Printing Canon ip4850

Ever since i downloaded Mavericks i can't seem to print properly via iPhoto
When i try to print a picture it effectivley makes the image too big for the size of the photo paper i'm using ..the image prints but i only see half of what i should do as the image appears as if it has been "zoomed in"
I've downloaded all the newest drivers from the Canon website but this has not fixed the issue..
any idea's ?

So after selecting to print a photo, do you see a similar view as below?

Similar Messages

  • How to connect my mac book pro to network printer Canon IR 2010f?

    I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

    The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
    What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
    If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
    So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
    One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

  • Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

    Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
    Thanks!!

    you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release.  Then wait for the phone to boot back up.  You won't lose any data.

  • HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

    my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

    my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

  • MacBook Pro won't detect network printer Canon MF4150

    I have a multifunction printer, Canon MF4150, hooked upto a PC Desktop and I have enabled printer sharing. The printer is detected and works fine on my PC Laptop. However, when I try installing it on my 13" MacBook Pro, the **** thing won't show up. It doesn't show up under the Windows category of Print and Fax so I tried to set it up the way Apple has suggested in their support section. It asks you to go to advance and input the IP address and location of the printer and then select the printer driver. I would post the link but I conveniently can't find it right now. The printer driver is obviously not listed on the list, so I go to the Canon website and download a mac version of the driver and install it. When I check to see if it's on the list now, it says MF4360-MF4390, but not MF4150. I thought I had installed the wrong one but I downloaded and installed it again, and I got the same problem. Anyone have this printer or have a similar problem? Another way to hookup this printer would be much more convenient, is there anyway that the Window tab could detect it? Any help is appreciated!

    The warranty must be close to running out. Take it ASAP to the Apple Store or AASP and have it checked.

  • Staple problem with printer Canon iR-ADV 8205

    Hello,
    I work with output designer 5.7 and when i try use option staple with canon printer Canon iR-ADV 8205 the document is print and staple, but the pageconter is equal zero. What can i do for print my document correctly?
    Thanks Julio.

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • How can i connect my printer canon pixma mg7150

    Hello,
    I don't find the good driver for my printer CANON PIXMA MG7150, and i use a usb cable.
    Is it good ?
    Thanks

    I have been setting up the same printer this week, with a USB cable  to my iMac. I have taken Mac printer drivers from the Canon site.   Here is a link that I used.
    http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/ InkJet/PIXMA_MG_series/PIXMA_MG7150.aspx?type=download&softwaredetailid=tcm:14-1 091005&os=OS%20X%20v10.9&language=EN
    Apple have notified that they have newly updated printer drivers for this printer, which you can download if you have the other drivers in place.
    Hope this helps.

  • Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

    I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?

    Printopia is Macintosh-only.  <Printopia for Macintosh>
    Another program that is available in both PC and Mac versions is FingerPrint.  <FingerPrint>
    For either program, your computer must be on and awake any time you want to print.
    Fred

  • Lightroom 5.7 with printer canon ipf 6450

    Hi, i've a problem with lightroom 5.7; i'm unable to print with the print module on my canon ipf 6450 (can't manage the colors by lightroom. i'm using Mac Os X 10.9.5. No issues at all with CS6 to print!

    Hi Jim
    Here a screen shot:
    Mit freundlichen Grüssen
    Pascal Gai
    Chasseralstrasse 15
    3212 Kleingurmels
    www.pascalgai.com
    Am 30.12.2014 um 15:03 schrieb JimHess <[email protected]>:
    Lightroom 5.7 with printer canon ipf 6450
    created by JimHess in Photoshop Lightroom - View the full discussion
    What is preventing you from managing the colors using Lightroom?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7052908#7052908 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7052908#7052908
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour.  Is that correct?

    I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour.  Is that correct?
    paul.kelly

    Hi Steve,
    No expert, but since nobody else has piped in...
    Did you setup the DNS Server IP?

  • Configuration printer CANON LPB6020

    Hi Everybody!
    Who can help me through with installing my new printer (Laser) Canon LPB6020, please?
    I just bought the laser printer CANON LPB6020 in Geneva, in a very famous commercial store. But... Impossible to install it:
    1. connexion USB:  Canon LPB6020
    2. System Preferences / Printers / Add a printer / Canon LPB6020
    3. Canon LPB6020 appears on my Mac screen. I is asked for configuring Canon LPB6020: ... but, LPB6020 software IS NOT in the list provided by Mac.
    IMPOSSIBLE TO CONTINUE !!!
    In Canon website, I downloaded the software for Mac, but I can't open it. Mac doesn't allow to open this installer.
    I wrote to CANON assistance... and I'm waiting for an answer for long...
    If a MAC user can help me please....
    Thank you in advance
    Amelkis

    Amelkis wrote:
    First, in SYSTEM PREFERENCE of my Air Book, for  adding my new printer, CANON LPB6020 (connected with USB)...
    In the CONFIGURATION window posts the following remark: "the software for this printer is no available at Apple. Please contact the manufacturer for getting the latest software".
    Canon does not provide the CAPT driver used by this model to Apple. So that is why you get the message that you must get it from the manufacturer (Canon).
    Amelkis wrote:
    So.... I go in CANON website / Assistance /downloading software LBP6020 for Mac OSX 10.9 version...
    I download "Mac_AutoShutdownTool_V100_uk_EN"
    I don't even see this utility on the Canon Australia web site but it's not the driver you need. Here is a link to the Canon CAPT v3.66 driver for your LBP6020
    http://support-au.canon.com.au/contents/AU/EN/0100420705.html
    After you download this driver and run the installer, you will get many models of Canon LBP in the Printer Software window and your LPB6020 will be one of them.

  • Problem printing MAC-PC for a multifunction printer Canon i-SENSYS MF4018

    In my office, installed a network of Macbook 466 (Mac OS X 10.6.2) and PC (WinXP SP3). We bought a new multifunction printer Canon i-SENSYS MF4018(MF4010). By PC connected multifunctional printer MF4018 (model has only a USB port).
    On the PC works well. My MAC is the printer on the network, but at the beginning of printing an error: Canon UFR II Printer Driver An error occurred.: -50. Driver downloaded on the official web-site Canon - CANONUFRIIV2.00 EN.dmg.
    Please, help set up a complete operation of the printer in my office from the MAC.
    How to make it possible to print from MAC without any errors?

    Pahu and Eliask,
    I just purchased a canon isense mf4018 for our office. We have a mac mini os x 1.5.8 and a pc windows xp sp3. we are experiencing a printing problem from the mini. we aren't using a network. we just swap the usb cable between computers when printing is needed. The error that occurs is 'load correct paper MP tray: ltr; cancel: sys. monitor.' This looks like it only happens when we print from Word for Mac when printing more than one copy of the document. Excel printed multiple copies fine. If i go to sys monitor and print status, I find the word doc option to cancel or continue print. I choose yes to cancel and it prints another copy of the doc. the error still exists. I go through that routine until all copies have been printed. Scanning doesn't work. I downloaded this driver http://software.canon-europe.com/software/0036890.asp?model=
    Thanks for the help
    Neal

  • Printer Canon MG2450 not recognized in PC

    I've acquired a new Printer Canon MG2450. After ingtalling the driver from CD and/or the official site, I see that the HW is not recognized by the PC.
    I've installed/uninstalled the driver several times, I've plugged/unplugged the USB cable. Even I've tried with another USB cable, Reset the PC, etc... but when I perform the "Diagnose" from the driver, the printer is not recognized.
    BTY: I've installed the pack3 in windows before, as needed.
    Do you have any idea how can I do to fix the problem?
    Thanks a lot,
    Eli

    If you have an external firewire drive attached, disconnect it and try again using Firewire Basic as the capture control protocol.
    x

  • How do I install Printer Canon MF6550?

    Hello,
    I'm trying to install the Canon MF6550 and I can not get it to print. When I go to add a printer "Canon MF6500 Series (UFRII LT)" shows up. I select it and then go to "select printer software" and select "Canon MF6500 Series UFRII LT (US)" but when I go ahead and try to print I get this message "Cannot communicate with the printer, or the printer is not supported, check the printer connection and add it again. Then, if the print dialog box has a printer info button, acquire the printer information: 10322"
    I'm not sure what I'm doing wrong. Any advice would be great.
    Thank you so much,
    Anna

    Hello Anna and welcome to Apple Discussions.
    The UFR II driver used by the Canon MF series requires bi-directional communication. This is usually no issue with the printer connected directly to the Mac via USB cable, however if the printer was connected to some other device, such as a wireless router, a USB print server or even another computer and shared, then the driver is unable to function correctly and shows the error you are currently getting. If you do have the printer connected directly to the Mac via a USB cable then the cable may have a fault and is stopping the communication with the printer.
    Also, not sure if this model supports Ethernet connections, but if it is connected via Ethernet to your Mac then there could be a problem with firewall settings or port filtering.
    Can you reply with how you have the printer connected to your Mac.
    Pahu

Maybe you are looking for