Printing application ALWAYS running after printing

I would like to see if I am the ONLY one who found that when you print, the printer application stays running and you have to manually quit the application!!?? BEFORE Leopard, you didn't have to do this and I cannot see where I can have this automatically quit AFTER sending all to the printer!
Any suggestions other than going back to the previous version of the OS...

Open the printer's queue application (or print something, and as you noted, it'll stay open).
Right-click -- or control-click -- on the application's icon in the dock.
Select the "Auto-quit" item, see that it's checked, and then quit the application.
Voilà! Next time you print it'll quit on its own.

Similar Messages

  • HOW TO DELETE DUNNING RUN AFTER PRINT OUT?

    Dear all,
    does anybody know if it's possible to cancel a dunning run after the notices have been printed (except manually by changing all documents and all master data)
    WITH ADVANCE THANKS
    KRISHNA KUMAR

    Hi Krishna,
    Why do you want to re-run the Dunning run after printing them out?
    Anyway there is a program SAPF150D2 that enables you to re-edit the Dunning run. However whilst a Dunning letter is not a legal letter it is binding and so to add some control to SAP I am sure there is not a way where you can cancel the run and start again. What is to say that you send the wrong letters out.
    You can create a simple program to go to FB09 to delete the Dunning level and the date of the last Dunning run.

  • Problems printing from other programs after printing using Word automation

    I have an application that uses ActiveX to build a Word document. My print VI is attached. The problem that users are reporting is that after printing a report with my application, they can't print from any other programs until they restart their computer.
    After my print VI runs, the only other Word automation is Document.Close and Application.Quit. I close all my references religiously and winword.exe closes just fine. I don't know what would be hanging around causing other programs to have trouble printing. One thing I don't like is the ActivePrinter property in Word. It changes the default printer in Windows. This is why I reset it using the printer LabVIEW reports as the default. I tried reading ActivePrinter and storing it in a wire, then resetting it with this string, but then even weirder things happened - the printout got all messed up. This is why I'm using the printer that LabVIEW says is the default.
    Has anyone ever encountered anything like this?
    Message Edited by Marc A on 01-12-2007 11:03 AM
    Attachments:
    Word_print.PNG ‏18 KB

    goldn:
    Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
    1 - create the card and type Command-P.
    2 - select Stylus Photo R200 under Printer
    3 - click on the Advanced button
    4 - in the bottom drop down menu select Paper Handling
    5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
    6 - now select Print Settings in the 3rd drop down menu
    7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
    9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
    10 - click on Print
    11 - when the paper exits the printer quickly put it back in the printer
    That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

  • Printer stays in doc after print job

    Hello
    Since I moved to Leopard, I notice that when a print job is done, the printer icon/app stays in the dock. I have to Quit the app for it to go away.
    As far as I can remember, in previous OS versions, the printer app would appear in the dock and when the print job was over, it would quit automatically.
    How can I get it to automatically quit after a print job, in Leopard?
    Thanks

    David King1 wrote:
    Hello
    Since I moved to Leopard, I notice that when a print job is done, the printer icon/app stays in the dock. I have to Quit the app for it to go away.
    As far as I can remember, in previous OS versions, the printer app would appear in the dock and when the print job was over, it would quit automatically.
    How can I get it to automatically quit after a print job, in Leopard?
    Thanks
    I believe that leaving the printing system running (which is why it stays in the dock) is based on the assumption that you may wish to print again and don't want to incur the startup delay each time you print a page or two. If my printer is on, I leave it in the dock. When I turn off the printer, I exit the printing system manually.
    As noted, there is an option to start it up each time you want to print something.

  • Checking compatibility of add-ons always running after update

    After updating Firefox to version 6, the checking compatibility of add-ons is always running with each start of Firefox, and "Welcome to Firefox" site is always opening as well.
    This is very disturbing.

    Apparently I wasn't clear or the word upgrade wasn't right. I meant going from 4 to 5. I downloaded it, installed it and got no option resembling that at all, it just saved a DMG to my hard drive and then told me to put it in my applications folder as always. I opened it and that was that, no compatibility check. I already got one error about an add-on that's vital. I'd backed up before I installed and saved Firefox 4 as a separate file before opening 5, I hope I'll be able to go back to it. The old system was really much better, what's the point of finding out after you already installed something if your systems will work? Or of avoiding installing because you're afraid they might not when everything very well might be fine? I can guarantee you that I won't be installing an major updates for a very long time, that's for damn sure.

  • Printer won't quit after printing

    After I print anything from my eMac to the HP laser printer it is hooked up to, the printer icon stays in the dock with the little arrow under it showing that it is open. It won't quit automatically; I have to manually go in and quit the printer. I tried looking in the dock and print preferences, but couldn't figure out how to get the printer to quit automatically once it is done. Any help would be appreciated, since this is a new computer in my school lab (although the machine itself isn't new), and the kids love to click on anything they see, so the less they see, the better.
    Thanks in advance!

    Hi
    I see.
    Have you by chance set the Docked icon to Keep In Dock, found by clicking and holding down on the docked icon?
    Furthermore you say the printer icon stays open showing a green arrow, so is that both the printer utility and the printer both showing in the dock?
    i think normally, there should only be the printer utility, a green open printer symbol doesn't ring a bell, so to speak.
    roam

  • Printing an additional Form after printing an Invoice

    I need to setup SAP B1 to print another form AFTER printing the A/R Invoice. This form needs to use items from the invoice ( item, qty) to populate fields. Any ideas on how to accomplish this?
    TIA
    Jeff

    Jeff,
    You probably need Crystal Report to make two forms under one report.
    Thanks,
    Gordon

  • Why can't I print to wireless printers after printing via USB?

    We're all wireless in my office. I can print to any number of nearby printers with no problems EXCEPT AFTER I print to my personal Epson printer via USB. I've tried turning my computer on and off, and I've also tried switching to another wireless network and switching back. I still can't print to the other wireless printers. The "Nearby Printers" list doesn't even show up in the Print menu after I use my Epson. In System Preferences, the Print & Fax menu of Hardware clearly shows my computer sees the printers on the network, but when I send a print job it says the printers are "offline". Is something affecting my drivers after printing USB? Ugh!

    This is an issue for your office IT guy.

  • Why printer driver stays open after printing?

    I have upgraded to 10.5, and every time I print on a shared or local printer, the dialog for that printer (the one that shows the document printing) stays open.
    Is there any solution for that?
    I have to manyally close the driver after page finish printing, and it happens with HB annd Epson drivers.
    Thanks a lot
    Pablo de Argentina

    While the icon is in your Dock CTRL- or Right-click on it and select the option to close authomatically.

  • Application cannot run after extending weblogic domain

    I create a weblogic domain using jdeveloper 11.1.1.4. I deploy some adf applications to this domain. These applications are fine.
    Then, I install SOA Suite 11.1.1.4 and extending the above domain. However, these adf web applications cannot run. What's happening?

    Can you post the exceptions?

  • Applications still run after user logged off

    Hi,
    I have a w2k8r2 Terminal server and have a problem that have eluded me for some time now.
    When a user is logged off, by either being disconnected or being inactive for a prolonged time, the user initiated programs are still running.
    To be more exact, Some times when a user is logged off I have the following situation:
    In the task manager on the users tab I cannot see the user anymore (nor in the remote desktop services manager), but in the Processes tab I can still see user initiated programs running. Furthermore I am not able to kill any of those programs, getting an
    "Access is denied" error message.
    My problem is that when the Terminal Server enters this "state" it becomes all buggy and itchy, causing loads of problems for the users that are already logged in (and for the new ones trying to log in). The only solution I have found is rebooting
    the server.
    Any solution, or further troubleshooting steps, are more than welcome. For me the next step is reinstalling which I really don't want

    1. Check any task schedular is running for application or not,
    Refer :
    http://answers.microsoft.com/en-us/windows/forum/windows_7-security/if-i-log-off-at-night-leave-computer-on-will/559eec53-1d2a-46f8-ac12-f0d4a32ab57a?msgId=b51d42b3-e727-40c0-b94e-8a01b31bf526
    2. Also update Antivirus and scan completely.
    3. Is it specific application or all the application, Which user opened in his session?
    4. If specific application is running (In this scenario Outlook is running even user logs off), Try the below Citrix forum thread.
    Refer :
    http://discussions.citrix.com/topic/301644-user-logs-off-process-outlookexe-stays-active-error-the-citrix-server-has-reached-its-concurrent-application-limit/
    5. Check and update  TCP/IP driver
    Refer : http://support.microsoft.com/kb/2465772/en-us
    6. Also cross verify Dharmesh suggestions also.
    Regards,
    Manjunath Sullad

  • Getting waved-horizontal lines running through my photos...Happens not during time of working image in photoshop...but appears when sending to files or other applications, such as after printing back to files...?  Mac checked out OK.

    Getting waved-horizontal lines in my imagery just after working in photoshop...sending to files as with after completing some applications, such as printing. Nothing is wrong with my Mac...Issue does not occur every time I go into using Photoshop?

    Doesn't matter what kind of file...size, jpeg or tiff, black and white as color, etc...Something is in the software issue for my upgraded CS 5 Photoshop, running on a Mac OSX with Leopard version. The CS 5 Adobe software was in an up-grade from CS 3. Best I can do and I thank you for any suggestions based on your experienced background as I can only offer a general interpretation with the waved-horizontal lines that run across some of my images from being in the Photoshop mode from Bridge.

  • C6380 Printer's always running out of ink. Is there a way to check printer use history?

    c6380 printer always seem to run out of ink. Is there any way to check printer use history. No one owns up to using it much, but we also seem to run through paper. Maybe the pets are secretly using it?

    Hi - This may not be exactly what you're looking for but the Extended Self-Test page does provide a page count.  It doesn't give you a history of when pages were printed, but it will at least tell you have many pages have been printed overall.
    Hope that helps.
    Kevin
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Printer app stays open after printing

    even after selecting "auto-quit" with ctrl-click in the dock!
    Is there a fix? (this happens on different printers)

    Other users mentioned that it was necessary to delete and re-add the printer to get this to stick.
    Hope this helps.

  • Flex 4.5 mxml based application not running after iOS packaging on i pad

    I have created one mxml based application on flex 4.5 and make the .ipa file by iOS packaging of adt command.The command  goes as followes
    adt -package -target ipa-debug -storetype pkcs12 -keystore  development_key.p12 -provisioning-profile flex_air.mobileprovision  testIphone.ipa testIphone-app.xml testIphone.swf
    The .ipa files are generated in the root folder of the C:\Program Files\Adobe\Adobe Flash Builder 4.5\sdks\4.5.0\bin folder.
    But when I am running that file in Ipad it is not working.Cant install that application on Ipad.
    Can anybody have any solution for this??

    Hi Debarghya:
    As you mention "Cant install that application on Ipad." I am assuming that you can't get it on your iPad if that is the case. There are two things you should check.
    1. Does your mobileprovision has your device added to it, on iTunes portal?
    2. Make sure the id tag in testIphone-app.xml matches with your application identifier for which you created this provision and certificate on iTunes portal.
    If the problem is that application is installed on your iPad. But when you launch you see black screen forever or application closes automatically to take you to home screen.
    1. try with  -target ipa-debug-interpreter instead of -target ipa-debug and see if application starts and post your findings back.

Maybe you are looking for