Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

Hi,
I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code.
I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is:
ZLB_ZEB and Spool Server is: fihdev02_FDV_00
In SE73, have created a new System Bar Code by name ZZEAN128 with the following parameters
00 00 10.00 CM 2.00 CM C128 000 .
In the Printer Bar Code option, ZBARCODE device type has been selected and in the Display Print Control page ZZEAN128 Bar Code, Prefix and Suffix has been assigned to the ZBARCODE Device Type.
In the copy of the LE_EAN128_SSCC00 Form I have assigned the ZZEAN128 Bar Code as a Character Format.
But, it is not printing the Barcode in the ZEBRA 110XI Printer.
How to overcome this problem.
Kindly guide me to fix it.
Thanks in advance,
-- Jessica

I have solved it myself.

Similar Messages

Printing handling unit number

Hi All SD Guru,
While working in the packaging process, I am unable to find out the way to print the handling unit number that is generated automatically after packing the articles. For the same task, I have assigned access sequence (0001) to out put type (0001) and assign it to output procedure. Finally I have assigned output procedure to package material type but not able to find out the solution. Is there any other configuration required for the same? which t-code is used to print the handling unit number? Please tell me the procedure step by step.
Thanks
Abhi

I have solved it myself.

How to re-use of handling unit number (SSCC)?

Dear,
We are implementing handling unit management to our customer and HU number is SSCC code. The inbound process intended to use is as follows:
1. Create purchase order with confirmation control key 0004 (shipping notification) and receiving storage location is a HU-managed storage location.
2. Create inbound delivery against the purchaser order via VL31N.
3. Pack HU in the inbound delivery and then post goods receipt.
Further, our customer is using fix SSCC on each pallet physically, so we will maintain external HU number range in SAP accordingly, but the issue is, how to re-use of the SSCC in the inbound process? Currently, once the HU (SSCC) is received in SAP, the system status will be PHEX and WHSE, then next time when the pallet is empty physically, we still cannot re-use of the HU (SSCC) in the inbound delivery for GR process in SAP.
Can anyone of you give me some suggestions how to re-use of handling unit (SSCC) in SAP?
Thanks in advance.
Br,
Jason

Hi Jason
As far as I know it cannot be done in any standard way. The only way is to reset the status of the HU using program ie make changes at Table level VEKP-HU_STATUS.
or during the final issue of the SSCC from the system looks for BADI/Exit to achieve the same or do it through batch program to reset the status
Regards
Jayaram

Auto PGI for only deliveries which contain a Handling Unit

It is possibe to setup automatic post goods issue when confirming the transfer order using :-
IMG menu path: Logistics - Execution - Warehouse Management - Interfaces - Shipping - Define Shipping Control - Define Shipping Control at the Movement Type Level
Mvt type 601 - setting Copy WM Quantity to option '4' -i.e. auto PGI
However this would then work when confirming transfer orders for ALL outbound deliveries.
I only require auto PGI to work for deliveries containing Handling Units.
Is this possible ? I imagined it might involve cloning mvt type 601 to another mvt type which would then be used
specifically for handling units.
Regards.
Phil.

Thanks for the reply, using VL06G in background is an option.
Is another possible option to use a Special Movement Indicator ?
WM mvt typ 601 could be copied to a new one e.g. 610. The interfaces table could then be setup so that Ref mvt type 601
with a Special Movement Indicator points to WM mvt type 610.
The issue I have is that I don't want to set the Special Movement Indicator on the Material Master (WM 1 view).
I know it is possible to define the Special Movement Indicator within MIGO as a default setting.
Is there something similar within the Outbound delivery ?
Regards.
Phil.

Solutions for creating and printing barcode for MII application

Hi all,
We need some help on solution about barcode creating and printing for MII applications. Would be greatly appreciated for any suggestions about the best option.
Our client is running MII 12.x. They also use Crystal Report. They don't have a lot of SAP resources and hence don't want to create Barcode using SAP smart forms. The new application requires reports to be printed out with barcode attached to it. The following are some options that we have identified:
1. Using Bartender software. MII will provide a XML file and feed to the software. The software can print out the content with the label.
2. Create a customized action block to create and store barcode on the server. Using a HTML page to display all the content with the jpeg/png version of the barcode. Print out through IE.
Any other options will be good too. Thanks in advanced for your responses.
Best regards,
UMeng

Thanks for the suggestion.
One concern I have is this package is developed for v12.0. According to SAP, these action blocks will work in 12.1 but not in 12.2. I've tried to install it on 12.2. The configuration dialog are not working properly.
Have anybody succefully implemented this package on 12.2?
Best regards,
Arnold
Edited by: Brad Arnold on Mar 2, 2012 11:53 PM
Edited by: Brad Arnold on Mar 2, 2012 11:55 PM

How to Print BARCODE in oracle RDF report

Hi,
We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.
Thanks & Regards,
Suresh

897745 wrote:
Hi,
We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.It's very easy. Download a font which show barcode then choose your desire field's font that font. I use IDAutomationHC39M font.
Hope this will help you.

Printing barcodes

I have an Acer Aspire Laptop which once upon a time, would print barcodes for various coupons. Now I am unable to print them. I print a coupon and the area where the barcode is supposed to be printed is blank. Would this be a printer error, a computer error, or some sort of softeware error most likely? Any DIY fix suggestions would be welcomed.

eldori1 wrote:
I have an Acer Aspire Laptop which once upon a time, would print barcodes for various coupons. Now I am unable to print them. I print a coupon and the area where the barcode is supposed to be printed is blank. Would this be a printer error, a computer error, or some sort of softeware error most likely? Any DIY fix suggestions would be welcomed.
There are certain settings in the printer where you may have background layers turned off, or have the printer to only print text and leave the images behind. You will need to go into the Control Panel for the printer you have and make sure the advanced settings don't have anything unusual unchecked on there that should not be unchecked.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Can we print handling unit label before assigning to delivery

I created handling unit and assigned the output type in the handling unit, I tried to create label through VL74 but not succeded. Kindly let us know whether we can print the label without assigning to delivery document.Kindly let me know if any other options are there.
THanks

Hi Prakash,
Thanks for your reply. I am bit confused with your statement. I create handling unit number and assigned output type in HU02, now i am trying to print labels from VL74 tcode, but failed. No results in VL74 output.
It seems VL74 can be used for HU prints only after assigning to Delivery number.
Regards,
Lakshmikanth

Serial numbers in Inbound delivery for Handling units

Hello Experts,
I have the following scenario:
Purchase order + Inbound delivery + GR
Inbound delivery is used because I need to create handling units, the materials included in these handling units are serialized and I am getting from the vendor an excel document with Handling unit number and the serial numbers included in each handling unit.
So I would like to use this document to do the packing process in my inbound delivery instead of manually typing the serial numbers.
What would be the best option to do this?
I also need to do the same for MIGO when no HU are needed.
Any Ideas??
Thanks a lot in advance for your comments.

Thanks a lot for your quick answer.
I would like to avoid creating my own Z transaction, is there any point in packing process where I can include some enhancement to upload the serial numbers, I gues the HU and packing process can be done manually by the user.
I was planning to enhance MIGO for the same process without handling units and I know that there a tab can be added at item level. But I do not know where or how to do it while packing.
Any suggestions?
Thanks a lot for your time!

Handling Unit not being assigned to TO for an outbound delivery

Hi All
When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO.
I cannot confirm the TO as it complains about the non assignment of HU.
I have done the following so far:
1. Set up a default packing material w.r.t WhNo and movement type.
2. Defined a packing group and then assigned the packing group to the packing material.
3. Set 1 to the indicator for automatic HU creaion in customizations for automatic HU creation.
Is there something I am missing in the configuration?
Any suggestions would help.
Thanks,
Arup

Hello,
HU never get assign at the time of creation of TO. You can assign pick HU at the time of confirmation of TO. There are two ways
Use transaction code LH01 and assign pick HU
OR
(ii)Or at the time of confirmation of TO click on pack tab and complete the packing
Thanks,
Milind C

User exit/BADI for Deleting the Empty Handling unit

Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.

Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan

Extrernal Number Ranges for Handling Units in COWBPACK

Dear Friends,
I need to activate external number range for handling units in COWBPACK transaction.
When I run COWBPACK, I don't get any field to enter Handling Unit Number.
Can anybody suggest the way out.
Regards,
Harsh

OK

Print Prog-Auto Print Barcode Label for Goods Receipt(MIGO) using Smartform

Hi Guru's
I have created a smartform that prints barcodes on a label.
My tests print successfully to the Printronix thermal label printer.
Is there perhaps a SAP Standard print program that i can use in my output type that will call my smartform upon goods receipt(MIGO)?
please bear in mind that i am looking for a print program that calls a SMARTFORM. not a sapscript.
/SMB40/M07DR does not exist on my system. and I am going to use output type WEE1 - for LABEL Printing
Awaiting your feedback.
Thanks in advance geniuses!

Good luck dude,
In that same program I noticed We01 that will print a smartform GR. I think if you use form entry_we01 in your output control you should do well.

Reg. Printing Barcode numbers for BC_I25 / BC_I25C in Smartform

Dear Experts,
I have a requirement that i need to print numbers along with barcode BC_I25 / BC_I25C using SMARTFORMS. When i tried to create a production order, i am getting barcodes printed in smartforms, but i am not getting barcode numbers printed below it.
Kindly help me in this regard,
AbapNag

Hi,
Create an entry for the barcode in SE73. (System & Printe Barcodes)
At Script level, you have to create & assign a char format with this barcode to your element.

Printing barcode in HP laser jet through smartform

Hi folks,
can i print barcode in HP laser jet P3005 PCL6 by using smartform???
plz advice.
regards
smita

Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
I am attaching the list of BARCODE supported printers
List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
OSS NOTE : 8928
Installation of new device types ********************
Many device types are appended as a zip-attachment to this note.
README.TXT contains information about these device types and codepages.
README_UPLOAD.TXT contains information on how to import the device
types.
PRINTER DRIVERS AND DEVICE TYPES:
In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
At present, there are five SAPscript printer drivers. They include:
for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
for PostScript printers (PS level 2)
for PRESCRIBE (for example, Kyocera FS-1500)
for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
for all other models.
The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
COMPATIBLE PRINTERS:
Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
LIST OF PRINTERS:
This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
The device types named in this list are supported in the standard R/3 System as of the release mentioned.
If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
Check related notes attached for addition information on printer supportin R/3.
Related notes:
Note 135894 contains information on printing labels on special label printers.
Note 05196 contains information on printing bar codes with SAPscript
Note 94233 contains information on printing MICR font with SAPscript
Note 62178 contains information on device types for the Japanese version of the R/3 System.
Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
Note 98477 informs you on device types for printers by the manufacturer PSi.
Note 107938 contains information on device types for printers by the producer Tally.
Note 141719 contains information on device types for printers from the producer Printronix.
Note 141914 contains information on device types for printers from the producer Lexmark.
Note 153879 contains information on compatible printer models of producer EPSON.
Note 154494 contains information on compatible printer models of producer Genicom.
Note 199166 contains information on device types for printers from the producer Hewlett Packard.
Note 214187 contains information on device types for printers from the producer Océ.
Note 398236 contains information on device types for printers from the producer Sharp.
Note 408189 contains information on device types for printers from the producer Konica Minolta.
Note 436609 contains information on device types for printers from the producer Xerox.
Note 458047 contains information on device types for printers from the producer Ricoh.
Note 485240 contains information on device types for printers from the producer SAVIN.
Note 485244 contains information on device types for printers from the producer NRG.
Note 516687 contains information on device types for printers from the producer Lanier.
Note 516669 contains information on device types for printers from the producer Gestetner.
Note 878109 contains information on device types for printers from the producer Danka.
ASCIIPRI
Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
COMPU960
Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
DECLA75P
Device type for the DEC line printer DEC LA75 Plus.
DECLN07
Device type for the DEC laser printers LN07 and DECLaser 1100.
HP256X
Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
HP2930
Device type for Hewlett-Packard's HP2930 line printer.
HPDJ500
Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
HPLJIIID
Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
HPLJSTND
Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
HPLJ_II
Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
KYOF1000
Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
KYOF1200
Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
MT600
Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
MT600GER
Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
MT600NDA
Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
OKI341
Device type for the OKI Microline 3410 line printer.
POSTSCPT
Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
S4440XTG
Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
SAPWIN
Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
Important Note:
As of Release 3.0E, you can use SAPWIN to:
Print proportional fonts and lines/boxes in SAPscript
Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
See Note 39031.
SWIN
Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
SNI4009
Device type for the Siemens-Nixdorf SNI 4009 line printer.
SNI4010
Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
SNI9014
Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
SNIZD13
Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
CIP1000
Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
EPESCP
Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP2
Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP9
Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
EPLQ550
Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HP2300
Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HPLJ4
Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
IBM239X
Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
IBM4226
Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
IBM4232
Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBM6408
Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBMAFP
Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP is for use on R/3 UNIX and Windows NT platforms.
IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMAFP3
Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP3 is for use on UNIX and Windows NT platforms.
IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMSCS
Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
LX4039
Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
KYOFS150
Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
NECP30
Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
NECP72
Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
NECPW
Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
SNI4011
Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
SNI20XX8
Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
MT2033
Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
MT2045
Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
DEVICE TYPES NEW TO RELEASE 3.1G:
HPDJ660
Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPDJ850
Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPLJ5SI
Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
MT6045
Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
NEW DEVICE TYPES IN RELEASE 3.1H:
MT691
Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
NEW DEVICE TYPES IN RELEASE 3.1I:
SAPWIN5
Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
DEVICE TYPES IN RELEASE 4.0A:
HPLJ5
Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
I2HP4
Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
I2SWIN
Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
SAPlpd 32 bit version, from 4.00
Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
R/3 Release 3.0E or higher
Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
I7SWIN
Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
SAPlpd 32 bit as of Version 4.00
MS Windows NT 4.0 or Greek Windows 95
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
NEW DEVICE TYPES IN RELEASE 4.5A:
HPLJ4000
Device type for the Hewlett Packard LaserJet 4000 printer and
related models such as LaserJet 5000, 8000, 8100 and 8150.
HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
I9HP4
Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
KYOFS170
Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
POST2
New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
NEW DEVICE TYPES IN RELEASE 4.6A:
IXLINK
Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
OCR-A and OCR-B fonts as well as bar codes are supported.
NEW DEVICE TYPES IN RELEASE 4.6C:
HPLJ8000
Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
HPLJ1100
Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
Device type HPLJ1100 can only be used in Releases as of 4.6C.
I9SWIN
Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
SAPlpd 32 bit as of version 4.00
MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
IBMNP
Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
NEW DEVICE TYPES IN RELEASE 6.10:
IBMIP12
Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP21
Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP32
Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP2K
Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP60
Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP70
Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBM4247
Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
NEW DEVICE TYPES IN RELEASE 6.20:
IBM6400
Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
HP1200
Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
HP1200 is compatible with all releases from 4.0A.
HP2200
Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
HP2200 is compatible with all releases from 4.0A.
HP2250
Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
HP2250 is compatible with all releases from 4.5B.
Attention: Business Inkjet 2200 is not compatible with HP2250.
HP2500
Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
HP2500 is compatible with all releases from 4.0A.
HP3200
Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
HP3200 is compatible with all releases from 4.0A.
HP4100
Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
HP4100 is compatible with all releases from 4.0A.
HP4550
Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP8150
Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
HP8150 is compatible with all releases from 4.0A.
HP8550
Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP9000
Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
HP9000 is compatible with all releases from 4.0A.
NEW DEVICE TYPES IN RELEASE NW04:
BRHL
Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
OCR-A and OCR-B fonts as well as bar codes are supported.
BRHL is compatible with all releases from 4.5A.
IP2085
Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2085 is compatible with all releases 4.5A and higher.
IP2085P
Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2085P is compatible with all releases 4.5A and higher.
IP2105
Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2105 is compatible with all releases 4.5A and higher.
IP2105P
Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2105P is compatible with all releases 4.5A and higher.
LEXT622
Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXT622 is compatible with all releases 4.5A and higher.
LEXW820
Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXW820 is compatible with all releases 4.5A and higher.
LEX4227P
Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
OCR fonts and barcode printing from SAP are not supported.
LEX4227P is compatible with all releases.
I5LEX
Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
I5LEX is compatible with all releases 4.0A and higher.
CNLX522
Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
CNLX522 is compatible with all releases 4.0A and higher.
JPLX522
Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
JPLX522 is compatible with all releases 4.0A and higher.
KPLX522
Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
KPLX522 is compatible with all releases 4.0A and higher.
TWLX522
Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
TWLX522 is compatible with all releases 4.0A and higher.
HP5000
Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
HP5000 is compatible with all releases from 4.0A.
HP23
Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
HP23 is compatible with all releases from 4.5A.
HP3000
Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
HP3000 is compatible with all releases from 4.5A.
HP4300
Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
HP4300 is compatible with all releases from 4.5A.
HP4600
Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
HP4600 is compatible with all releases from 4.5A.
HP5100
Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
HP5100 is compatible with all releases from 4.5A.
HP5500
Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
HP5500 is compatible with all releases from 4.5A.
HP9500
Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
HP9500 is compatible with all releases from 4.5A.
I2HPPS
Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
I2HPPS is compatible with all releases as of 4.0A.
Barcode printing and OCR fonts are not supported.
CAN105
Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
CAN105 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN22
Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
CAN22 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN5
Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
CAN5 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN85
Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
CAN85 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CN105PS
PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
CN105PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN22PS
PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
CN22PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN5PS
PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
CN5PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN85PS
PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
CN85PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CAN400
PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
CAN400 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN400PS
PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
CN400PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CANC32
PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
CANC32 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
ARM205
PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
ARM205 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM276
PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
ARM276 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM450
PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
ARM450 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM550
PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
ARM550 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARC262P
PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
OCR fonts are not supported.
CAN2220
PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
CAN2220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN2220P
PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
CN2220P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CAN5020
PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
CAN5020 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN5020P
PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
CN5020P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3100
PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
CNC3100 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC31PS
PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
CNC31PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3220
PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
CNC3220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC322P
PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
CNC322P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC6800
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
CNC6800 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC68PS
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
CNC68PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31E
PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
CNC31E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31EP
PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
CNC31EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322E
PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
CNC322E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322EP
PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
CNC322EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68E
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
CNC68E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68EP
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
CNC68EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CN2270
PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
CN2270 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
CN2270P
PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
CN2270P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
DL3100
PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
DL3100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL3100P
PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
DL3100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100
PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
DL5100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100P
PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
DL5100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
HP3700
Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
HP3700 is compatible with all releases as of 4.5A.
HPBI23
Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
HPBI23 is compatible with all releases as of 4.0A.
HP9055
Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
HP9055 is compatible with all releases as of 4.5A.
HP9065
Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
HP9065 is compatible with all releases as of 4.5A.
I7HP4
Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
I7HP4 is compatible with all releases as of 4.6B.
HP4250
Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
HP4250 is compatible with all releases as of 4.5A.
HP1160
Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
HP1160 is compatible with all releases as of 4.5A.
HP1320
Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
HP1320 is compatible with all releases as of 4.5A.
HP2430
Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
HP2430 is compatible with all releases as of 4.5A.
HP3030
Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
HP3030 is compatible with all releases as of 4.5A.
HP4650
Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
HP4650 is compatible with all releases as of 4.5A.
HP5550
Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
HP5550 is compatible with all releases as of 4.5A.
HP9850
Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
HP9850 is compatible with all releases as of 4.5A.
HPLJ9050
Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5A.
HPOJ9130
Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
HPOJ9130 is compatible with all releases as of 4.0B.
HP4345
Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
HP4345 is compatible with all releases as of 4.5B.
HP9040
Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
HP9040 is compatible with all releases as of 4.5B.
HP9050
Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5B.
HP9500M
Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
HP9500M is compatible with all releases as of 4.5B.
IP2060
Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2060 is compatible with all releases 4.5A and higher.
IP2060P
Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
IP2060P is compatible with all releases 4.5A and higher.
IP2075
Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075 is compatible with all releases 4.5A and higher.
IP2075P
Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075P is compatible with all releases 4.5A and higher.
IP2090
Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090 is compatible with all releases 4.5A and higher.
IP2090P
Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090P is compatible with all releases 4.5A and higher.
IP2105E
Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105E is compatible with all releases 4.5A and higher.
IP2105EP
Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105EP is compatible with all releases 4.5A and higher.
OKI6100
Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6100 is compatible with all releases as of 4.5A.
OKI8300
Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
OKI8300 is compatible with all releases as of 4.5A.
OKI9500
Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI9500 is compatible with all releases as of 4.5A.
OKI4350
Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI4350 is compatible with all releases as of 4.5A.
OKI5400
Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI5400 is compatible with all releases as of 4.5A.
OKI6300
Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6300 is compatible with all releases as of 4.5A.
SML1451, SML1451

Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

Similar Messages

Maybe you are looking for