Printing barcode using oracle graphics

Hello Folks,
I am trying to create bar codes using reports & graphics. The
report documentation (chapter 06) does have guidance but which
is not clear on the graphics side.
Is some one can elaborate little more on this?
Regards.
null

Spencer is correct...
but, watch out for the DEVICE you are reading the
bar code with...the wand, bar gun...etc.
what we had to do ( my team )
was to put and "*" before the bar code
and a "*" after the bar code for our gun to read
the code...then is worked...
patrick
from the 3of8.ttf
go to the control panel
find FONTS and click on it
once the program displays all your FONTS
click on the menu FILE and then click on
INSTALL. this will ask you where the 3of9.tff is located
..find the location,
then install.
in your oracle report,
click on the FONT to install 3of9...blah..blah
good luck
Spencer Tabbert (guest) wrote:
: Its really quite simple to print barcodes. Essentially a
: barcode is no more then a different font which needs to be
: installed on your pc. Dev 6.0 does ship a sample barcode font
: which you can install if you would like. Do a search for the
: font named 3of9.ttf then copy this file into your fonts folder
: which is located in your control panel. When wanting to print
: the barcode out just change the font type for a particular item
: on your report to the barcode font.
: Spencer Tabbert
: mjs (guest) wrote:
: : Hello Folks,
: : I am trying to create bar codes using reports & graphics.
The
: : report documentation (chapter 06) does have guidance but
which
: : is not clear on the graphics side.
: : Is some one can elaborate little more on this?
: : Regards.
null

Similar Messages

  • Urgent!! Printing Barcode using smartforms

    req: need to print barcode using smartforms.
    【Settings】
    The following settings are made already
    1.  Style ( paragraph, character type(Syatem Barcode ) )is created and activated (T-code:Smartforms)
    2.  In the smartform I used the above style to print barcode  .
    ※TEXTTYPE = TEXT ELEMENT.
    【Execution】
    1.  I run the smartform in test mode with setting any print parameters
    2.  Trigger print preview
    【Problem】
    1. I am getting only BAR's no barcodes.
    The bracodes are not displayed properly.
    If I test the same system barcode in SE73 it displayed properly.
    Is there anyother settings are necessory?
    Plz help me in solving the peoblem

    Hi
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Hope this link ll be useful..
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    Reward points for useful Answers
    Regards
    Anji

  • How to print Barcode using SAPscript?

    hello, everyone.
    I have some questions.
    now, I have to print some doc. that described by barcode in sapscript form.
    so, try to test in t-code so10
    input value SAPSCRIP-BARCODETEST, ST, EN.
    and click 'print-preview'
    result is correctly output in pint privew.
    but when I print dis priviewed doc. disappeared barcode image.
    is this O.K??
    I have to do something?? (Add DLL file, barcode font or etc....)
    I don't know how to print barcode using SAPScript. anybody solve this problem.please.
    p.s this system is SAP ECC 6.0 only ABAP.
    printer setting is front-end print.

    hello, everyone.
    I have some questions.
    now, I have to print some doc. that described by barcode in sapscript form.
    so, try to test in t-code so10
    input value SAPSCRIP-BARCODETEST, ST, EN.
    and click 'print-preview'
    result is correctly output in pint privew.
    but when I print dis priviewed doc. disappeared barcode image.
    is this O.K??
    I have to do something?? (Add DLL file, barcode font or etc....)
    I don't know how to print barcode using SAPScript. anybody solve this problem.please.
    p.s this system is SAP ECC 6.0 only ABAP.
    printer setting is front-end print.

  • Printing Barcodes using ABAP

    Hi Abapers,
       I Want to Print Barcode using ABAP Write statement. Is it Possible?
       Please suggest me.
    Thanks,
    Kishore

    Printing Barcodes with ABAP or SAPSCRIPT
    hope u will get some idea.
    We are now ready to print barcodes using an ABAP report program or a SAPSCRIPT form. In these examples we are using Code 39 barcodes which require very little formatting (all we have to do is add asterisks before and after the data).
    Sample ABAP Program:
    DATA: BAR_CODE1(16) VALUE `ABC01230123A01'
    NEW-PAGE PRINT ON IMMEDIATELY `X'.
    FORMAT COLOR OFF INTENSIFIED OFF.
    If the barcode is the first element on the page, the following Write
    statement is needed (otherwise you get a date in the first print
    control.
    WRITE:/
    Turn on the barcode font, print the data, and switch back to the
    printer's default font. Be sure to use NO-GAP to avoid unwanted
    characters or CR/LF.
    PRINT-CONTROL FUNCTION `BCPFX'
    WRITE: BAR_CODE1 NO-GAP
    PRINT-CONTROL FUNCTION `BCSFX'
    Add a Write statement to prevent insertion of CR/LF into the barcode.
    WRITE:/

  • Printing barcode in oracle report 6i in character mode

    Hi there,
    I am new in oracle reports, especially in printing it in character mode.
    I am trying to create a report for ticketing purposes, so I have to put barcode on it.
    So far, I did follow this link Printing in character mode (urgent)
    and yes, I didn't get it. I been doing this 3 days already and no successful result.
    I just don't get the commands in .prt file and how could i integrate it in oracle report 6i.
    The printer I use : epson LX-300+
    windows OS.
    Your help is highly needed, any opinion will do. I just need help that bad.
    Thanks..
    Edited by: shynn on Jul 18, 2012 6:56 PM

    Hi guys,
    I already get the character mode using ESC character.
    Just this, I need your help.. Do you know the ESC code for the barcode that we could add in .prt file?
    Just the ESC code, but if there is needed for configuration for that, kindly add it up.
    Thanks,

  • How to Print BARCODE in oracle RDF report

    Hi,
    We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.
    Thanks & Regards,
    Suresh

    897745 wrote:
    Hi,
    We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.It's very easy. Download a font which show barcode then choose your desire field's font that font. I use IDAutomationHC39M font.
    Hope this will help you.

  • Printing Barcode using DI API

    Hello Gurus,
    I want to create an Addon which can print a barcode using UI and DI API.  Can this be possible?  I will not use the Print Layout design.  Please help..

    Hi Gilbert,
    You can send the XML through a middleware application like Loftware to most printer types.  More info avail. at www.loftware.com or e-mail me [email protected]
    Thanks,
    Joel

  • Any Alternate to use  ORACLE GRAPHIC BUILDER   through Reports

    Hello ,
    After long research some option of creating complex graphs does not serve my problem like BI GRAPHS . I want to create graph in such a way that for example I have one view in which trainno, station no, scheduled time and departure time are stored. I want to display a line graph for same train schedul and depart wise. Now I try to create line graph in oracle 10g, there only one single line is displayed for two groups scheduled time and departure time and that also not sorting properly.
    In previous of oracle , Graphic builder had good option of creating field templates like line and attaching to line chart. So it there are two groups (Sched and departure time) , than line with different colour use to display separately for both. Now I don't find any way in oracle 10g to plot such type of Graph.
    If anybody has option or way than please give suggestion.
    Regards,
    Prashant

    I am not an expert on chart builder, so I don't know how you would access the model and get at the image files.
    However, if you have a URL that points to an image generated by the chart builder, you can use the <image> element to display it.
    It sounds like to produce these image files, you need to write some application logic. The correct place to put this application logic is probably in a subclass of a struts DataAction.

  • Printing barcodes through oracle applications

    Dear Schavali and all others,
    We are analyzing to setup a barcode printing through Oracle applications. I have seen your thread in this forums but now i cant find it. But please i need a clarification from you.
    To print bar codes from Oracle applicaitons
    if we go for
    1). Printing using third party tool and print server, what all do we need to buy. (Like if i have 20 branches do i need to purchase 20 printers or do i add the normal printers to the print server)
    2). If i go for XML enabled printers to print Directly the barcodes, only one user can print on it at a time??.
    If multiple users should be able to print at the same time which one should i go for??
    Thanks
    Taher

    Hi,
    We are analyzing to setup a barcode printing through Oracle applications. I have seen your thread in this forums but now i cant find it. But please i need a clarification from you.Use the search to find such threads.
    Barcode
    http://forums.oracle.com/forums/search.jspa?threadID=&q=barcode&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    To print bar codes from Oracle applicaitons
    if we go for
    1). Printing using third party tool and print server, what all do we need to buy. (Like if i have 20 branches do i need to purchase 20 printers or do i add the normal printers to the print server)Normal printers should be OK (provided that those printers support barcode fonts) -- How to setup, map, and print custom reports with a barcode / MICR font [ID 551630.1]
    2). If i go for XML enabled printers to print Directly the barcodes, only one user can print on it at a time??.
    If multiple users should be able to print at the same time which one should i go for??Multiple users can print to the same printer.
    Thanks,
    Hussein

  • What is the best wide format printer to use for graphic design?

    Hello all, I recently upgraded to a new iMac and am looking for the most suitable colour tabloid or super tabloid printer. I am willing to pay as much as $3000 and have read excellent reviews of the Phaser 7500, but the size and weight are too much for me in my home office. I would also consider inkjet models but want something crisp and clear for graphic design and have heard there are problems with compatibility with Snow Leopard and Lion. Am now considering the OKI C830 series. Any experience with this or recommendations? Many thanks!

    Had 2 Phaser 7700's - excellent print quality - large footprint, overpriced and consumeables are expensive
    Currently have a Konica Minolta Magicolor 7450 - print quality close to the Phasers, large footprint, good price, consumables much cheaper than the Phasers - Noisy, not great in a small office.
    No FHE with the OKI but it looks like a nice machine. Best to find a dealer and check out print quality and if you have small space watch out for the fans humming it can get overwhelming intrusive.

  • How to print BARCODE in DATAMAX Printer using SAP Script?

    Hi,
    Can anybody guide me how to print BARCODE using DATAMAX Printer?
    I need to develop a SAP Script, through which i need to print the BARCODE.
    Pls. let me know the parameters for Script and how to print using print program.....
    Regards,
    Hemant

    make one form in sapscript with one main window: like this
    /E           ETIKETT
    /*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
    /           ~f350
    /           ~n
    /           ~M0500
    /           ~O0220
    /           ~SG
    /           ~s
    /           ~c0000
    /           ~e
    /           ^D
    /           ~L
    /           D11
    /           H20
    /           PC
    /           pC
    /           SC
    /           A2
    /           1911A1200400005&knmt-kdmat&
    /           1911A0800300005&knmt-postx&
    /           1911A0800100005VS-Nr   :         &KNMT-MATNR&
    /           1911A0800000005Datum   :         &date&
    /           Q0001
    /           E
    in this script   &mseg-matnr&    and    &mseg-charg&    are 2D Barcodes
    /E           ETIKETT
    /*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
    /           ~f350
    /           ~n
    /           ~M0500
    /           ~O0220
    /           ~SG
    /           ~s
    /           ~c0000
    /           ~e
    /           ^D
    /           ~L
    /           D11
    /           H20
    /           PC
    /           pC
    /           SC
    /           A2
    /           1Wc99000001400082000012012&mseg-matnr&
    /           ySPM
    /           1911A1000380055&mseg-matnr&
    /           1Wc99000001501702000012012&mseg-charg&
    /           1911A0800260055&mkpf-budat&
    /           1911A0800140055&mseg-mblnr&
    /           1911A0600020008&makt-maktx&
    /           Q0001
    /           E
    then you need your own printprogram and everything is fine. with open_form ;  start_form ; write_form;  end_form
    you can communicate direct with the Datamax Programming Language  from SAPScript to the Barcode printer.
    i also have the datamax programmers manual as pdf if you want i could send it to you. let me know by PM.
    also have look into HW 490295  the bartender Solution works fine for me to create the SO10 text's
    greetz
    tony
    Edited by: Tony Wienhold on Jul 17, 2009 4:37 PM

  • Printing barcodes on 10g server running on Solaris OS

    Hi,
    We are using Reports 10g (10.1.2) on Solaris Operating System (SPARC 32-bit).
    We wanted to print barcodes using Java bean method. It prints fine in windows, but giving below error when run on web using rwservlet. Actually we are using virtual display using xvfb.
    My question is: Do we need to have physical display by setting up another machine like in 6i ?
    Can we achieve the rendering of barcode image using virtual display ?
    What are the setup steps needs to be followed if rendering is possible with out using physical display ??
    Thanks somuch!!!
    The ERROR is:
    REP-108: MSG-00100: < No Exception Message >
    MSG-00100:
    java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:121)
    MSG-00100: java.awt.Window.<init>(Window.java:274)
    MSG-00100: java.awt.Frame.<init>(Frame.java:401)
    MSG-00100: java.awt.Frame.<init>(Frame.java:366)
    MSG-00100: oracle.apps.barcode.BarCodeMaker.renderBarCode(BarCodeMaker.java:84)
    MSG-00100: oracle.reports.engine.EngineImpl.CRunReport(Native Method)
    MSG-00100: oracle.reports.engine.EngineImpl.run(EngineImpl.java:437)
    MSG-00100:
    oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
    MSG-00100:
    com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
    MSG-00100: com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
    MSG-00100:
    com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81
    MSG-00100:
    com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:10
    6)
    REP-0108: File '/tmp/srw002114024' not found.

    Thanks Sooooomuch!!!!!!
    we are running Xvfb located at /usr/openwin/bin/
    In particular, we are starting the Xvfb server with the following command:
    nohup Xvfb :1 -screen 0 1600x1200x32 &
    We are then setting the DISPLAY on the command line and in the reports.sh
    script using: DISPLAY=10.25.3.123:0.0; export DISPLAY
    We verify that it recognizes the display using "xset -q"
    In reports.sh file We entered below line:
    ## REPORTS_DEFAULT_DISPLAY=NO; export REPORTS_DEFAULT_DISPLAY
    DISPLAY=10.25.3.123:0.0; export DISPLAY
    But still we are getting java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:121)
    MSG-00100: java.awt.Window.<init>(Window.java:274) Errors.
    Is there anything wrong in the above setup ?
    Please advice.
    Thanks Soomuch,
    Ram.

  • Is there any way to generate Gantt chart by using oracle 9iDS?

    Is there any way to generate Gantt chart by using oracle 9i reports builder
    Can you please send me the link or more information on oracle 9iDS.
    Thanks

    Hi,
    Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
    Frank

  • Changing legend labels in Oracle Graphics 6

    Hello,
    i am currently using Oracle Graphics to create barcharts for my reports. My problem is, that i want to change the label used for the shown bars via a parameter. Changing the labels of the X- and Y- axis is no problem with PL/SQL but it seems that the only way to change the legend labels is by using "AS" in the query (e.g. select a_column as LABEL from ...). I really need to change it by parameter.
    thx for any help.

    Post Author: jsanzone
    CA Forum: Publishing
    Nym,
    The only way that I've been able to control the name of a label in regards to graphing is to use the Variable Editor and create a variable off of the column, for instance:
    The name of the column from the database is call "Black_Catalog". so I create a variable called "The Black Catalog" and in the formula: =&#91;Black_Catalog&#93;
    Then in the graph I replace the field that is called =&#91;Black_Catalog&#93; with my new field.  When the legen displays it will show "The Black Catalog".

  • Sapscript print barcode problem.

    hi everyone . i have troble about printing barcode using sapscript.
    now i have program sapscript program name is "ZRABARC01"
    and this program call sapscript = "ZAA_BARCODE"  (you will see  code at below of this message)
    this program work well.
    i want to create new programm "ZRABARC01_TEST"
    (i use se38 for copy program from ZRABARC01)
    and this new program will call sapscipt "ZAA_BARCODE_TEST"
    (i use se71 to copy from ZAA_BARCODE) 
    sapscript is active
    the problem is when i execute program ZRABARC01_TEST to call sapscript ZAA_BARCODE_TEST
    it's will show button print barcode
    after press button . it's will show print preview button.
    when i press print preview button .
    it's show error like this.
    error message
    There is no valid form
    Message no. AB 061
    Diagnosis
    During the printing of barcodes,
    the system could not find a valid form. Either no form was selected,
    or the form selected is not active.
    System Response
    The print procedure terminates.
    Procedure
    Use a valid form. You can either use the sample supplied by SAP,
    or modify it to your requirements. You maintain forms using the "form painter" (SE71) transaction.
    and after that i press print button again.
    there is error
    ABAP runtime errors    LOOP_WITHIN_LOOP
    what should i do to use program ZRABARC01_test call sapscript ZAA_BARCODE_test
    and i wonder why when i use program ZRABARC01_test and call sapscript
    ZAA_BARCODE  it's show same error.
    please help me.
    program code
    pa_form = 'ZAA_BARCODE'
    LOOP.
        AT FIRST.
         Formular ๖ffnen
          CALL FUNCTION 'FIAA_BARCODE_OPEN'
               EXPORTING
                    i_form = pa_form.
        ENDAT.
      Zurckholen der Struktur ANLAV.
        anlav = anlav_str.
    Insert 03/11/2004 OaK
        WRITE anlav-anln1 TO t-anln1 NO-ZERO.
        l1 = strlen( t-anln1 ).
        CASE l1.
          WHEN '1'.
            CONCATENATE '000000000000' t-anln1 INTO t-anln1.
          WHEN '2'.
            CONCATENATE '00000000000'  t-anln1 INTO t-anln1.
          WHEN '3'.
            CONCATENATE '0000000000'   t-anln1 INTO t-anln1.
          WHEN '4'.
            CONCATENATE '000000000'    t-anln1 INTO t-anln1.
          WHEN '5'.
            CONCATENATE '00000000'     t-anln1 INTO t-anln1.
          WHEN '6'.
            CONCATENATE '0000000'      t-anln1 INTO t-anln1.
          WHEN '7'.
            CONCATENATE '000000'       t-anln1 INTO t-anln1.
          WHEN '8'.
            CONCATENATE '00000'        t-anln1 INTO t-anln1.
          WHEN '9'.
            CONCATENATE '0000'         t-anln1 INTO t-anln1.
          WHEN '10'.
            CONCATENATE '000'          t-anln1 INTO t-anln1.
          WHEN '11'.
            CONCATENATE '00'           t-anln1 INTO t-anln1.
          WHEN '12'.
            CONCATENATE '0'            t-anln1 INTO t-anln1.
        ENDCASE.
    *End of insert 03/11/2004 OaK
    *Insert for Barcode printing 26/01/04
       UNPACK anlav-anln1 TO t-anln1.
        IF anlav-anln1+0(2) = '00'.
          MOVE anlav-anln21(3) TO t-anln10(3).
        ENDIF.
        APPEND t.
    *End of insert.
        CALL FUNCTION 'Z_AA_BARCODE_PRINT'
             EXPORTING
                  i_anlav = anlav
                  i_form  = pa_form
             TABLES
                  i_t     = t.
        CALL FUNCTION 'END_FORM'.
        CALL FUNCTION 'START_FORM'
             EXPORTING
                  form   = pa_form
             EXCEPTIONS
                  OTHERS = 8.
        AT LAST .
         Formular schliessen
          CALL FUNCTION 'FIAA_BARCODE_CLOSE'
               EXPORTING
                    i_form = pa_form.
        ENDAT.
      ENDLOOP.
    ENDFORM.
    Edited by: dittaporn nanasilp on Nov 17, 2009 11:55 AM

    hi,
    I am unable to read your post, check it once.
    rgds

Maybe you are looking for