously the bottom would be cut off by the printer without my either specifying a reduced print size or selecting "Scale each page to fit paper" in the print dialog. The problem is, when either one of these avenues is tried, the image is relocated to the left/bottom of the page, rather than centered in the printable area or at least at the middle/top. This behavior effectively places the bottom and sometimes left edges of the image outside of the printable area on the paper no matter how small a print size is specified.
I was able to find a partial workaround. If I print in landscape, and check the "Automatically rotate each page" option, the image ends up printed at the top/left of the sheet. This saves the bottom of images for me, but still cuts of the left edge occasionally.
As implied by the subject of the original post, there really should be an option to center the image on the page. There is not. This would merely be a small annoyance were it not for the fact that the scale to fit function is either broken in Leopard or in HP's drivers.
If you are interested in a screenshot of the print dialog illustrating this behavior, I can post one and provide a link.
Thank you for your interest and to anyone else who cares to look into this issue.
Otto

Similar Messages

Part of page "image" overlaps the page when printed. How do I fix this?

When printing from Acrobat 10.1.5, part of the contents of the page prints on top of the page itself. In my most recent case, the page is landscape. The portion of the page that overprinted is from the bottom center about 1 inch wide and 4 inches tall. It ended up on the top right of my page.
Portrait example - a similar sized "piece" from the middle of the 8.5" length, about 1 inch tall and 4 inches wide printed on the top left of my portrait page.
I have tried the quick fix - print as image - but that doesn't change anything. Help!

Hi Casey ,
You can check the properties of that calender option and if there is an option of opening the calender in the same page ,then please select that.
Or is it with the help of button option you have created the calender?
Regards
Sukrit Dhingra

How to print from top of the page?

Hi all,
This is Narendra.
I am facing following problem in report.
My report contains 4 groups in datamodal.
All groups have same parameters.
In report out put when second group goes to second page it is printed
from middle of the second page,insted of printing from top of the page.
What should i do to print from top of the page.
Plz suggest me a solution.
Regards,
Narendra.
[email protected]

Hello,
Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
Regards

Unable to display a PDF image on the page - Mac 10.6

Hi,
Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen this error before. The only info on the internet reveals error code 0x2511(9489).
I've deleted prefs, closed down and re-opened Indesign and even restarted the computer. I've also re-linked the images contained in the document and even created a new document and set it up the same, but still the same problem. Investigating further, other Indesign documents still export properly.
The only ones that don't export are 2 documents, both giving this same error message. Both documents are ones where a client has sent a PDF, I've imported into two of these into an 2-page A4 Indesign document (each PDF is 48MB each) and then just added a text layer (using Times) which is properly installed on the computer. I basically have to 'update' course dates for the client and add PDF to the website, all very basic.
I've tried importing a jpeg and other PDFs into the file (replacing the existing ones) and they export fine.
All my software is legal and I've exported this document before now in exactly the same File > Export without any problems (under 10.5 and 10.6).
OK... I've just imported the offending PDFs into Acrobat, optimized and shrunk the file size, re-imported back to Indesign and the PDF export works fine. So it seems InDesign / PDF Export doesn't like large imported PDFs? I think they were originally exported from Publisher, so maybe that's the problem or a file conflict somehow.
Any ideas on the culprit? I've googled it, searched these forums and Apple discussions and haven't found anything. Although I've found a workaround, I do get large files to import and then export. Thanks for any help
Steve

It does sound like a problem with the original PDF files the client sent you. You can check how they were made in Acrobat Pro from the Additional MetaData button on the Description tab of the document properties dialog. It will be under Advanced at the bottom of the list when the metadata opens.
You might be able to salvage them by running the optimzer and not changing the size, or just doing a Save As in Acrobat.

When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality. What am I doing wrong?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. Nowhere to fix the "page". It's crap. Please help

ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. My home page picture appears to "bleed" through. Nowhere to fix the "page". It's crap. Please help

I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder. (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!

Printing to any PDF printer results in an image of the page instead of searchable text from all websites

When I print to any number of different pdf printer software I've tried, it always yields an image of the webpage but never searchable text in the pdf which is the result of printing to pdf from IE or Chrome.

I suspected as much. I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected. I only installed the local printer to see if the RDP session
tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer. I am disappointed but not surprised.
Edit:
Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
to “Disabled” but
with no luck. In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether. I have concluded that this approach will not bear any fruit.

How do I print an image outside the paper or canvas area?

I have a gradient image I want to print outside the paper size or outside the canvas area. I have tried changing the document and print setup and nothing works. When I print, the page there is a white border around the entire page. Can anyone provide some suggestions?

As you suggested, I changed the values in the bleed (several times per image 1); however, it still prints inside the page showing a white border around the image (view image 2). Any additional suggestions?
Image 1 Image 2

Acrobat pro 9.5.5 is printing only part of the page

It looks fine on screen; it looks fine in the little preview when I print; but the actual printed page is mostly white, for this one page in a multipage document. No layers. Grey scale. This is a page that was combined with other PDF pages to form a document.
Mac OS 10.10.2

Replying to myself - after searching for a while, I tried "print as image" under Advanced... in the print window, and the whole page printed. Not sure what is going on but at least I have a work around. I'd still like to know whether other people I send PDFs to will run into the same problem.

Carousel don't show images, only the page name and a "read more" link

Good morning.
I'm trying to get a carousel in my page. I already set a image to one page and on my carousel component, I selected that page.
When I see the carousel, it shows me the page inputed name and a "read more" link instead of the image.
Can anyone tell me what's wrong or missed?
Heres a print screen:
Thanks.

What did I do to correct this problem:
When I create a page renderer component, the same automatically creates a jsp file, with the same name as the component. In my Geometrixx copy sites, there's always a "content.jsp" file in the components, despite of the one with the same name of the component. So, instead of build my pages in the componentname.jsp, i'm doing this is these content.jsp. Just doing this, the carroussel works perfectly. For sure is something that I miss in my own jsp files, but even with the same code (copy > paste), in my jsp the carroussel don't work. Anyway, now I can use it.

When I try to print in booklet form, the pages are scaled down greatly.

I am trying to print an excel sheet (converted to PDF) in booklet form through Adobe Reader. It is full size in Reader, but when I switch it to booklet form, the pages become very small. I understand that each page fits on one half of a piece of printer paper in order to be folded, but they become extremely small.

. I am not allowed to select. I think I hve to change a setting, bt what?
David, have you enabled the "Autoflow" options? There are settings behind the cogwheel, that will automatically place unused images onto new pages. If you only want to select a few images from a large project, disable these two options:
Or start your book froman album, that only contains a selection of your images, rather than from the whole project.
Reagrds
Léonie

I can't print web pages since a recent upgrade to 4.01. The print command works but the page comes out empty. right now a copy the link to IE and print from there. HELP!

When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser.
I have to copy the link to IE (boo!) to print the coupon or page on my printer.
Why?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

How can I export/save my iphoto'11 photo book pages as actual images of the pages (jpeg), not PDF?

I have 'printed' the book as a PDF, but would like to get a jpeg version of each actual page (not the individual photos). So far, I have tried 'exporting', but that gives me each pic individually, sharing-same thing.
My goal is to upload the finished pages onto a family website.
Any suggestions?
Thanks.

Open the PDF file in Preview and start a Print job. In the Print window click on the PDF button and then in the resulting menu select Save PDF to iPhoto. That will create a jpg version of each page and import it into an album of your choosing in iPhoto.
Click to view full size
This is what you'll get in iPhoto after the import:
Click to view full size
Note: As soon as the book has been processed into iPhoto select all of the pages and use the Photos ➙ Batch Change ➙ Title to Text menu option to rename the pages as "Page " with the option to include a sequential number at the end. That's because the jpgs that are created have really crazy file names which will make it difficult to get in order if they ever get out of order.
OT

How can i print logo in all the page

i've created a form(SAP script) which have five page.pls can anybody tell me how can i print logo in all the five page?

hi,
u can try this in
windows
change window type as CONST or MAIN.
cheers,
sam

Printing an image in the centre of the page

Similar Messages

Maybe you are looking for