Printing check 2copies from different trays

while printing check, client asking for another one copy for accounting purpose . but they asked to print one copy with check paper from Tray1 and another one with bond paper from Tray2 . but I couldnt take printout in the sametime 2copies from different trays.please advice in your client place how your managing in this scenario.
Thanks in advance

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I understand that you have two types of paper loaded in your Officejet 8630 and are wondering how to switch between the two trays. I can help you with that, however I'm going to need to know what operating system is on your computer first.If you are not sure what your operating system is you can click here to find it. If you can reply with your system then I'll know which directions to provide you.  

Similar Messages

  • Print Multiple Page From Different Trays

    Dear Sir . / Mom  
    How are you ? Hope everything goes well with you !
     I hope this massage will find you as soon as before happy and healthy for you and family .
    and every thing is OK .
    Tanks so much for your good support
    Please send your answer to my email ( please )
    {Personal Information Removed}
    I have a very big problem
    I have a project that the engine of this project is HP Laser ( 2055 )
    As you know :
    In the laser jet we have 2 input ( tray 1 ( manual )   &  tray 2 ( in caste ))
    I have 10 page on one time for print ( 10 page printing continually ( a letter in 10 page ))
    ==================================================
    But I want page  no.  1 printing from tray 1
    Page   2,3  printing from  tray 2
    Page   4,5  printing from  tray 1
    Page  6  printing from  tray 2
    Page  7,8,9   printing from page 1
    And page 10 printing from tray 2
    10 page is 1 document and printing should be in one time
    =========================================================
    Note :
     I would like inform you that
     1      -     There are a software that I can do this program
    The name of this software is  trayselector
    And you can download the free software from the bellow address
    http://www.trayselector.com/download.aspx
    but this software is working on Microsoft word
    and it isn't useful for me because
    My software language is JAVA .
    2     -   in the printer setup ( printer driver )
    You can set printing the first page  in tray 1 and other page printing on tray 2 (only )
    It is not usefully for me too
    Because I need use different tray on different time for different page . (PLEASE  SEE  RED )
    So :
    Your product isn’t useful for me
    I need a procedure for JAVA Software program
    Please help me
    And tell me what I should be do
    I would like inform you that : our model of our printer is :
    HP Laser 2055
    Please send your answer to my email ( please ) as bellow address :
    {Personal Information Removed}
    Thanks so much
    Touraj asrani

    This forum is more focused on consumer level products (and issues).  You may have better results asking in the  Laserjet Small/Medium Business Support Forum here.
    If you are printing directly from a Java app you will probably need to embed tray selection codes as described in this post.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Help - Print first page from different tray

    Hi,
    I print seveal booklets and with my old printer (1200) was able to print the first page from the second tray. That is to have the cover page in a different color and weight paper.
    How do I do this with collated printing with my new Officejet 8500 Pro all in one printer. The option does not appear in the print options as it did for the driver for for the old 1200 printer. 
    I am currently using Vista is this option available with windows 7.
    I will be glad for any help you can give me.
    Regards
    Eddie

    This forum is more focused on consumer level products (and issues).  You may have better results asking in the  Laserjet Small/Medium Business Support Forum here.
    If you are printing directly from a Java app you will probably need to embed tray selection codes as described in this post.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • In adobe reader, I can't print from different trays?

    Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer.  I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck.  I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays.  It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe.  Any suggestions?
    I've also noticed a problem printing through Preview.  I can select different trays using preview but the print time is extremely slow.  It seems like it has to re-download the pdf page each time it goes to print.  So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
    Thanks for your help.  Also, I am using the mountain lion operating system.  Thanks again! 

    Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
    http://www.macupdate.com/app/mac/73/adobe-reader  (version 11.0.03).

  • Smartform printing all pages from 2 trays

    Hello all,
    can we print Smartforms from 2 diffrent trays we have a tray selection option in smartform but is there a way we can print all the pages from tray 1 as well as tray2?
    for example if i have 3 pages i want to print all 3 pages from tray1 as well as tray 2.
    Thanks,
    Moderator message - Moved to the correct forum
    Edited by: Rob Burbank on May 28, 2009 5:13 PM

    You will have to send the form to the printer 2 times to print from different trays. I seriously doubt it would be possible to do it otherwise, but you might want to check in the forum specific to forms.

  • Printing the XML Publisher report output  from different trays of printer.

    I am generating the XML Publisher report and the output is in 5 pages and that is sent to the printer
    In the printer there are two trays one tray(tray 1) consists of company watermarked papers and the other tray(tray 2) will be consisting of ordinary papers
    I want to print the first two pages of the report on the papers of first tray and the remaining pages to be printed from another tray consisting of ordinary papers.
    How can i do this in XML Publisher.
    Any response will be appreciated
    Thanks
    Saurav

    Look at the links AJ gave.
    Basically what you will do is create a Data Definition and assign a Data Template to it. Create a (document) Template and assign it to your data definition. You will use the XML Publisher Java API classes to pass parameters to your data template and extract the XML data. Then you will use this in conjunction with your document template and the OAF integration region to present the final output to the user.
    All of these things are in the XML Publisher documentation and Javadocs.

  • Print Check Signature from Printer Flash Card

    Dear all,
      I need to print the signature from the Flash Card on the printer. They won't allow me to upload graphic into SAP system because of security reason.
      How can I find an escape sequence and a character sequence for a print control from HP printer (4350tn)?
      And please provide me an example of SAPscript code to print the signature.
    Thanks very much,
    Chaiphon Pulnitiporn

    First you will have to fin the correct sequence of characters which, when send to printer, print the signature.
    Then call transaction SPAD Spool Administration) to display Spool Administration: Initial Screen. Then click the Full Administration button. Select the Device Types tab and select the printer that will be printing the signature (HPLJ4, for example).
    Select the green check mark after entry of the Device Type to display the Spool Administration: Device Type screen, then click on the Print Controls tab.
    The Print Controls page displays a list of defined print control sequences, each identified by a name. You can create new sequences or modify existing sequences. Let's create a control sequence named <your instruction here>  to define the prefix that will print the signature:
    - Escape Code (hex 1B) usually at the beggining
    - The code for printing the signature
    - An upper case X to mark the end of the command (hex 58) usually
    So by calling the new instruction you will print the signature:
    - simple ABAP - <i>PRINT-CONTROL FUNCTION `<your instruction here>'</i>
    -SAPSCRIPT : <i>/: PRINT-CONTROL <your instruction here></i>
    If you have many signatures, maybe there will a part variable, so you will need two instructions : before and after to use before and after the id of the signature.
    If all printer of the same type don't have flash cards, you have to duplicate the device type and update the copy, then assign the new type to the correct printers.
    Regards

  • Procedure to check data from different tables

    Hi
    I am trying to write a procedure to compare data from a table with another.
    Table 1
    ID Name Dept
    1 ABC Y
    2 DEF Z
    Table 2
    ID Dept
    1 Y
    2 Z
    Table 3
    Name ID
    1 ABC
    2 DEF
    I would like to compare each record data in Table 1 with data from different tables table2,table3 by matching ID,name.... Please help me with how I could start writing a procedure and also spool data that does not match from the table1 with other tables
    thanks
    Edited by: 890563 on Apr 30, 2012 10:34 AM

    Hope below helps you.
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE1 VALUES('123456','testfirst','testlast','testmiddle');
    INSERT INTO TABLE1 VALUES('123457','testfirst1','testlast1','testmiddle1');
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE2 VALUES('123456','testfirst','testlas','testmidd');
    INSERT INTO TABLE2 VALUES('123457','testfirst2','testlast1','testmiddle1');
    SELECT TABLE1.ID,
            -- Match First Name
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE1.FIRST_NAME ELSE NULL END TABLE1_FIRST_NAME,
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE2.FIRST_NAME ELSE NULL END TABLE2_FIRST_NAME,
            -- Match Middle Name
         CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE1.MIDDLE_NAME ELSE NULL END TABLE1_MIDDLE_NAME,
            CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE2.MIDDLE_NAME ELSE NULL END TABLE2_MIDDLE_NAME,
            -- Match Last Name
         CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE1.LAST_NAME ELSE NULL END TABLE1_LAST_NAME,
            CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE2.LAST_NAME ELSE NULL END TABLE2_LAST_NAME
    FROM  TABLE1, TABLE2
    WHERE TABLE1.ID = TABLE2.ID
    ID         TABLE1_FIRST_NAME  TABLE2_FIRST_NAME  TABLE1_MIDDLE_NAME TABLE2_MIDDLE_NAME TABLE1_LAST_NAME   TABLE2_LAST_NAME
    123456     NULL               NULL               testmiddle         testmidd           testlast        testlas
    123457     testfirst1         testfirst2         NULL               NULL               NULL            NULL
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to print check box from smartform

    Hi friends,
    Any body help me ???
    How can we print a check box in a layout from smartform.....

    Hi Shashi,
    You can't directly print a checkbox as such in a smartform. But, there is a workaround.
    Create two GraphicElements (for checked / unchecked). Assigned images to (for tick and untick) them.
    In the conditions tab of GraphicElement enter conditions -
    1. for checked - field = 'X'
    2. for unchecked - field = ' '
    To add images of tick and untick to system, Use transaction SO73.
    Regards,
    Manish Joshi

  • While printing check , need second copy

    while printing check, client asking for another one copy for accounting purpose . but they asked to print one copy with check paper from Tray1 and another one with bond paper from Tray2 . but I couldnt take printout in the sametime 2copies from different trays.please advice in your client place how your managing in this scenario.
    Thanks in advance

    hello
    as far as i know there is no way to print copy in SAP.
    our process is:
    1. RUN F110 by USER1 in the FI department, we define the variant so that USER1 don't print the check.
    2. USER2 in the Treasury department get from USER1 the detail of the: run date and the Identification (from F110).
    3. USER2 run F110 with only option to print the check.
    if you have any question i am ready to answer
    meir

  • How to print different pages of sap script  from diff. trays of printer

    Hi All,
    I have the requirement in SAP script. How to print different pages from different trays in the printer.
    For example  page 1 logo and address has to print from tray-1,
                        page 2 main data print from tray-2,
                        page 3 footer data print from tray-3.
    will appreciate if u come up with solutions asap.
    Thanks in advance.

    Hi,
    May be the links given below might help you,
    SAPScript:Selecting Different Tray in SAPscript
    Print to different output tray in SAPscript/Print Workbench
    Regards,
    Hema.
    Reward points if it is useful.

  • My MG5220 won't print an original 3 page document from rear tray.

    I have only recently had trouble printing original documents from rear tray.  I have completed maintenance ( cleaning), checked paper media, etc.  I have checked page set-up, etc.  I think I am overlooking something that is obvious but I can't see the forest for the trees.  Please advise.  Thanks!

    Hi Kashmie,
    To try and resolve the issue, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the paper not to feed.  Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.  Next, please remove and reseat all of the ink tanks in the printer.  Once all of these steps have been performed, if you still experience difficulty, please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Multiple Copies of Same Page Content from Various Trays

    I use 'gs' to create postscript, and 'setpagedevice' to specify trays.
    I print a single page of content (say the file "f.pdf") on each of six different colors of paper, which are pulled from different trays.   At the moment, I do this by repeating the filename "f.pdf" six times as an arg to 'gs'.  This creates a single postscript file, into which I insert my six 'setpagedevice' commands.
    My 65ppm printer has to re-render the same 'f.dpf' postscript six times, which causes it to only produce about 20ppm.
    Is there a way to pass a NumCopies specification so that each of my 'setpagedevice' commands switches trays to print the exact same rasterized bitmap? In other words, to write a postscript file that rasterizes 'f.pdf' only once, and still makes use of that cached image for each 'setpagedevice'?
    I'm happy to read manuals, but I don't know what technique or feature name(s) I should look for...
    thank you,
    - Randy

    Randy,
    If your original one page ps or eps file was e.g.
    72 720 moveto
    /Helvetica 72 selectfont
    (Hello World) show
    showpage
    Then you can try something like this:
    /MyPage
        72 720 moveto
        /Helvetica 72 selectfont
        (Hello World) show
        showpage
    } def
    and then in paint procedure in the form:
    /PaintProc
        MyPage
    Use setpagedevice to select your tray instead of a page size like in the prior post's example before calling the form. Since the form is the same on each
    page hopefully it will be stored in the form cache and speed things up but you may need to check the cache size.
    Ed

  • Different trays for different transactions

    Hello again,
    we want SAP to print from different trays of the printer, when using different transactions.
    Does anyone of you know, if that is possible? How/Where can I set this?
    Thanks a lot in advance!
    D.

    Hi D,
    Depending on your environment, in Windows you can install the same printer twice - setting up default trays for the two instances separately, so you will have the same printer with tray 1 and tray 2 installed.
    Since they will appear as separate printers in Windows - and therefore SAP, you will be able to assign specific print layouts to each of them - in the PLD toolbar go to Print Layout Designer -> Display Document Properties -> Paper Format -> Printer and choose according to your requirement.
    This way different transactions (in fact print layouts) can print to different trays of the same printer.
    I hope this helps.
    Regards,
    Nat

  • Printer output diferent from Preview output (R6i)

    I have a report (Report Builder 6.0.8.8.3) configured for A4 pages (210mm Width X 297mm Height), portrait. Everything seems well: Main Section properties set, printer driver and paper set (Xerox Docuprint P8e PCL-5e), layout ok. If I print with DESTYPE=Preview output is good, but if I print with DESTYPE=Printer I loose 0.7 inch at the right margin (I'm using the full page width).
    I've tried with other page sizes (8.5" x 11" and 8.5" x 14") and came up with the same problem.
    What can it be? Is it a bug? Is it printer-related?
    Any help os direction for papers will be welcomed.
    Thanks in advance.
    Lums Ortiz - [email protected]

    HI
    I think this would require programming to determine the tray to be used.The problem is that each printer model can have different tray selection commands that are required.Also, if the form is used across multiple areas,each area might have different models.
    However,for a single printer YES,the form would have to be specific to the printer being used.
    Regards
    Chen

Maybe you are looking for