Printing blank pages from Windows

I used Bonjour successfully to set up a PC on my network to print via the USB attached to my Airport Express. Now, however, all I get is a blank sheet of paper fed through the printer when I attempt to print from the PC. Coincidentally, I installed Parallels Desktop for Windows and used Bonjour to set up the printer--apparently successfully. Again, though, all I get is one or two blank pages. Obviously both the PC and Parallels are communicating with the printer but I cannot discover why they are not printing. The three Macs on my network all print without problem to the same HP psc 2510. Any help would be appreciated.

Try install all updates for Windows and check for update for latest version of your printer's software.
Try run a test print and check if it works.
Also check the cartridge and make sure they are okay.
You may contact Canon's support too. 

Similar Messages

  • My printer prints blank pages from my documents but prints pages from e-mail fine

    My HP printer prints blank pages from my documents.  When I print any other pages it prints fine.  Thank you

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP printer only prints blank pages from Word or Pages

    My HP all in one printer only prints blank pages from Word or Pages documents, prints ok from anything else.  Any ideas? Have deleted and readded printer removed HP software reinstalled software from Apple etc. Help please!

    If this just happens from these two programs, it's most likely a driver conflict.  If typically using an alternate driver will alow you to get around this.  To try this, add the printer's que to the Mac.  Click the dropdown next to Use and choose a driver that's not for your printer.  Typically the best one to try is another Photosmart dirver, but Deskjet drivers will work as well.  I would make the instructions a bit more clear, but I don't have access to a 10.6 Mac.  Let me know if this works or not. 
    I am a printer tech for HP.

  • EPrint won't print web pages from Windows 8 Microsoft Surface tablet

     ePrint won't print web pages from Windows 8 (x64) Microsoft Surface tablet Any ideas?

    Hello JereTanner,
    Welcome to the HP Support Forums! I see you are trying to print web pages from a Surface tablet. What model of printer are you trying to print to? Also, Is there an error, message, etc, when you try to print? Typically, ePrint is used when printing eMails or forwarding documents / pictures to the printers eMail address, is this how you are trying to print the web page? Since this is a Windows 8 Operating System, you may be able to install full feature software and print that way. When I know more about how you are trying to print, what happens when you try and what printer you are using, I will be able to better help. Cheers,

  • Windows 8.1 printing blank pages from all apps

    Morning Tech Support:  My favorite people!!  This just began within the this week where what ever appl I attempt to print from, prints blank pages.  Upon viewing the print spooler, it shows doc going into printer okay, no probs w/ margins
    or page size (already checked). Printer is Canon MG5400 (newer).  I've already rebooted turned on the computer where the computer is installed.  What else could it be.  Working on installing new updates that just came down as well.  
    HELP!!!!
    s.hamel

    Try install all updates for Windows and check for update for latest version of your printer's software.
    Try run a test print and check if it works.
    Also check the cartridge and make sure they are okay.
    You may contact Canon's support too. 

  • HP PSC 2175 All-in-one prints blank pages from word, chrome and notes

    My HP all-in-one printer PSC 2175 all-in-one has suddenly decided to print blank pages.
    So far I've tried printing from Word, Notes and Photoshop but come up with nothing. 
    It prints test pages and diagnostic pages without any problems and it makes direct copies without problems.
    The diagnostic tool can't find anything wrong. 
    I've run all the software I could find on Swedish HP. 
    I've reinstalled the printer, reinstalled Word, repaired Windows, nothing helps.
    I have Windows XP, fully updated.
    Any suggestions?
    HP PSC 2175

    I am having this problem too - just prints blank pages. Ran the tests checked cartridges settings sanity nothing.Scans fine.I currently have three duff printers in my office which is more than frustrating...

  • Hp 6510 prints fine from laptop but only prints blank pages from ipad

    Printer prints fine from my laptop but will only spit out blank pages from my ipad.  It used to print fine from the ipad.

    RESOLVED!!!!
    I called HP regarding this issue, and was connected with a very nice woman out of India, Lola, who resolved the problem for both my Google Nexus 7 tablet running android 4.4.4 and also my iphone 5s.  Its the printer, and its wi-fi connection, along with the app.
    Here were the steps to resolve:
    1. Make absolutely sure you dont have a cable going into your printer from your router or modem.  Then make sure your connected to wi-fi if on your printer if you did.  (If you had a cable connected, re-run the wi-fi setup wizard for your printer, preferably on the printer itself, not your computer.
    2. Sounds crazy, but verify your wi-fi is actually on.  Click on the wi-fi button on your printer, and you should also have a light that signals your wi -fi is actually connected (at least on the Officejet 6700 that I am using, it does).
    3. Make sure you still have HP Eprint on your phone and/or tablet.  Check that you have your settings correct in your HP Eprint setup options, including the email address you want to use for your account.  If you don't, you will need to enter it, then click activate on HP Eprint.  It will send you a code via email. Copy/paste the code into the HP Eprint setup.
    4. Once you're sure you have your printer re-connected to wi-fi correctly, and no cables attached; resart your printer, and re-start your phone/tablet.  Once everything has re-booted its time to test....
    5. Test Printing: First test printing drictly from HP Eprint's app, selecting a file... then test using a webpage from your browser, to ensure its running correctly through Airprint (which is best, secondary is Google Cloud Print).
    If you are still having trouble, re-boot everything again, double check your wi-fi on your printer, and that you have your settings correct in your HP Eprint from above.  If that doesn't work for you, call HP at (855) 785-2777 and select HP EPrint for assistance.
    Good Luck & Happy Printing!

  • Printing blank pages from Safari

    Trying to print a page from the web on Safari.  When print preview opens it shows a blank page.  I've tried to save as a PDF with the same results.  This is getting frustrating.  I shouldn't have to import things into preview or Adobe to print form the web.  Any suggestions?

    Back up all data.
    Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • HP845C only prints blank pages in Windows 7

    In Windows XP my HP845C printer works fine, in colour and black and white.
    After upgrading to windows 7, first there was an issue with the printer, during the issue solving the search for a driver was started but no driver was found, but Win7 said printer is now OK.
    When printing a page from several programs (internet, paint, word, ....) the printer starts working, the heads start swinging, the page goes forth, but no ink comes in the page. The ink is not empty, because no lights show on the printer and on the computer that is not upgraded yet, the printer works fine.
    Anybody an idea how to solve this besides going back to XP? 

    Hi - Try following the steps in this document.  It will walk you through installing (or reinstalling) the DJ845C that comes with Win7.  The driver that comes with Win7 should work just fine, though it won't support things like the toolbox or allow you to check ink levels.  You might also try plugging and unplugging the USB cable on both the printer and computer to make sure you don't just have communication issues.
    Not sure about Virtual XP, but bottom line is you shouldn't have to go that route - the driver in Win7 should be working.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • My Brother MFC-J615W prints blank pages from Firefox 3.6.18

    The printer works fine with other programs, prints blank pages form Firefox.

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
    Make sure you reset all the prefs for that printer.

  • HP c309a printing blank pages from new Dell Win8 laptop

    I have a c309a installed on the network via LAN to the router.  It works fine with Win-Vista and Win-7 computers wired and wirelessly connected to the network.
    A new Dell laptop with Win-8 is connecting to printer, but nothing but blank pages comes out of the printer - even when trying to print a test page from Printer Properties in Windows.
    I have tried to istall the complete HP printer software from the HP website, also via HP Print and Scan Doctor, which din in fact install on the laptop, as well as from the disc that came with the printer - but in vain.  I have downdoaded the software repeatedly. It runs the file extraction, but nothing happens when done.  Not even an error message.  When attempting to run setup.exe from the disc, nothing happens either. The disc runs for little while, then stops.  No error massage in this case either.
    I have removed the free McAfee security program that came with the laptop, in the hope that it was terminating the installation, but to no avail.
    Please help!   

    Hi viben,
    I understand you are having issues installing the HP software on your new Dell with Windows 8, and that you can not print from the windows 8 machine as you get only blank pages. Please try the following steps and let me know how it works out.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > HP Photosmart Premium Fax All-in-One C309 Series Full Feature Software and Driver
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    It is a good idea to keep your antivirus and firewalls off while troubleshooting, but don't forget to turn them back on after!
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP 722C prints blank pages from Word 2010 But can print successfully from Internet Explorer 9

    I installed the patch from HP for my printer.  I can print successfully from IE 9.  However, blank pages are all I get when printing documents from Microsoft word 2010.  My operating system is Windows 7 64-bit. home premium  I do not get any error messages when printing.  Any suggestions are appreciated.

    I still cannot print from Word 2010.  I can print from Adobe reader.  I did uninstall and reinstall Office 2010.  I still cannot print from Word 2010.

  • 8500A plus print blank pages from the internet

    I just purchased my 8500A plus a week ago, over the last two days, everything I print from the web prints blank and labels the topic of the page in the right hand corner "page 1 of 1". Is there anyone else who is having this issues?

    Hi,
     May I know what internet browser you are using...is it IE?Mozilla Firefox?
    You can use this document to address the issue, kindly click here.
    Kiko

  • Safari Printing: Prints blank pages from Safari

    I can print from Word and other applications, but it just prints blank white pages from Safari- everything in Safari- not just e-mail.
    Already reset Safari
    Already downloaded Mac updates
    Help!

    I found one possible work around. I too tried to print a multipage TV schedule from Safari. Printed first page and then multiple blank pages. Tried saving the schedule to PDF and Preview did the same thing. . .printed first page and then blank pages.
    Finally opened the PDF file with Adobe Reader and it all printed out just fine. Hope this helps until Safari is fixed.
    BTW I just upgraded to tiger and then 10.4.3. Before upgrading I deleted all the HP 6110 software and rebooted. Then I upgraded to Tiger and ran the Combo 10.4.3 updater. Then I configured my 6110 using the Tiger installed drivers and it printed fine. Then I downloaded and installed the current HP software and installed that. Everything works perfectly, scanning docs and pictures, coping and regular printing.
    Doug

  • PC users print blank pages from Interactive PDF

    Hi,
    We have an interactive pdf that was created in Indesign CS6 on a Mac. It prints fine on all our printers. But our PC users either get an error message that they need to choose a printer, printer not found, or it prints mostly blank pages.
    "This is what one user told me...If I indicate to print page 1 only.  It prints with no problem.  If I indicate, pages 1 through 5 or 2 through 5, I get a prompt that says unable to start print job, is printer available...and then a blank page comes out.  My printer is a HP Photosmart 8250."
    Something about the interactive PDF not working on a non-postscript printer?
    What's up, please help.....
    Thanks in advance.
    Sudi H Scott

    I'm a Mac Pro OSX 10.8.5, not sure what OS the other designer has, but similar to me...
    I do not know what version of Reader the users have. Varied versions most likely.
    Also, I created the same kind of interactive document last year in CS 5.5 without an issue.

Maybe you are looking for

  • Deleting all images from iPhone (ios 6.1.4)

    I am currently trying to delete all the images from my phone to clear space for other applications. (Transferring them to my computer was an excruciating process and actually forced me to purchase an external program, but I digress.) I can't delete p

  • Sales Order Confirmation when sales order goes for Credit Block

    want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block How i can Achieve this? Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is no

  • Making a stop motion movie with stills. Please help!

    I have a question for someone really smart:)... I am making a stop motion movie on imac with still photos.  when i select a photo from iPhoto, and add it to the imovie project, it is adding multiples of each picture and i have NO idea why.  I dont kn

  • On my macbookpro I can't eject a mini CD have tried everything

    mac bookpro - I cannot eject a mini CD

  • LDAPv3 not working with Workgroup Manager

    Hello, I recently started at a new job, and it appears the previous guy did not know how to set things up properly so I have been fixing all of his mistakes. But this one has me pulling out my hair. Anytime I try to set the Workgroup local directory