Printing Blank pages for SSRS Reports in Firefox browser

I have created an SSRS Report that works well on chrome, but when I use the site in Firefox the SSRS Page prints blank pages though the report displays properly. I have tried every thing like reducing table width. I am using the report viewer control.
Sanjeev Menon

Hi Sanjeev,
Generally, if the report display properly in the browser, it should be also work well when we print the report. And I can’t reproduce the scenario in my own environment. As to this issue, I recommend that you can try to run it in compatibility mode or use
IE explorer to print the report.
If this issue still exists, please try to update the report viewer control to latest release and check this issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Printing blank pages for entire document

I can see the PDF from within the browser or in Adobe Reader. It also shows in the thumbnail in the print dialog box. But, it prints black pages for each page of any of my documents. From within the web browser (Firefox 3.02 or IE 7), print preview shows it as blank also. I can print form other applications. This is using Adobe 9.0 on Windows Vista. Version 8.0 also stopped working recently, so I upgraded to version 9 to try and fix this issue.

Hi Sanjeev,
Generally, if the report display properly in the browser, it should be also work well when we print the report. And I can’t reproduce the scenario in my own environment. As to this issue, I recommend that you can try to run it in compatibility mode or use
IE explorer to print the report.
If this issue still exists, please try to update the report viewer control to latest release and check this issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Printing blank pages in a report

Post Author: DavidH
CA Forum: General
We have a report that needs to throw a blank page for when a group changes. We got that and then needed to throw a page so that one group did not print on the reverse of another.
This works on our printer but when we put the same report on the clients printer they get a completely blank sheet of paper between each group.
I understand that Crystal 8.5 had an issue with reports being printed on different printers and wondered whether this is still the case.
We are using 9.0
Thanks David

Post Author: sleahcim
CA Forum: General
Hi David,
This article may be of some help: http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do;jsessionid=04EC563D5B1F5D551720C2FC8CD9242D?cmd=displayKC&docType=kc&externalId=c2005478&sliceId=&dialogID=14598434&stateId=1%200%2014600426
-Michael

PRINTING BLANK PAGE IN ORACLE REPORTS 6I

I am Printing statement on a double-sided stationary capable printer. To ensure that each new statement starts on a new physical paper, I need to add a blank page if the previous statement had an odd number of page size. How can I do that. Please Help.

First, thanks for your response, but ...
(1) I use this sentence in BeforeReport Trigger
srw.run_report('report=ANA13F blankpages=no');
and gives me the following error 'REP-1429:'beforereport':SRW.RUN_REPORT no puede ser llamado con lote=no' then I add a new parameter
srw.run_report('report=ANA13F batch=yes blankpages=no');
and then I get the following error 'REP-1428:'beforereport':Error al ejecutar SRW.RUN_REPORT'
(2) In this case it doesn´t work because I set the global variable in a format trigger for frame M_1, which is inside panel 2 (1 vertical panel x 2 horizontal panels per page). With this value I try to hide Image_1 and Field_1 that are in the margin for the same panel. The first time it has to hide these objects it works for M_1 because of return(false) in the trigger and set the variable to NO, so the next pages appear blank as I want, but the in the first one only hides M_1, not Image_1 or Field_1. It seems I have to put the var in other place, but I don´t know where because it refers a field in M_1.
Well, I don´t want to bother you, help as you can.
Thanks anyway.

Blank page for PDF Report

I have a XML report with header and footer and repeatable details. When the number of the detail transactions just fit in one page, a blank page will be printed as the last page.
In the first field pf the detail line I have the xml code as
<?for-each:G_LINE?><?sort:ITEM_CODE;'ascending';data-type='text'?><?sort:LOT_NUMBER;'ascending';data-type='text'?>
In the last field of the detail line
<?end for-each?>
Does anyone know how to suppress the blank page? Thanks in advance.
Regards
Lawrence

Simple check :
1) Check your rtf template, if that has extra carriage return after last code line.
If your last code line is <?end for-each?> then check carriage return.
2) If your RTF template has empty page.

Customized about:blank pages (for use with stylish firefox extension)

i just made a couple of new archlinux about:blank pages and i thought i would share
1 .
http://userstyles.org/styles/14090
Last edited by tjwoosta (2009-01-24 23:18:52)

2. http://omploader.org/vMTY0dg
http://www.filefactory.com/file/a038c8a … larger.txt

How to not print a page of a report under a condition

Hi,
I need to build a report with a specific layoutdepending on a user paramater.
Ex:
If parameter value is 1, then display the layout of the first page of the report
If parameter value is p_layout2, then display the layout of the second page of the report
If parameter value is p_layout3, then display the layout of the third page of the report
If parameter value is p_layout4, then display the layout of the fourth page of the report
So I built a report, putting on page 1 the first layout, page 2 the second etc.
I put each layout into a frame, with FormatTrigger as of: IF :paramater IS 'p_layoutx' THEN TRUE ELSE FALSE.
The output prints only the frame needed (the one attached to the value passed by the parameter) BUT prints blank pages for all others (the 3 remaining ones).
So, how would I do to make the report NOT to print these blank pages, having only one page printing, the one that matches the condition?
Thank you in advance.

I found a way to achieve my goal: Instead of creating a frame with formattrigger for each of my layouts and inserting in it all my objects (text fields and graphics), I don't create any frame, put all my objects on the desired pages and put the formattrigger conditions on these objects with vertical elasticity for all of them. When not the condition is not met, then all objects are shrinked. It is weird that the behavior is not the same with a frame (the frame with vertical elasticity should "shrink" itself; or maybe I missed something).

New foxfire. now printer prints blank pages

recent firefox update. Now cannon printer only prints blank pages for e-mail files.

Simple start would be to see if you can print in another browser like Internet Explorer or Google Chrome, then we can identify that it is the Firefox update that caused this issue

Printer prints blank pages when I turn it on

When I turn my printer on it starts to endlessly print blank pages for no reason. I have checked the print log and there isn't anything waiting to be printed. I have reset the printer, unplugged the power supply, and reset my computer. None of this worked. I have a HP PSC 1410 All-in-one.

Have you tried disconnecting the printer from the computer?
1. Power off the printer.
2. Disconnect the USB cable from the back of the printer.
3. Power on the printer.
Does it still print continously?
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Windows Machine Prints Blank Pages

Purchased the new Airport Extreme n this week. I was able to get the wireless working with my iMac and Windows XP laptop, however I am having printing issues.
I have a Canon 4200 hooked up to the Extreme via a USB hub. I was able to get the XP machine to see the printer, but when I print, it prints blank pages. I can tell that it recognizes the document because it prints blank pages for however many pages are in my document. I went through the iFelix steps but get the same result.
I searched through the forum (in addition to other independent mac forums), but most people's issues are with the Extreme simply recognizing the printer.
Please help!
Airport Extreme N

Can't see the channel would make any difference, although specifying a channel might be better than letting it wander.
There won't be any printer settings in the extreme settings (didn't realise that was what you were after) they will be in the printer utility on your mac. Again you have probably done it but your printer should be set up as a network device not a s a USB device. Sorry I can't be of any more help at the moment.
It might encourage you to know that I had my printer working just fine, I changed some setting just as a trial and it started printing full pages of yellow, I changed the setting back and it was OK again. Only thing is I don't remember what setting I changed.
Have you tried WEP instead of WPA. and have you tried restarting (not resetting) all your devices.
Got to go to bed, 5am here, hope someone else picks up this thread with you, there are a lot of good people here.

REPORT SERVER 6i Patch1 PRINTING BLANK PAGES

I have a problem that is occouring on three different report servers. It will start printing blank pages instead of the report and the only way to get it back to normal is to stop and reastart the service. I get this on a version 6, version 6i and version 6i patch1 report servers. It makes no difference what call method I use (command line or OCX control). I can also force this behavior on one of the servers by selecting a HP 895C as the default printer in the windows printers and then starting the service. All pages print blank after that. At the customers site it appears to be random as to when it will start printing the blank pages.
Any ideas on what the fix is for this?
null

Is there any ideas on this?
We have a Reports 6i server up and running and I'm getting stuff out OK to postscript printers, but some HP older printers are just spitting out blank pages. Is there a desformat= that I need to set differently? I've tried most of the options ( dec, psport, psland, hpl... all blank )
Appreciate any help, I haven't used this stuff long, so am quite naive about how it hangs together.
null

Firefox 17 on Windows 7 prints blank pages after printing selection

I need to be able to highlight text on a webpage and print only that text using the print selection inside the file/print tab. However, instead, I am getting only that highlighted text AND then blank pages (with headers and footers) keep printing (how many pages that print depends on the actual size of the webpage).
I have Windows 7, 32bit and Firefox 17. I updated Firefox this morning and restarted but the problem still exists. I did not have this problem when I had Windows XP.
The print selection works properly in IE9.

Firefox's Print Selection feature has always left much to be desired...
What I get is blank pages ''before'' the selection but not after. You get blank pages for the entire document? That's especially unhelpful.
I am aware of two ''workarounds''. Each isolates the selection by itself so you can print it normally, i.e., without choosing Print Selection.
'''[https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced]'''
After installing this add-on, when you have a selection and right-click it, you can choose "Remove everything else" to isolate the text for printing. Note that you need to reload the page to see the rest of the content again.
'''Bookmarklet'''
Before learning about the above, I wrote a small script to isolate the selection for printing. I wouldn't use it if you are filling in a form, making a purchase, etc., since the script duplicates part of the page and this may break the form. On the other hand, at least there is some level of undo without reloading the page.
If you want to try it, here are the steps:
(1) Select and copy the following line of script (it's all one long line):
javascript:var sel=window.getSelection(); if(!sel.isCollapsed){var rng=sel.getRangeAt(0); if(!rng.collapsed){var docfrag=rng.cloneContents(); if(!document.getElementById("divHideMe")){var rng2=document.createRange(); rng2.selectNodeContents(document.body); var myContainer=document.createElement("DIV"); rng2.surroundContents(myContainer); myContainer.setAttribute("id","divHideMe"); rng2.detach();} myContainer.style.display="none"; if(document.getElementById("printFrag")){var myFrag=document.getElementById("printFrag"); while(myFrag.firstChild) {myFrag.removeChild(myFrag.firstChild);} myFrag.style.display="block";}else{var myFrag=document.createElement("DIV"); myFrag.setAttribute("id","printFrag"); document.body.appendChild(myFrag);} myFrag.appendChild(docfrag); rng.detach(); var myP=document.createElement("P"); myFrag.appendChild(myP); myP.setAttribute("id","killBtn"); var myBtn=document.createElement("INPUT"); myP.appendChild(myBtn); myBtn.setAttribute("type","button"); myBtn.setAttribute("value","Return to Page"); myBtn.setAttribute("onclick","document.getElementById('divHideMe').style.display='block'; document.getElementById('printFrag').style.display='none';"); myStyle=document.createElement("STYLE"); myFrag.appendChild(myStyle); myStyle.setAttribute("type","text/css"); myStyle.setAttribute("media","print"); myStyle.innerHTML="#killBtn{display:none}";}} void 0;
(2) Right-click the Bookmarks Toolbar and choose New Bookmark. (If you do not ordinarily display the Bookmarks Toolbar, you can add it to the menu instead. Whatever will be convenient.)
(3) Click in Location and paste the script.
(4) Click in Name and name it whatever you like (I call it Crop4Print) and then click Add.
Now after selecting text, click the bookmarklet button to hide the rest of the page.

Firefox will show PDF's but prints blank pages. Other browsers are fine, safe mode has no effect.

Currently on an HP laptop, Win8, printing to a HP Color Laser, no previous problems; all of a sudden, PDF's are printing blank pages. I can see the page fine. Safe mode without any addons has no change. I printed my taxes out and had no problems.
I've used IE (shudder) an been able to print PDF's fine. I have no PDF software itself on the computer, just using the browsers native support. EXTREMELY FRUSTRATING. Searching shows problems loading PDF's, but my problem is printing PDF's. Using version 29 of Firefox. Anyone got any tips or clues how to hunt this down? Really close to introducing my computer to Mr. sledgehammer.

Thanks, appreciate the links for PDF driver add ons, this will be my last resort if nobody else can figure it out. I don't use Acrobat because of all their bloatware and hidden installs. I still would like to know why Firefox started printing blank pages in PDF's, but can still open the PDF's, very frustrating. Seems like a few other people are having the issue as well.

My Brother MFC-J615W prints blank pages from Firefox 3.6.18

The printer works fine with other programs, prints blank pages form Firefox.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
Make sure you reset all the prefs for that printer.

Firefox prints blank pages

I got the new update to 29 a few days ago, and since then I cannot print from Firefox. It is my main use browser for Ebay, Amazon, and Etsy, and I have had to use IE since the update, as the labels I print appear fine in the preview, but print blanks.
I have tried resetting Firefox, I have gone into about:config and reset the print_printer files, and I have tried in safe mode. Nothing works. I have rebooted after trying each step, and still nothing. I hate to have to go to chrome or IE, Firefox suited my needs the best, but Im lost for now...

hello ceeleone, unfortunately this is currently a bug in the integrated firefox pdf viewer that is getting addressed by our developers. a firefox 29.0.1 release without this issue should be available within a matter of days.
<br>in the meantime you could use a third-party pdf plugin like from adobe that you can enable in the firefox ''options > applications'' - scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

Printing Blank pages for SSRS Reports in Firefox browser

Similar Messages

Maybe you are looking for