Printing Cheque using EPSON LX-300

Hi Everyone,
Could you please help me with this issue?!
I had implemented the Cheque process but when I am using EPSON LX-300 printer an error occurs. Some numbers and letters are showing up on the begining of the line. I think that this is because of printer configuration.
On the Spool transaction the cheque is nice.
Do you know how I can solve that?
Thanks
Daniel Dorta

hi
set the margin either in the Print out or in the printer configuration.

Similar Messages

Reg: Continuous Printing issue in EPSON LQ-300+II

Dear All,
I'm facing a continuous cheque printing issue with EPSON printer (LQ-300+II).
We've created a new page format for state bank of Mysore cheque (Dimension 231mm width X 92.5mm Height) and assigned that in our sapscript for printing. The cheque is printed using transactoin F-58.
In windows server properties (print setting), our system admin has created a form with above dimension.
My problem, first & second cheques are printed correctly & identically, but from third cheque the amount is printed slowly starting to print up by 0.5mm. After few cheques it is completing coming out of the box and printing few cms up.
We've tried implementing every possible solutions given in the forum and ended in vain.
1) inserted coding in printer initialization.
2) tried to create similiar page format in windows.
Please sugget a way to get out of this continuous printing issue.
Thanks,
Rajan U

The stated length of the form / paper is in error... that's why the output is "moving" up the page... sound like it should have been 93.0 mm height. I would guess that if you carefully measured the placement on check 1 and 2, you would see precisely how much too short the height is....

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

Setting maximum amount to print cheque using transaction F-58

Dear SAP Colleagues
We have a requiement to set the maximum amount of $25M cheque to post and print when using transaction F-58. We have set all our payment terms to have this maximum amount. However the user can still use the transaction F-58 with mount exceng $25M.
Please advise if there is a setting in SAP where we can define the maximum amount for cheque to post and print using transacton F-58.
Regards

Try creating a validation in AP for that transaction code and the amount. I am not sure, but you can test. I don't think there is any place in SAP where you can restrict the amount for a transaction.
Hope this helps.
Shail

Word for Mac print out shrinks using Epson LX 300+

I've tried adjusting the paper size and margin, the result is the same. Tips?
I'm using Word for Mac 2011 14.3.9

I just googled word for mac 2004 and found the requirements "10.2.8 or higher". There were quite a few changes in Snow Leopard, so a lot of applications which still would work with Leopard no longer work with SL. I also checked this site for SL compatibility and it is not even listed:
http://snowleopard.wikidot.com/start
Message was edited by: Barbara Daniels1

Print cheque using F-58 (CALL TRANSACTION)

Hi.
I'm creating a payment using call transaction (F-58). Because of call transaction de system is not creating de cheque. Anyone know how can i do it????
Tks!
Ricardo

Try creating a validation in AP for that transaction code and the amount. I am not sure, but you can test. I don't think there is any place in SAP where you can restrict the amount for a transaction.
Hope this helps.
Shail

Printing Cheque

Hi Guys,
I am printing Cheques using Continous cheque and EPSON LX-300 printer, but when i asked to print a new cheque, the print skips the first cheque.
How can I avoid it?
Thanks
Daniel Dorta

Hi Danial,
Is this problem with EPSON LX-300 printer only? If yes then the printer settings have to changed.
Other wise check:
The form that is attached to the payment method
If using F110 check the print variant
Regards,
Kiran

How to do Arial fonts in EPSON LX-300+II

Arial or Helvetica fonts are added in device type EPESCP9 or EPESCP2 in output device that uses EPSON LX 300 + II. I'm using the INCH7 page format for the check printing. When the check was printed, the output was not Arial; instead it looked like a Roman font. Arial fonts are already in list of printer fonts of EPESCP9 and EPESCP2. Also, the font used in check sapscript is already changed to Arial. When I used SWIN, it printed the Arial font correctly. I can't use SWIN since SWIN is for Windows and not for Linux.
Can anybody help me?

Hi,
In SPAD you need to create the Device type & then the page format should be created for that specific Device type.
Best regards,
Prashant

Dark Prints When Using CS3

have just begun using CS3 10.0.1 on an iMac (using 10.5.2) and am experiencing darker than normal prints.
My setup is as follows:
Color Settings In Photoshop:
RGB: Adobe RGB (1998 (but have now begun using ProPhoto RGB)
CMYK: US Web Coated (SWOP) v2
Gray: Gray Gamma 2.2
Spot: Dot Gain 20%
When printing, I have been using:
Photoshop Colour Management -
Document
Photoshop Manages Colours
A specific printer profile for the Epson paper I use ( downloaded the from Epson website)
Perceptual (Rendering Intent)
For the printer driver (for an Epson R800 printer) I have been selecting Off (No Colour Management) from the Colour Management Tab and I have been adjusting the Print Settings to the paper I have been using.
If there is a bug in CS3 that is causing the darker than normal prints, is there a workaround (such as printing images edited in CS3 in CS)?
Any assistance is appreciated!
Frank

I and some (many?) others have similar problems, for which I have two partial solutions.
To begin, I strongly suspect the printer is suspect. I had an R800 and now use an R1800. I have used the R1800 with Tiger and Leopard, both through several revisions up to the most recent (10.4.11, 10.5.2). I don't recall problems before CS3 (currently 10.0.1) With CS3, I cannot print satisfactorily using Epson printer profiles for glossy and luster paper. I can print to watercolor paper IF use a glossy profile. (It's OK to lie to a possible demented print system.) That said, here are two workarounds.
1) Let the printer manage colors. Heresy, I know. Works well for me with glossy or luster paper and any of 3 choices of printer control-- Epson Std, Epson Vivid, or Adobe 1998. Oddly enough, before I dod workaround #2 below, the Epson control for brightness didn't seem to have any effect. I bumped it up to 3. I've never twiddled the other controls in that panel.
2) This is tedious.
(a)Remove printer drivers using Epson's Uninstall options for your printer in BOTH the present and the preceding versions. Old driver software not removed has been suggested in this forum as a potential problem.
(b) Remove the printer entrie or entries via System Preferences--> Fax&Print, reset the printer system, and throw away any previously downloaded Epson printer software installers.
(c) Run Disk utility, do a safe boot, run disk utilities again. Reboot as normal.
(d) Download a fresh driver from EPson and install it.
(e) Remove PS CS3 preferences. Restart PS while holding down the option key to generate a fresh default preferences file. CAVEAT-- you will lose any custom preferences and any
non-default actions. I am recreating the defaults on the fly, and I was able to reinstall the actions, whose files wee still in place, by double-clicking on each in turn while PS was running.
The outcome? Well, I can now elect to let PS manage colors & turn off Printer color management. I get better prints on luster paper and on glossy paper. The matte printer profiles still flood low-key regions of an image with cyan and/or blue. I'm not done testing other paper surfaces yet.
Three final threads-- (i) paper -- I use Epson, Premier Art, and (!) yes, Staples professional brilliant gloss. Various profiles for these icc or not don't seem to make noticeable difference to my eyes. (Aside-- I don't really believe Epson and other printer makers actually manufacture their own paper, we're buy Epson-branded paper made by who knows whom.)
(ii) Other sometimes helpful sources of info include g ballard's site (Google it). John Nack's blog http://blogs.adobe.com/jnack/, and the Apple ColorSync email chat list.
Also search this forum for Epson, R800, R1800, and Leopard will produce a lot of text and some useful info.
(iii) I rebuilt a 10.4.11 system but saw the same bad results as with 10.5. To me this implicates a bad guy somewhee in the software stream up to and including printer memory.
Apologies for length. Maybe I should just use Marshall Oils like my grandfather did...
--Gene

Problem with character mode printing on epson lx-300

Greetings
I developed a character mode report and is printing fine on the printer lx-300 when I use Reports 6i (Client/Server)
We migrated all the platform to OAS 10G Release2 bu the same report has the following behaviour:
1. The left margin is shift to lthe right about 2 inches.
2. Is printing shrinked and the characters doesn't see well.
The report is a character mode report of (132 columns, 66 lines).
I set the default prt to:
printer "dflt"
height 66
width 132
after page control(L)
return ""
linefeed control(J)
The run parameters are mode=character and desformat=dlft.prt
Anybody has experience using character mode reports on 10g on matrix printers like epson lx-300?
Thanks!

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Crystal report printing using epson dot matrix printer (continouos paper)

Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiff

Check with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

EPSON LX-300+II printer

Hi,
We are implementing ECC6.0 and now we are doing printer configuration. We have EPSON LX-300+II dot matrix printer. And we have created a output device ZLP01 but we haven't found this printer in the device type list. So we have choosen nearest printer KPKS: EPSON Dot-Matrix KS, device class standard printer, Host spool access Method G:Front End Printing with Control Tech., Host Printer _DEFAULT.
But it is printing some junk numbers like f460y2X0y2X0y2X0y2X0y2X0y
So, please help me to configure my printer.
Regards,
Nilesh

Hi Nilesh,
This is SAP Business One forum.
Close this thread and re-post your question to a correct forum
Regards,
Bala

Printing Cheque using EPSON LX-300

Similar Messages

Maybe you are looking for