Printing Borders in Elements 10

I print images on geetings cards and want to put a fine border round the image.
I could do this very easily in Elements 7 just by defining the border at print time.
I've tried the same thing in Elements 10 but am unable to get an even border - Top and left aremostly OK but left and bottom borders are very fine to non-existent.
I can't seem to find any way to correct this or any help information on this.
I suspect the "photoholder" has something to do with it but can find no way to turn the photoholder off.
I'm using a Canon Pixma Pro 9500 Mk II

  It’s probably best to prepare your prints in advance. In this example I prepared a photo 6 x 4 at 300ppi.
If you select center image in the print dialog and use a larger size sheet of paper, you will automatically get a border.
Obviously in this case it’s exaggerated because I’m printing on A4, but its simply to illustrate the point.
  Click to view

Similar Messages

  • How do i set dpi for picture printing in photoshop elements 4

    how do i set dpi for pictures to print using photoshop elements 4 . . . thank you.  i do not mean resolution but the dpi asnd if i can't then what version would be able to do it . . .

    You can set that under Image>Resize>Image Size and uncheck Resample Image and enter the Resolution
    http://planetphotoshop.com/explaining-image-resolution-and-view-print-size.html
    http://graphicssoft.about.com/od/photoshop/l/bllps502x6.htm

  • Printing in Photoshop Elements 10

    When printing in Photoshop Elements 10 with 'Centre Image' checked, the printed result is not centred top to bottom, 3.5mm off centre, this causes problems when printing both sides of the sheet 'Tumble-Turn'
    The ptinter is a Canon Pixma MG6150. Any Ideas???
    John C,  Essex UK

    Are the graphics for each side cropped to the same size prior to sending to the printer, and is the resolution of each the same value?
    Have you tried printing from another application?
    Do you have the latest drivers installed for the printer?

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Problem removing grid lines from prints in PhotoShop Elements 13

    I cannot remove faint grid lines from my prints in Photoshop Elements 13, even after I've turned off the grid overlay. How can I get these lines out? I'm desperate as I am writing a book and am stymied at this point. Help!

    John Maggot wrote:
    I cannot remove faint grid lines from my prints in Photoshop Elements 13, even after I've turned off the grid overlay. How can I get these lines out? I'm desperate as I am writing a book and am stymied at this point. Help!
    The grid does not print. There has to be another source for the visible grid lines on your prints. Suggest that you do the following:
    Make sure that your ink cartridges have plenty of ink
    Do a deep cleaning of your print head
    Align the cartridges as per instructions in the printer's manual
    Do a test print

  • Print different text elements on the same line

    Hi all,
    1.
    Is it possible to print different text elements on the same line ? with multiple write_form
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
             element       = 'TITLE1'
             WINDOW        = 'INFO'
         EXCEPTIONS
              ELEMENT       = 1.
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
             element       = 'TITLE2'
             function      = 'APPEND'
             WINDOW        = 'INFO'
         EXCEPTIONS
              ELEMENT       = 1.
    How to print TITLE1 and TITLE2 on the same line ?
    TITLE2 in bold.
    2. How to print 2 text elements on the same line with include statement ?
    /: include test1 ...
    /: include test2
    Thanks
    Edited by: Moo Yac on Sep 22, 2008 8:23 AM

    To be more specific :
    I want to print the following
    Text_symbol1:$Var1$      Text_symbol:$Var2$
    on the same line.
    where Text_symbol1 and Text Symbol2 are defined in SO10 for different languages.
    Thanks.

  • Page number after printing a text element in SAPScript

    Hello to all,
    is it possible to know the page number in which SAPScript print a text element?
    Thanks and regards
    Franco

    Hi!
    &PAGE& variable gives you the actual page.
    /E MYELEMENT
    /: DEFINE &MYPAGE& = &PAGE&
    I hope it works...
    Regards
    Tamá

  • Long Text Printing in TEXT ELEMENTS of a Script

    Hi,
         I am printing the amount in words using Subroutine pool program. This amount is populationg fine in the program(in out_table structure ITCSY). I assigned those symbol for printing in text elements. While printing the last words are not printing.
    Here ex: One Crore Thirteen Lakhs Ninety Two Thousand Four Hundred and Ninety Six and Paise Sixty Seven Only--- it has print like this
    but it is printing
    One Crore Thirteen Lakhs Ninety Two Thousand Four Hundred and Ninety Six and Pa---only. Remaining are not coming.
    please suggest how to get the full text.
    Regards,
    Mahesh.

    First you need to understand that a variable in a script holds no more than 60 to 70 characters.
    so what you should do is, in your subroutine pool declare 4 variables each of size 60 chars, and then move the amount in words 60 chars each and then pass these 4 variables to the script and use these variables to print.
    This solves your problem.
    Regards,
    Termi.

  • Printer Profile In Elements 8

    How do I set a printer profile in Elements 8?

    I have to change this for every print. I have a Canon Pro9000. When I set the printer profile for
    my Ilford paper at the next print I find that the profile is reset to a Canon profile and I have to change it again.
    Is there any way to make it stay on a given profile as all I use is Ilford paper.

  • Where can i download & print the photoshop elements 12 manual

    where can i download & print the photoshop elements 12?

    Moving this discussion to the Photoshop Elements forum.
    JaxsWawa I don't believe there is printable manual available for Photoshop Elements 12.  Instead the help content is primarily available via help files.  The Users in the Photoshop Elements forum though may have additional suggestions on resources which you can obtain.
    There is also several getting started tutorials available at http://helpx.adobe.com/photoshop-elements/topics/getting-started-tutorials.html.

  • My printer takes forever to print from photoshop elements 9

    my printertakes forever to print from photoshop elements 9 then when it prits the crop is wrong, lots of noise or distortion. It only does this in adobe photoshop elements 9.

    Yes it is different from what I see in print preview. I have been saving the file and picking it up in windows to print its so much faster and predictable. It takes forever to print from p-e. I read somewhere the printer needs to be calibrated for color but shouldn't have anything to do with crop or printing speed' Thanks
    Den
    [email protected]

  • How do I print Adobe Premiere Elements factory defaults Keyboard Shortcuts

    How do I print Adobe Premiere Elements 12 factory defaults Keyboard Shortcuts

    biginno
    Please check my blog post for all the Premiere Elements 11 and 12 keyboard shortcuts as offered by Adobe under
    Expert workspace Edit Menu/Keyboard Customization/Application as well as Windows
    Premiere Elements 11
    http://www.atr935.blogspot.com/2013/09/pe11-keyboard-shortcuts.html
    and
    0016 PE12 Keyboard Shortcuts in the following
    http://www.atr935.blogspot.com/2013/09/pe12-daily-discoveries.html
    The keyboard shortcut commands for version 11 and 12 are the same except for some minor difference as noted in 0016 of the Premiere Elements 12 Daily Discovery blog post.
    If you need clarification on anything written, please do not hesitate to ask.
    Thank you.
    ATR

  • Are there any plugins or software to add frames or borders to Elements 10?

    Are there any plugins or software to add frames or borders to Elements 10?

    You can also check out couple of action shipped by default for borders under Window->Actions.
    More info on help link here http://helpx.adobe.com/content/help/en/photoshop-elements/using/whats-new.html#id_13929

  • Photoshop elements 8 uneven print borders

    Hi, I am using elements 8 with a Canon pixma pro 9500 MK2 /Windows 7 and regardles of paper size the right hand border i.e. the last peice of paper coming through the printer is around 1.5 - 2mm wider than the other borders.The printer comes with easy photo which prints the image centered with even borders. Has anyone come across this before?

    Hi Garry,
    Thanks for taking an interest in my printer problem. The canon printer is on the latest driver and will print centered from canon easy photo print but I cant open raw images through it.
    Richard

  • Printing from Adobe Elements 6 and getting unwanted borders

    I recently had to get a new Epson printer.  I previously had an R1800 and now have the 1400.  When I used Adobe Elements to open and print a photo that I have printed in the past without a border now prints with a 1.5" border on the right side and the bottom of the 8.5 x 11 glossy sheet.  But when I open the pic in other software it prints the full 8.5 x 11 sheet with no borders.  When looking at the print box it shows the pic without borders but then when it prints it has the borders.  I even click "borderless" but that does not work either.  The only thing I changed was the new Epson printer.  Please help.

    mine does not look like that ....the 3 boxes are "page setup" ....."print"......"cancel"......there is no "more options" box to click.
    I do require payment in full on orders under $500.  You can use this email for paypal.
    If you are shipping me something"PLEASE DO NOT REQUIRE A SIGNATURE”
    Best regards,
    Teresa
    Lil' Louky Hair/Make-up/Tanning Schedule
    June
    25-27th, Fresh Faces, Daytona, FL
    July
    15-18th, Fabulous Faces, St. Petersburg, FL
    23rd, Chirstmas In July, Birmingham, AL
    30th, Sunburst Internationals, Altanta, GA
    August
    14th, Celebrity Mini, Charleston, WV
    21st, AUE, Louisville, KY
    September
    25th, TDS, Atlanta, GA
    I do require payment in full on orders under $500.  You can use this email for paypal.
    If you are shipping me something"PLEASE DO NOT REQUIRE A SIGNATURE”
    Best regards,
    Teresa
    Lil' Louky Hair/Make-up/Tanning Schedule
    June
    25-27th, Fresh Faces, Daytona, FL
    July
    15-18th, Fabulous Faces, St. Petersburg, FL
    23rd, Chirstmas In July, Birmingham, AL
    30th, Sunburst Internationals, Altanta, GA
    August
    14th, Celebrity Mini, Charleston, WV
    21st, AUE, Louisville, KY
    September
    25th, TDS, Atlanta, GA

Maybe you are looking for

  • Adobe Reader 9.4 has started to open all my PDF documents continuously

    Recently, every time I open Adobe Reader, or click on a PDF document on file to open it, Reader starts opening all PDF documents on file continuously until I get a message saying there are too many open documents to open any more.  The only way out a

  • Getting ServletRequest in a JSP page?

    Sorry about the newbie question, but how do you access the ServletRequest object in a JSP page? Specifically, the getParameter() functions? In servlets it's easy, the objects are passed in the doget() and dopost() functions, but I have no clue how to

  • Rule converstion from Approva to SAP GRC AC RAR 5.3

    Hello All, We have rule files of approva in XML format , please let me know is there any short cut mettod or process to change it into SAP GRC Rule files Please help me on this..... Thanks in advance Jagat

  • Thinnest line weight for offset lithography

    I'm wondering if anyone has had much success with printing a screen of 50% black in .25 pt line weight. Will that hold up, or simply break up into a dotted line on press? Let's assume I'm using 175 lpi. Thanks!

  • Generate next publication in multi folio app

    Hi, How can I generate a next publication in my multi folio app in iPad, if I´ve published and notificated these new publication?