Printing as another user issue...

Hey guys,
I have 2 accounts, 1 is a domain admin account, the second a regular domain user; When I print
using my regular account to a shared printer (print server), the server shows the owner is my
domain admin account, but when I print to my local printer (no print server) it shows my regular user as the owner.
I'm not running the software I'm printing from as the domain admin.
What can cause this and how can I fix it?
Thanks,

Most likely, the credential manager has the domain admin credentials for the connection to the server.
Since you did not include the necessary information, I will make some assumptions and you can correct me.
You have a client machine running Windows 7. The print server target is Server 2008 or greater. You have a queue view open on the client for the print share which is where you see both names.
If my cred manager postulation is correct, the print job is created with the user account information. The queue view is a representation of the local print job when Rendering on the Client is enabled, and the job when it goes to the print server.
When you see the regular user name, the print job is on the local machine. After it is copied over to the server, it has the domain security token so you see that user name.
check
Control Panel\All Control Panel Items\Credential Manager
Alan Morris Windows Printing Team

Similar Messages

Cannot print checks "while another user is accessing the account"

I am trying to print couple of checks but I receive this message:
u201CCannot print while another user is accessing the account message [854-235]u201D
I check there is no one using the system just me and still same issue.
Thanks.

Hi
Please check where your printing has been locked under house bank setting .
Here you go in detail
You are requested to please check Note no 957329 regarding your issue.
The following steps should be performed:
1. Click on Administration -> Setup -> Banking -> House Bank Accounts
2. Scroll to right hand side of screen for column Lock Checks Printing
3. Untick the box
When trying to print a check you should now no longer recieve the error
message.
Thank you
Bishal
Edited by: Bishal Adhikari on Apr 13, 2009 11:05 AM

Another User Modified the table

Hi,
I have a user defined form, which is bound to Master-Data UDO.
I have matrices in the form which is bound to its child objects.
Following problem happens once in a while:
When I press update button, I get the error message 'Another User Modified the table'.
This is not consistent, but happens once in a while.
My SBO version is 2007.
In what situations you will get the error - "Another User Modified the table" ?
Please help me with this.
I'll appreciate your help.
Thanks.
-Geetha

Hi Mahendra,
Thanks for your reply.
In my case, I take back-up of the database from client site and bringing into our in-house.
If clients complained about record# 25, then the same record# has the 'Another user' issue in in-house also. (By record# I mean the Master UDO DocEntry#).
So, I think the locking is stored in the database, rather than in a PC specific place.
Please tell me any ideas you get in this angle.
Regards,
Geetha

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

Issue creating a MatView for another user w/ a private DB Link

I am having an issue creating a materialized view for another user where the select statement for the MV uses a private db link. Looks like the following:
Logged in as user X, I run:
create materialzied view Y.foo
(select blah
from tbl@y_priv_db_link_here);
When I try to run this, I get a permission issue. User X has DBA privilege, user Y has create MV priv and has select priv on the table in the db link.
I can create this MV logged in as user Y. Cant create this logged in a user Y in test or prod environment, so this isn't an option.
Any ideas on how I can create this logged in a user X? I believe the issue here is that since this is a private db link owned by user Y, user X doesn't have access to this db link.
thanks.

Here is what I was trying to do:
SQL> CREATE MATERIALIZED VIEW extract.ADDRESS
2 TABLESPACE xxx
3 BUILD IMMEDIATE
4 REFRESH
5 COMPLETE
6 ON DEMAND
7 WITH PRIMARY KEY
8 AS
9 ( SELECT ... FROM address@CM_TO_CPD);
FROM pwb_address@CM_TO_CPD)
ERROR at line 11:
ORA-01031: insufficient privileges
Message was edited by:
Jim S

Clear another user's print jobs from standard user account

I have Parallels set up to print from Windows through Bonjour printer sharing with Mac OS X. Periodically print jobs I've sent from Windows will hang, or for some other reason I need to cancel them. Because I usually use a standard user account, I apparently can't delete them from the print queue--or, rather, I can, but then they just appear again. I can get rid of them by fast-switching over to the admin account, opening System Preferences, opening the Print & Fax pane, opening the queue, deleting the jobs, logging out, and then logging back in to my standard account. But that's kind of a pain, and I've been trying to find a faster way to do it.
I have some extremely rudimentary knowledge of Terminal, and came across the sudo lprm - command, which seemed like it would do it. I had thought that sudo would just ask me for an admin password, but when I tried it, of course, I discovered that what it apparently actually wants is for my standard user account to be in the sudoers file (or, I guess, for me to have root enabled and use that password somehow).
But since I don't really know what I'm doing, and doing anything with sudo or root access scares the bejesus out of me unless I know exactly what I'm doing: Can anyone tell me exactly what I need to do here? Is there a way to run the lprm - command to clear everything out of the print queue with just an admin password, without requiring root access? Or have I gone completely off the rails and missed some other easy way to clear another user's print job from a standard user account without resorting to Terminal at all?
Thanks!

OK, never mind--I had assumed I needed to work some sort of admin privilege into the mix to do this, since that's what the GUI seemed to require, but it turns out that just using "lprm -" in Terminal clears it right out. Perfect!

Creating another User Account Issues

Hello-
I recently created another user account because of of corruption issues and need to have the same functionality in the new user profile. I transferred all the old user profile data to the new user profile as per instructions posted here:
Locate the C:\Users\Old_Username folder, where C is the drive that Windows is installed on, and Old_Username is the name of the profile
you want to copy files from.
Select all of the files and folders in this folder, except the following files:
Ntuser.dat
Ntuser.dat.log
Ntuser.ini
Click the Edit menu, and then click Copy.
If you don't see the Edit menu, press Alt.
Locate the C:\Users\New_Username folder, where C is the drive that Windows is installed on, and New_Username is the name of the new
user profile you created.
Click the Edit menu, and then click Paste.
If you don't see the Edit menu, press Alt.
Log off, and then log back on as the new user.
After doing this I have noticed some programs not launching the same with missing info. For example TeamSpeak3 launches but opens as a new user with none of my saved bookmark profiles even though they are listed in the directory file. To me
it has to be a permissions thing or User data transfer issue, because I have the user data in the old user app data file but none in the new user app data.
I am the only user of this computer so there is no user issues with other people and would like full functionality. Thanks in advance.

@ Kate Li thanks for responding and yes I did follow the instructions in the folder options to unhide and show all the files I didn't copy>paste that portion just to save room on the post. The link is the same as the one I used:
Click the View tab, and then click Show
hidden files, folders, and drives.
Clear the Hide protected operating system files check box, click Yes to
confirm, and then click OK.
One mistake I did make was to copy>paste the shortcuts when I know now to just create them from the program directory (send to desktop) context.
Would you happen to have a link explaining how to go about transferring or importing registry files?

Safety issue: Another user can access some read only folders of mine

Hi,
big, serious problem: I had created a simple account user for guest access on my 10.5.7 system. Now i logged into this account, opened the finder and browsed my supervisor's home directory. Some folders i had created in there were readable (including the websites folder). Okay, they were set to readable (read only, not read write) according to the Information Window (CMD-I).
But when i browsed them i decided to delete a file. I selected the file, hit the delete button and wooosh away it was. What the f..? I wasn't even asked for my supervisor' s password. It just had deleted the file.
Crosschecking by creating a new folder and moving it into the very same directory revealed i had write access. NOT GOOD! (scream!)
Anyone had the same shocking experience of OS X being not safe?
However, after i changed the permissions of the respective folders to "no permissions" and then changed them back to "read only", they at least were read only.
But hey - how can I tell which folders of mine are really safe? I can't check up every folder if another user on my system has "by accident" write permissions to a folder which reads "read only" in the Information Window.
Help!
Fox

Foxboy71 wrote:
Hi,
I've created the first folder as a "Data" Folder *inside my home directory* to archive Downloads of different kinds (Programs / Utils / all this stuff). i wanted to have these Downloads accessible for all Users so that they can get the Data out of this folder. So the path is /Users/(me)/Data.
The other folder is my "Website" folder, standard OS X.
The exact Information of the Info Window:
(Me) read&write
admin read&write
everyone read only
the User account in question is not an admin account.
now I'm completely confused. are you saying that you can write to this folder from a different account which is not an admin account?? that should not be possible based on these permissions. please double-check and make sure that the other account is not listed as admin in system preferences->accounts.
also, these permissions are wrong anyway. did you change them yourself? the default permissions on a newly created folder in your home directory should look quite different. log in as your main user and make a folder at the top level of your home directory. what are the permissions there?
P.S. the unknown user you see is quite normal if you upgraded to leopard from Tiger.
My account is an admin account.
Thanks for the reply,
Fox

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

AirPlay showing another users desktop. Security issue?

Has anyone else see this or can replicate it? Login as one user and airplay from mountain lion, stop, login as another user and air play to apple tv, it shows user a's screen despite user b having no access to user a. Just had my wife viewing my desktop, not a happy bunny.

That may be one reason the AirPlay icon changes color when active.

Save As window comes up when saving a WebI document another user modified

When trying to save a Web Intelligence document in the "Web" mode (not the java "Rich Internet Application" mode), users get a "Save As" window if another user was the last one to save the document. The user can simply select the same location and "overwrite" the existing report. They can also use the Rich Internet Application mode instead, since this does not have the same issue. After that, the same user can continue to save the report as usual, until another user saves it. The user has full control permissions to the document and to the folder.
This doesn't seem like it would be a big deal, but most of our users access reports using hyperlinks from other websites, which opens the document directly in the web mode; and they just make simple changes like selecting a different value in an input control. If the Save As window comes up, it takes them to their Favorites folder, and they usually don't know which public folder the report is stored in.

I can not print anything from Firefox but on IE everything prints just fine. I happen to like Firefox a whole lot better so would appreciate a solution to my problem.

I have Words with Friends app on iphone and game on computer. When I try to play with Facebook friends message says" Account Already Connected. This Facebook account has been connected to another user." How can I play game on iphone or my pc?

I have Words with Friends app on my iphone4S and the same game on computer. When I try to play Words with Friends with Facebook on the iphone the message says" Account Already Connected. This Facebook account has been connected to another user." It is connected to my computer. How can I play game on iphone?

Hi Grandmaz5,
If you are having issues connecting to Facebook on your iPad, and you have already troubleshot the Facebook app itself, you may want to check the built-in iOS settings for Facebook; you may find the following article helpful:
iOS: Using Facebook, Twitter, and other social network accounts
http://support.apple.com/kb/HT5500
Regards,
- Brenden

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

ITunes keeps restarting by itself on another user account

Problem began since I started using a new computer running Vista Ultimate, 64 bit. Even though a second account on the computer that WAS using iTunes closes it, when I go to MY account WITHOUT EVEN TRYING TO OPEN iTunes, window upon window opens telling me I can't run iTunes because another user is running it.
Then, when I go to the other account, I see iTunes OPEN! I'll close it, go to my account, and the windows keep opening again, telling me I can't run iTunes, even though I don't want to!
I wind up going to the Task Manager and closing iTunes helper and anything else I see with iTunes as the name.

I am running Windows XP and I've been experiencing this problem for a little while, not sure exactly when it started happening. Everyone once in awhile when I try to launch iTunes on my main user account, it won't run because it is running on another account (which I never want it to run on). I was just coming here to see if I can stop that from happening, I only ever want to run it on my main account.
I do notice that iTunesHelper is running on both user accounts, and that is probably directly related to my issue. I just plugged in my iPod and got the message than iTunes is running on another account - my guess is, with that iTunesHelper running on both accounts, it is luck which account sees it first and launches iTunes. However I have also received this message when I manually run iTunes as opposed to just plugging it in with the auto-detection.
That iTunesHelper is pretty inconsistent - I have seen it running on one account only, both accounts, and no accounts if I look in the task list. I think that is the main problem but I don't know how to prevent it from running on secondary user accounts.
In any event this problem is not isolated to Vista, and that is the main reason why I am posting in this thread.

Dead Lock what made by another user!(patition table)

I have a question about Dead-Lock!
Our Situation is ..
User "A" made a Patition Table, ACNT_WONJANG
(without any Trigger,Function, Procedure)
When "B" - another user - tried to drop its Partition,
Dead-Lock invoked.
but A droped it's Partition well.
What can i Do?
this is the trace file.
/oracle/home/admin/ACNT/udump/ora_44478_acnt.trc
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
ORACLE_HOME = /oracle/home
System name: AIX
Node name: acnt
Release: 3
Version: 4
Machine: 000C962D4C00
Instance name: ACNT
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 44478, image: oracle@acnt (TNS V1-V3)
*** SESSION ID:(16.394) 2001-10-04 15:00:41.829
A self-deadlock among DDL and parse locks
is detected. In most cases, this self-deadlock
is handled internally.
This should be reported to Oracle Support
ONLY IF an error is signalled back to the
user on a command-line or screen.
The following information may aid in finding
user on a command-line or screen.
The following information may aid in finding
the problem.
ORA-04020: deadlock detected while trying to lock object
F03P.ACNT_WONJANG
session: 440786b4 request: X
LIBRARY OBJECT HANDLE: handle=43108348
name=F03P.ACNT_WONJANG
hash=76b93583 timestamp=NULL
namespace=TABL/PRCD/TYPE flags=KGHP/TIM/SML/[02000000]
kkkk-dddd-llll=0000-0001-0001 lock=S pin=S latch=0
lwt=43108360[43108360,43108360] ltm=43108368[43108368,43108368]
pwt=43108378[43108378,43108378] ptm=431083d0[431083d0,431083d0]
ref=43108350[43108350,43108350] lnd=431083dc[4310824c,425b7ec4]
LIBRARY OBJECT: object=431080d0
flags=NEX[0002] pflags= [00] status=VALD load=0
DATA BLOCKS:
data# heap pointer status pins change
0 431082d8 43108154 I/P/A 0 NONE
HEAP DUMP OF DATA BLOCK 0:
HEAP DUMP heap name="library cache" desc=0x431082d8
HEAP DUMP heap name="library cache" desc=0x431082d8
extent sz=0x224 alt=32767 het=8 rec=9 flg=2 opc=0
parent=30000030 owner=431080d0 nex=0 xsz=0x0
EXTENT 0
Chunk 431080c0 sz= 196 perm "perm "
alo=196
431080C0 500000C5 00000000 00000000 000000C4 [P...............]
431080D0 43108348 431080D4 431080D4 431080DC [C..HC...C...C...]
431080E0 431080DC 00000000 00000000 00020100 [C...............]
431080F0 00000000 00000000 00000000 00000000 [................]
43108100 43108144 00000000 00000000 00000000 [C..D............]
43108110 00000000 00000000 00000000 00000000 [................]
Repeat 2 times
43108140 00000000 431082D8 00000000 43108154 [....C.......C..T]
43108150 00000000 00000000 00000000 00000000 [................]
Repeat 1 times
43108170 00000000 00000000 00000019 00000000 [................]
43108180 00000000 [....]
Total heap size = 196
FREE LISTS:
Bucket 0 size=0
Total free space = 0
UNPINNED RECREATABLE CHUNKS (lru first):
Total free space = 0
UNPINNED RECREATABLE CHUNKS (lru first):
PERMANENT CHUNKS:
Chunk 431080c0 sz= 196 perm "perm "
alo=196
Permanent space = 196

carlyfromal wrote:
Here's the thing I myself have an Ipad 3 that I got from Ebay that is activation locked and I have the same issue. Can't get the info. Well,since Apple conveniently decided to discontinue selling the Ipad 3 the only way I could get one was to buy a used one,so it looks to me like they could have some mercy and help a person unlock the thing. We're not dishonest people that go around stealing things,yet because of Apple's brilliant(I use that term sarcastically) idea to put this stupid new crap in place people like us who have to buy second-hand products have to suffer and get screwed out of money we had to save up to buy this stuff! And all anyone can come up with is "well boohoo" or "tough luck" or whatever! But,what about the rights of the rest of us?! Some of you may find this a tad rude, but oh well,tough luck!
On the other hand, there are those of us that appreciate the theft protection provided by the latest IOS.
There are certain things to watch out for when purchasing used devices of any sort, the first of which is to ensure that you're not buying stolen property. Since you are unable to obtain cooperation from the seller, perhaps your device was stolen!

Printing as another user issue...

Similar Messages

Maybe you are looking for