Printing Basics Question

I'm trying to figure out the basics of printing in SGD and was hoping someone could shed a bit more light on it for me.
First off, I have printing working. I have Windows 2003 App Servers, fronted by a SGD on Solaris 10 and Solaris 10 clients using web browser access to SGD. My problem lies in the fact that each Solaris client may have a different make and model of printer attached to it. The SGD host is shared between all clients and therefore has a shared printer configuration between users and hosts.
When a user logs into a given host and starts a Windows desktop they see the _Default printer defined as the default printer type (the QMS 1060 Print System) so when they try to print they get none of the advanced features of the printer such as color or duplexing.
I'm trying to figure out a way so that, when a user logs into a particular client (they will use different clients all the time) they will see only the printers attached to that client with those printers drivers properly configured. Is there a way to do this?

Hi.
By default (as dictated by the /opt/tarantella/etc/data/default.printerinfo.txt file), the UNIX/Linux clients get a predefined "QMS 1060 Print System" when conencting to Windows app servers; this is because the SSGD client is not able to find out the exact brand/model of the printer being used on the UNIX/Linux client side.
If the SSGD client is operating under a Windows environment, then the client is able to pick up the correct driver as to create an equivalent printer on the server side (assuming the server does have the required driver).
Back to UNIX/Linux clients: by amending the above file (or by copying the same file under $HOME/.tarantella/printerinfo.txt) you can instruct SSGD at to configure printers on the Windows server accordingly; as an example (taken from the SSGD 4.41 admin guide - see references below) if you put the following lines into the $HOME/.tarantella/printerinfo.txt file (on the CLIENT, NOT on the SSGD server):
[UNIX]
"drafts" = "HP DeskJet 970Cxi" PCL
"salesprinter" = "HP LaserJet 5/5M" PostScript
when SSGD connects to the Windows server, the user will then see a couple of printers available:
drafts/SSGD_SERVERNAME/SESSION_NUMBER
salesprinter/SSGD_SERVERNAME/SESSION_NUMBER
Please notice that SSGD_SERVERNAME and SESSION_NUMBER are actually placeholders for the name of the SSGD server and the number of RDP session calculated by the Windows server.
Of course, you'll have to make sure drivers for both "HP Desktop 970 Cxi" and "HP Laserjet 5/5M" are available on the Windows server (you don't have to create the above printers first, only make sure the drivers are available).
You'll notice the PCL and PostScript entries and the end of the above lines; they're used to inform SSGD of the "type" of the printer (ie, which language the printer supports) so that the tta_print_converter can eventually "convert" among different print types (eg, from PostScript to PDF, from text to Postscript and son on).
You'll find more info on this subject in the SSGD admin guide: http://docs.sun.com/app/docs/doc/820-4907
Hope this helps.
Ciao,
Rob

Similar Messages

Basic Questions - capturing miniDV, exporting to DVD?

I apologize for the basic questions, but it's been a while since I've done this start to finish...like five years.
I shot a bunch of miniDV sports footage on a Canon GL2 and I am digitizing the footage via firewire (straight from my camera to my computer). I am using Final Cut HD. The output will be to DVD.
The Easy Setup is set to DV-NTSC. The sequence and capture settings are both set to DV-NTSC 48kHz.
1. Under system settings > playback control > What are the correct settins for "RT", "video quality" and "pulldown pattern"? Do these ultimately affect the output quality?
2. What is the "best" way to output to DVD (using the least compression, looking the best)? The end product will be about 35 minutes long. Should I output to QT and burn in DVD studio Pro, or "print to video" using an external DVD burner via a Sony converter box (how I used to export to VHS)?
Thanks for pointing me in the right direction! I'm rather desperate...

Depending upon whether you mean desperate in terms of time required to deliver the project or just for a solution, you can quickly output to DVD using iDVD as follows.
If the FCP project resides on the same computer as iDVD (or a connected FW drive), simply 'export' - 'quicktime movie' (uncheck the 'make movie self-contained' checkbox and use 'current settings')
Open iDVD and drag the resultant quicktime file into one of the themes you have chosen. (In the iDVD preferences set to NTSC and as the project is less than 60 mins you can use 'best quality' or 'best performance'. (There is no option to compress audio in idVD)
The iDVD interface is pretty straight forward to negotiate.
You will have more control over the output quality using DVDSP, but the learning curve is a little steeper than iDVD, however the DVDSP tutorial manual is very good for a quick start - you have 2 options in DVDSP, either use compressor to compress audio and video before authoring the disc in DVDSP or drag the afore mentioned quicktime file into the assets pane of DVDSP and let DVDSP do the compression.
(I'm not an expert, but I believe this method doesn't give you the option to compress the audio - compressing the audio is one way of giving you more latitude in giving the video better quality)
So I reckon that to get the best results you ought to compress using compressor before bringing into DVDSP.
This thread is very useful as a basic Compressor tutorial.
http://discussions.apple.com/thread.jspa?messageID=3621676&#3621676
Along with the DVDSP tutorial manual, I authored and outputted a 60 min DVD with 2 menus and chapters, using Compressor and the DVDSP templates having had no prior experience at all with either Compressor or DVDSP in less than a day and I'm not particularly competent, so I know these 2 resources are user friendly.
Good luck,
Dave

Font, Logo, Basic Questions

Hello:
I have a few basic questions that I'm hopeful one or more of you experienced Illustrators can help me with. I am slowly working my way through Lynda.com tutorials re: Illustrator and I think my question exceeds my tutorial progress ... Here is my scenario:
I'm creating a business card;
The logo for the business card is simply the letter "M," old English style (this is the exact "M" I need -- http://www.fontspace.com/dieter-steffmann/anglicantext?text=M&fontsize=80&foreground=00000 0&background=FFFFFF);
I have found the style of "M" I need on fontspace.com (by the way, if I found the "M' that I need elsewhere I have no aversion to paying for it. This font stuff is tricky and I'd rather pay than lose time with the wrong stuff) (I don't know anything about fontspace, just that it has the "M" I need);
The fontspace "M" is a True Type font.
Now, what I need is to get the "M" into illustrator because the printing company (moo business cards) needs my design in vector form.
Am I thinking correctly that downloading the font, installing it (OSX), I can then get into Illustrator as a vector image?
Or am I totally off base?
Again, thanks for the benefit of your experience.

You are welcome, Mobius.
The last sentence might as well, or better, be:
A logo only consisting of an existing font letter may be less than expectable.
That said, there is nothing wrong with freeware fonts, but a certain proportion of them are unusable when you work with Illy, who is more particular than most.
The proof of the pudding is the eating. So if you download the font and it works, then it works.
I believe there are many fine font download sites.

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

Pl/sql vs sql basic question

Hi,
I have a very very basic question, so excuse me for that... I just would like to know the difference ( and the difference in usage) between sql and pl/sql?
thank you
Yann

SQL - the structured query language - is the language available for extracting data from the database. It is a 4GL, and each command stands alone and performs a database action.
PL/SQL is the 3GL primarily intended to control the flow of a series of SQL commands. PL/SQL does not, in any way, interact with the data in the database. It does, however, allow SQL statements to be called, or even created, in a specific order.
SQL is capable of a LOT more than people usually realize. Unfortunate, as people often create PL/SQL programs when single SQL statements will do the job. I encourage reading the O'Reilly 'Mastering Oracle SQL' book ... only after fiunishing that book do I recommend any of Feuerstein's excellent PL/SQL books.

Basic questions on data modeling

Hi experts,
I have some basic questions regarding data modeling within MDM. I understand the available table types and the concept of lookup fields. I know that the MDM data modeling concept is different to the relational concept. But having a strong database background my first step was to design a relational data model which I would like to transfer to a MDM repository. Unfortunately I didn't found good information material on this. So here are some questions maybe you can help me:
1) Is it the right approach to model n:m relationships with multivalued lookup fields? E.g. main table Users with lookup field from subtable SapAccounts (a user can have accounts in different SAP systems, that means more than one account).
2) Has a record always be unique in MDM repositories (e.g. should we use Auto ID's in every table or do we have to mark a combination of fields as unique)? Is a composite key of 2 or more fields represented with marking these fields as unique?
3) The concept of relationships in MDM is only based on relationships between single records (not valid for all records in a table)? Is it necessary to define all relationships similar to the relational data model in MDM? Is there something similar to referential integrity in MDM?
4) Is it possible to change the main table to a sub table later on if we realize that it has also to be used as a lookup table for another table (when extending the data model) or do we have to create a new repository from scratch?
Thank you for your answers.
Regards, bd

Yes you are correct. It is almost difficult to map relational database to mdm one. But again MDM is not 'just' a database. It holds much more 'master' information as compared to any relational db.
1) Is it the right approach to model n:m relationships with multivalued lookup fields? E.g. main table Users with lookup field from subtable SapAccounts (a user can have accounts in different SAP systems, that means more than one account).
Yes Here you need to use MV look up tables or can also try Qualifier tables if it gets more complex
2) Has a record always be unique in MDM repositories (e.g. should we use Auto ID's in every table or do we have to mark a combination of fields as unique)? Is a composite key of 2 or more fields represented with marking these fields as unique?
Concept of uniqueness differs here that you also have something called Display Fields (DF). A combination of DF can also be treated as Unique one. For instance while importing records if you select these DF as a combination, you will eliminate any possible of duplicates based on this combination. Auto Id is one of the ways to have a unique id once record is within MDM. While you use UF or DF to eliminate any possible duplicates at import level
3) The concept of relationships in MDM is only based on relationships between single records (not valid for all records in a table)? Is it necessary to define all relationships similar to the relational data model in MDM? Is there something similar to referential integrity in MDM?
Hmm... good one. Referencial Integrity. What I assume you are talking is that if you have relationships between tables then removing a record will not be possible as it is a foreign key for some record. Here MDM does not allow that. As Relationships within MDM are physical and not conceptual. For instance material can have components. Now if material does not exist then any relationship to components is not worthwile to maintain. Hence relationshsip is eliminated. While in relational model relationships are more conceptual. Hence with MDM usage of lookups and main table you do not need to maintain these kind of relationships on your own.
4) Is it possible to change the main table to a sub table later on if we realize that it has also to be used as a lookup table for another table (when extending the data model) or do we have to create a new repository from scratch?
No. It is not possible to convert main table. There is only one main table and it cannot be changed.
I went for the same option but it did not work. What I suggest is to look up your legacy system one by one and see what fields in general can be classified as Master, Reference, Transactional - You will start getting answers immediately.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

HT1311 I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

http://support.apple.com/kb/HE36
Regards.

HT1848 Forgive such a basic question, it's easier than looking it up. I have my iTunes music on macbook pro and have only synced it to one iPod. I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no ch

Forgive such a basic question, it's easier than looking it up. I have my iTunes music on macbook pro and have only synced it to one iPod. I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no charge?

will I be able to sync my music from computer to new iPod at no charge?
Yes, you will.

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question

If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question. Trying to hold out as long as I can, but purchasing an iPhone for Christmas and new iMac next year when warrently expires.

Thank U very much for the quick reply, I wanted to upgrade this weekend, but still on the fence. I can live with the software that is not compatible, they are on another compuetr, just didn't want the obvious stuff to stop working.

Basic questions about Infocube

Hi, everyone.
I got very basic questions about infocube data handling.
With infopackage, I extracted all the data about employees from R/3.
But there were some mistakes during inputting employee data, like positions,
so I just extracted those employees data once more.
Now I have two requests in infocube, where the first one has some wrong data.
Is there any solutions about this?
I might got it all wrong, so as beginner, any suggestions and explanations will
be grateful.

Hi,
You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
Other option is to make setting in the Infopackage to delete similar or overlapping request.
Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or More Comprehensive "
Assign points if useful
Regards
Venkata Devaraj !!!

Basic Questions

Hi all,
I´ve some basic questions - we are seeking for an alternative for our MS Exchange System. So I need some more information before going to hot testing Oracle :-)
- Does Oracle Coll. support multiple Domains? Not only subdomains - either completley different Domains?
- Is it possible to create multiple Users via SQL (Massgeneration)?
A more technical question:
On my first testing (Solaris 10, Sparc) I run into a strange phaenomen - my FQDN hast an '-' interated and the installation process interpreted it as '_'? I mean I have read something about that but couldn´t find that in the doc. anymore. I think it is a big problem for sending mails if the system change my domain name from [email protected] to mail@fq_dn.com ... ;-)
Is it my fault or is it a "feature"?

Hi Eisfalke!
Oracle Collaboration Suite supports multiple domains.
You will not create users with SQL but with some other commandline tools as their data goes into the OID and the CS database. But yes, it has tools for bulkcreation.
I have not yet had the pleasure of working with a domain with a - but you should be capable of creating a new domain with a dash and remove the domain with the underscore.
cu
Andreas

Basic Questions About Compiling Source

Hi!
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
Maybe it's that 'setup.py' file? What are you supposed to do?
Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
OS 10.6.8
Xcode 3.2.4
Python 2.7

sudont wrote:
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
The make file will figure that stuff out.
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

Basic questions about macbook pro + external monitor

Hi,
I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
So, here they are:
1) Can I use the external display as the main display?
2) Will the external display run with its resolution or with that of the mbook pro?
3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
4) Is it dangerous to keep the mbook closed while using the external display?
5) Does the usage of the external display impact on mbook performance?
I know...a lot of questions , but would be nice if someone could help me.
Thanks.

Hi - I am presently using an external display.
To answer your questions in sequence:
1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
5. I have not seen any performance degradation whatsoever.
Hope this helps.

Printing Basics Question

Similar Messages

Maybe you are looking for