Printing Business Graphics

Hi all,
Using WD Business Graphics I've generated a Gantt chart in my application. Now I want to print that chart. I tried the simplest way- right clicked the chart and gave print. But it printed only a single page and the chart being a lengthy one, I could get only a part of it in the printed page.
Is there a better way to print business graphics?
Regards
Shyam.

Hi,
You can use the PRINT_PREVIEW Command and set the pages and print the Jgannt.
http://graphics1.wdf.sap.corp:1080/jnet/Home.html
Regards
Ayyapparaj

Similar Messages

How to print a Business Graphic

Hi all.
I need print a graphic from my webdynpro app, and i dont know how. I wanna know if it is possible and if so, how can i do it.
Regards.
Gregory.

I see that the Graphic is an image and its URL is something like:
http://SERVER:PORT/webdynpro/dispatcher/local/PROYECT/APP/~wd_key6_1217603081014/.gif?sap-wd-download=1&sap-wd-cltwndid=914dfee25fda11dd8a2d00145e1dab1c&sap-wd-appwndid=914dfee35fda11dda9c000145e1dab1c&sap-wd-norefresh=X
Can I get this URL? If so, how?
Regards.
Gregory(Peck).

How to stop the guesswork with printing business cards

Hello everyone, when I print business cards I use one of those 10 blank business cards per sheet paper.
I scan the image of the blank business card template, then I import to Illustrator and then I make the business cards.
The problem is when I print sometimes I get some of the design cut and have to print again until I get it right.
My question is how do I get rid of the guesswork when it comes to printing business cards on a 10 card per sheet? (I believe the problem occurs because my scanner is not exactly 8 1/2 by 11 and therefore there is some margin for error)
I know I could use Indesign, but since I don't have Indesign (and may not have it in a future graphic design job) how do I do it in Illustrator?

There should be no guesswork if you set up your Artboard, guides, etc., accurately.
I never do this by scanning and tracing a card template sheet, by the way. It only takes a few minutes,to take accurate measures from the sheet and enter the dimensions for guides, etc., numerically. That way you are confident, for example, that you do, indeed, use consistent spacing between rows & columns of die cuts. And the question of any scaling/position/distortion from your scanner image becomes moot.
Then you simply have to design to accomodate the inaccuracy of the specific printer--which is almost certain to be the cause of the misregistration--just as one has to do for a printing press. Paper jogs somewhat as it proceeds through a commercial offset press, just as it does (albeit to a greater degree) on an office copier.
If you design graphic elements which are supposed to print all the way to the edge of the cards, make sure those elements bleed beyond the edges of the die cuts. For this reason, try to find card sheets on which the cards do not share edges, but have spaces between them. If you can't find such sheets, then limit yourself to designing bleeding objects which can span across whole rows or columns of cards.
What Scott says about availability of cheap printing online is true. You can also get short-run, on-demand, decent-quality, digital printing in places like Kinko's, Office Depot, etc. But often, the whole point of this excercise is to provide the client (or workgroups in your own company) the convenience of printing a few cards at a time on a desktop device or a networked office printer.
Delivering the card design as an Enabled PDF is great for this; you can create editable fields for the changing content (names, phones, etc.,) and the one document can work for the whole company. Any user can edit the fields in Adobe Reader, save the edits, and print the pre-cut sheets on a suitable office device, or at a quick-copy shop.
Also, consider the actual need for die-cut stock. Even a quick-copy shop running a decent digital press most likely has a paper shear also. Your real materials cost is much higher per card with pre-perforated sheet, toner, and inkjet cartridges, and you have to fuss over the suitability for inkjet versus laser devices. You're paying for convenience at the sacrifice of quality.
JET

How do I print business cards?

I hv an HP officejet 6500 A plus ; windows xp;

Hi,
From its manual (page 69) looks like you need this software.
Marketsplash by HP
Grow your business using online HP tools and services to create and print professional marketing materials. With Marketsplash, you can do the following:
• Quickly and easily create amazing, professional-quality brochures, flyers, business cards, and more. Choose from thousands of customizable templates created by award-winning business graphic designers.
• A variety of print options allow you to get exactly what you need, when you need it. For immediate, high-quality results, print on your printer. Other options are available online from HP and our partners. Achieve the professional quality you expect, while minimizing printing costs.
• Keep all of your marketing materials organized and readily accessible in your Marketsplash account, available from any computer and directly from the printer’s control-panel display (on select models only).
To get started, select Marketsplash by HP in the HP printer software that came with your printer. Or for more information, visit marketsplash.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Refresh the Business Graphics Data on click of next page event of a table

Hi Experts,
We are using Business Graphics UI element in Web dynpro Java to display a table data.
We are limiting the graphics data to 12 table entries at a time.
Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
But I am not able to get the action for the Next Page event.
Please note that we are on Netweaver 7.01.
Kindly suggest as how can we achieve this functionality.
Kind Regards,
Anurag

check this
Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance

Printing a graphic with a gradient mask in Flex 3-problem

Hello, I am fairly new to flex development. I am puting together a little program that allows the user to upload a picture add a vignette mask in order to achieve a soft edge, and have a problem I cannot find an answer anywhere, maybe someone could help me please.
I want to print a the user photo with a gradient mask or vignette from flex. I managed to show the image correctly on screeen with the gradient mask using this class but the output to paper is a rectangle without the soft mask.
//package to add the mask for display
package com.dm.graphics
   import flash.display.Graphics;
   import mx.containers.Canvas;
   import flash.display.GradientType;
   public class FrameBorderSoft extends Canvas
      override protected function updateDisplayList(w:Number, h:Number):void
         super.updateDisplayList(w,h);
         var g:Graphics = this.graphics;
         g.clear();
         g.beginGradientFill(GradientType.RADIAL, [0x000000, 0x000000, 0x000000, 0x000000],
         [1,1,0.8,0],
         [1,128,195,255],
         horizontalGradientMatrix(0,0,w,h) );
         g.drawRect(0,0,w,h);
         g.endFill();
It works beautifully until I try to print the graphic. The image prints but without the gradient edges (soft) instead it is just a sharp edge rectangle.
Does anyone know how to do this?
Here is my print function:
private function doPrint():void {
                // Create an instance of the FlexPrintJob class.
                var myPrintJob:FlexPrintJob = new FlexPrintJob();
                // Start the print job.
                if (myPrintJob.start() != true) return;
                // Add the object to print. Do not scale it.
                if (tabnavigator1.selectedChild == img1) {
           //switchcolor is a variable to detect if the user changed the background to white or clear.
                         switchcolor = 100;
                      //printCF is the card front container with the photo masked
                   myPrintJob.addObject(printCF, FlexPrintJobScaleType.NONE);
                   myPrintJob.printAsBitmap = false;
                } else if (tabnavigator1.selectedChild == img1b) {
                   switchcolor = 100;
                   myPrintJob.addObject(printCB, FlexPrintJobScaleType.NONE);
I hope this helps to visualize,
I would greatly appreciate any assistance or advise.

Hello, back on my issue, i tested a little bit more the message dispaching.
I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
So i added copy of my module:
     <cairngorm:ParsleyModuleDescriptor objectId="test"
          url="TestModule.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
     <cairngorm:ParsleyModuleDescriptor objectId="testbis"
          url="TestModuleBis.swf"
          applicationDomain="{ClassInfo.currentDomain}"
     />
Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
I compiled with
-keep-as3-metadata+=ModuleId
but this hasn't changed anything...

Business Graphics - Bar Chart - How to make the height extendable

Hi Experts,
I have created Business Graphics UI element for my WD application which fetches data from R/3. I am displaying
1) Cost Element in Y-axis and Cost in X-axis.
2) I have set ChartType = Bar, height = 300, width = 830
When the no of cost elements is upto 7-8, the graph is getting displayed correctly.
However when the no of cost elements increases to more than 12, the graph becomes un readable. The system displays lot of texts in Y-axis.
I want to make sure that if no of cost elements increases, the Y-axis of graph should extend.
How we can do so?
Regards,
Gary

I could not got any solution of this issue. Finally I convinced the customer to display only top 10 records. Any way higher level managers won't have time to see the graphs of all data.
One way of resolving the issue is like this - create say 3 Business Graphic UI element. The height of Business Graphic UI element can be set as 300, 600, 900 etc.
For 10 records use Business Graphic UI element of height 300.
For 20 records use Business Graphic UI element of height 600.
For 30 records use Business Graphic UI element of height 900.
Use the 'Visibility' data type to hide / unhide the Business Graphic UI of different height.

How to print the Graphical of WF template to a document?

Hi All,
I want to print the Graphical view of the WF template in a Document or a JPG file.
There is a option to print the Graphics to File. It works fine for Smaller workflows. My workflow is too big with more than 50 - 60 steps.
How can I do this?
Thanks,
Sivagami

You have to use "Print to File: option only. Even if you have some direct option a single page in your document cannot occupy your whole workflow template.
When i was preparing my technical documents i used the same option and then had cut the document into seperate viewable pages in MS paint and pasted in different pages.
Alternatively you could also embedd your JPG as a embedded file in the document but the former method will give better clarity to the reader.
Thanks,
Prasath N

HP LaserJet 2300 - "Printer Busy"

I can only print one job on the 2300 without physically switching the printer off & then back on.
If i try to print a second document without doing this i get a "printer busy" message.
I am running OS 10.4.6 but have had this problem with all versions of Tiger. Had no problems when running Panther.
Anyone help??
G4 Mac OS X (10.4.5)

Hey I have found it!
Solution1. Start > Control Panel > Printers
2. Locate the printer > Right Click > Properties.
3. Device Settings > Mopier Mode > Set to Disabled.
4. Apply OK

Edit customisation in Business graphics is not working

Hi Experts,
I created business graphic UI element of chart type "Speedo meter" . I am trying to chnage the colors of the chart by using
'EDIT CUSTOMISATION' .When i change the clors in preview colors are chnaging but when i test my application it is nit showing the whatever i did in edit customisation ( ni color change ) . Please tell me do i need to configure anything ?
Thanks in advance,
Setu

Hi,
please refer below link .
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ca932ebc-0901-0010-68a0-b4dd81a4bf81&overridelayout=true]
Regards,
Priya

How to use series in business graphic ui element

Hi All,
How to use the series in business graphic ui element? my requirement is i have to display the sales in selected months in graph(these values dont know at design time).
Regards
Srikanth

Hi,
Use the dynamic node and bind this node to the BG source node and series nodes.
Create a node and bind this node to the BG source and the value that you want to shown in series has to be bound to that attribute of the node and similarly with the category.
Check out for the dynamic node creation and bind this node to the BG.
Regards,
Lekha.

Business Graphics API in WEBAS J2EE

Hi,
i have a business graphic integrated into my webdynpro application. I checked the api documentation for business graphics and found out, how to change the type of the business graphic and the number of dimensions programmatically.
On the API, i cannot find out any further possibilities of modifing the chart programmatically. I wonder about this, because the business graphic UI - element in NetWeaver Developer studio provides much more configuration possibilities on charts.
For example, i would like to use the averagre functions or adapt the number of labels on the chart axis. But all dynamically.
Has anyone experience, with such advanced business graphics features and nows if it is somehow possible to get to theses features by using the NetWeaver API?
Thank you very much in advance.
Regards
Christoph

As I understand, your user management is through database, so when a user is created in your application, the parameters pass through the Action Handler -> service class-> DAO. So a better way would be write an additional class with the user management implementation of BO with a constructor or a method which would take the required user creation parameters and call it in the service class just under the user creation method of your DAO.
As the user in your system passes some information from the front end, the same can be used to create user in BO.

Business Graphics and WebEnterprise

I have a two part question.
First, what is the best way to create business graphics such as line, bar,
and point graphs? OLE to Excel, OCX, some third party commercial graphics
library such as Brahma Software's Beacon?
Second, once I have a business graphic what is the best way to display these
graphics on a web page? A number of Forte field widgets such as ellipse,
polyline, and point do not have a corresponding HTML element and therefore
the Forte WebEnterprise WindowConverter class cannot convert these windows.
Is there a way to save Forte images as BMP/JPG images?
Thanks,
Douglas Wheeler (mailto:[email protected])
BORN Information Services, Inc. (http://www.born.com)
Tel: 612.404.4379 Fax: 621.404.4441
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

exactly!
many ways to do this
1.U can use WDCopyService(Source ,Target) here Source : return node of model data
Target : Your temporary value node which bound to BG.
Note : Each time when ever model data get updated(CRUD) u have to call this node.
2. Use Mapping type node and bind it to BG ui element exe : when we create any node It has 4 options one of them is Mapping select this and provide the model node
(mapping of node with model node is replica of the content there in model node, here u don't have to worry about updated content since its replica and get changed eveytime when model operations is performed)
Best Regards
Satish Kumar

Problem with Business Graphics

Hai,
I am using Business graphics , I Used to display the simple series in a <b>coloumns</b> graph.
I want to display the total amount of the graph in top of every coloumn..
I want to display the value of the coloumn at the top of the coloumn.
i need the above graph as
3
2
1
   |----
How to display the values in graph like this.....
regards,
Message was edited by: Naga Raju Meesala

hai,
my context structure is like this
    +ABC
       series2(double)
       series3(double)
       series4(double)
       series5(double)
       series6(double)
My UIElement Structuer
     +BG1
        Category1
         SimpleSeries2
         SimpleSeries3
         SimpleSeries4
         SimpleSeries5
         SimpleSeries6
code is like this..
IPrivateFBGAppView.IAbcNode aNode = wdContext.nodeAbc();
     IPrivateBGAppView.IAbcElement elm;
elm = wdContext.createAbcElement();
     elm.setCategoryText("Cat");
      elm.setSeries2(32);
      elm.setSeries3(23);
      elm.setSeries4(45);
      elm.setSeries5(32);
     elm.setSeries6(18);
     al.add(elm);
regards,
Message was edited by: Naga Raju Meesala

Problem with Business Graphic:

Hi Everybody!
I am working with a UI control Business Graphic in WebDynpro Java,
I need to change the text of the legend, and is taking an automatic value, what is the property in the Chart Designer where I can adjust this?
Thanks in advance for your help.
Edited by: Briger Palacios on Jul 6, 2011 11:16 PM

Hi Briger,
For Changing ur own legend , just write the label property of "SimpleSeries" ,which comes under your "BusinessGraphics" .
As many simple series will be there, that much no of legend is require, so just write your label of each simple series.
if any doubt , plz let me knw.
Regards
Brajesh Kumar

Printing Business Graphics

Similar Messages

Maybe you are looking for