Printing columnar data on a JTextPane
How can I format and print columnar data like data from a resultset and then formatting it so as to appear in tabular format while using the Document interface derived from a JTextPane. I would like to align data on the columns e.g. centered, left, or right and to retain my styled document instance.
Double post:
http://forum.java.sun.com/thread.jspa?threadID=587019
Similar Messages
-
How can I format and print columnar data like data from a resultset and then formatting it so as to appear in tabular format while using the Document interface derived from a JTextPane. I would like to align data on the columns e.g. centered, left, or right and to retain my styled document instance.
How can I format and print columnar data like data from a resultset and then formatting it so as to appear in tabular format while using the Document interface derived from a JTextPane. I would like to align data on the columns e.g. centered, left, or right and to retain my styled document instance.
-
Can VC print all data in a table?
Hello!
Can VC print all data in a table?
Best Reagrds!
csquare.I write it in this post:
Re: Qusetion about Table View.
It is possible, that you have to use the paging options.
Regards,
Marcel -
How to print text/data in flex 3 using printer???Plz help...
Hi,
plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
private function doPrintContainer():void
var printJob:FlexPrintJob = new FlexPrintJob();
if(printJob.start() != true) return;
try
var mainContainerHeight:int = mainContainer.height;
//Increasing the height of the desired component to be printed.
mainContainer.height = mainContainer.measuredMinHeight;
mainContainer.verticalScrollPolicy = "off";
//Adding the resized Component to our FlexPrintjob and then sending the print request
printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
printJob.send();
//Resizing the component back to normal size
mainContainer.height = mainContainerHeight;
mainContainer.verticalScrollPolicy = "auto";
catch(error:Error)
trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari -
How to print formated data/report on client's printer (Web Application)
Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
Application is web based
Technology used are Java - jsp - servlets
i want functionality like...
when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
Also printer selection dialog should displayed one time when user click on print button/link.
Questions:
1. How i will transfer all data to client (web browser) from the server ??
2. And how i can print that data on user's printer ??
There is requirement (or limitation) that I can not use applet for this purpose.
And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
There is solution like ...
I can use window.print() function of DOM/JavaScript,
but it prints only one page which is displayed on browser.
I don't want to display any page. and want to print all pages.
if any one done or have idea then let me know.
Thanks in Adv.
Shailesh Koradiyathanks linxpda for reply,
we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
if it is possible then let me inform.
Thanks,
Shailesh Koradiya -
Using htp.p for print dynamic data in apex region make my page slow?
Hi, everyone!!! My name is Rafael, and...
I search in the web and in this forum but i can´t find a answer for my doubt.
Using the procedure htp.p for print dynamic data in apex region through on demand process , this will leave my webpage slow to load when the user access?
Example:
For build a menu in my webpage, it´s read a function in the database that returns variable string, so by a demand process this string is obtain and print in a web page using htp.p.
I notice that this practice causes slow to load the data on the page.
This is it...
If someone help me, thanks...
bye and Happy new Year!!!
Edited by: user9518141 on 26/12/2009 17:19Hi,
Try commenting out the function call and print some sample text in the htp.p like htp.p('Hello world..');
I think the function call is probably taking a lot of time .. not htp.p.
I have used htp.p to print out values dynamically in a lot of situations and have not ever come across any performance issues.It could be a problem with the function you are calling.
Thanks,
Rajesh. -
Printing System Date on Report Title
How can I print the system date on the title of report generated by SQL*Plus?
I remember it is possible to include SQL.PNO in the statement TTITLE to print the page number. Is there any variable like SQL.PNO which represent system date?
Previously I've include SYSDATE to the SELECT statement of the report. It is the column named TODAY, with option NOPRINT and NEW_VALUE TT_TODAY, where TT_TODAY is include in TTITLE statement. The problem is: if the SELECT statement returns nothing, TT_TODAY will be blank/Null.
How can I work around with this problem?Dear all,
My colleague told me the way to print System Date on title of SQL*Plus report as followed:
COLUMN today NEW_VALUE tt_today NOPRINT FORMAT A1 TRUNC
TTITLE CENTER tt_today RIGHT SQL.PNO
SET FEEDBACK OFF
SET TERMOUT OFF
SELECT SYSDATE AS today FROM DUAL;
SPOOL RPTFILE
SELECT ....... << to generate report output >> .......
SPOOL OFF
SET TERMOUT ON
SET FEEDBACK ON
It works! The output file contains System Date on each page title.
I don't understand why Oracle didn't implement variable similar to SQL.PNO to represent the System Date. If Oracle is able to create SQL.PNO which can increment on each page break, why not the System Date which remains the same on each page? -
How to print formatted data / report on user's printer in Web Application
Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
application is web based and tech. used are Java - jsp - servlets
now prob. is ...
how i will transfer all data to client (web browser) from the server and how i can print that data on user's printer ...??
there is requirement that I can not use applet for this purpose.
if any one done or have idea then let me know.
thanks
Shailesh KoradiyaHi
Its simple, first of all break ur data in terms of pages. Write the logic in one JSP.
suppose i have jsp PrintReport.jsp , for page 1 url will PrintReport.jsp?page=0 ... so on
get the page parameter in JSP
String page="";
if(request.getParameter("page")!=null)
page=request.getParameter("page");
get the rowcount from the Result and assume records per page is 100
if u have 1000 rows then 10 pages u have to serve
StartRowNumber=page*recordsPerPage
EndRowNumber=StartRowNumber+recordsPerPage
Execute a SQL query , select * from table where rownum between
StartRowNumber and EndRowNumber
Provide google like pageNumbers in ur HTML page
ie 1 2 3 4 5 6 ..10
Regarding printing , Create HTML button called 'print' and add Javascript ' window.print()' on clicking it.
Hope it would solve ur problem
Cheers
Rajendra Bandi -
How to print the date in Horizontal way in query................
Hiu2026u2026
I have created a query using SQVIu2026The output is likeu2026
Zone | Customer Group | Customer Name | Date | Value(Rs)
East | ABC/JPR | ABC pvt ltd | 01.08.2011 | 50,000
West | LMN/Delhi | LMN pvt ltd | 02.08.2011 | 1, 50,000
South | PQR/Haryana | PQR auto sales p l | 03.08.2011 | 1,00,000
My problem is i have to print the date in the format like
Zone | Customer Group | Customer Name | 01.08.2011 | 02.08.2011 | 03.08.11 | 04.08.2011 |..............31.08.2011|
East | ABC/JPR | ABC pvt ltd | 50000 | 150000 | 100000 | | |
Thanks&Regards,
Pranitha.Hi Pranita,
You could try with logic:
CONCATENATE LINES OF itab INTO warea SEPARATED BY '|'.
BR
Dep -
How to print the data in the grid?
Hi all,
I'm new to java. So, I need some helps.
I want to print the data in the grid. Data could be more than one page. But I have no idea how to start writing code.
Please let me know if you know.
Thank you.
DT.Follow this steps.
1- the Grid which you wish to print must locate in a class which implements Printable() interface.
e.g.
import javax.swing.table.*;
import java.awt.print.*;
import javax.infobus.*;
public class myGridControl extends GridControl implements Printable{
// add the following statements in the definition section of your class
int m_maxNumPage =1;
JTable m_table;
TableModel m_tableModel;
ScrollableRowsetAccess myRs;
// add the folowing statemnts in the
//constructor or init method or start method
//(Notice:if you couldn't print, possible
//you didn't put these stetment on the right
//location and one or all of them
//are "null".change the location and make
//sure they are not null when you issue a
//print order)
m_table = new JTable();
m_table = masterGrid.getTable();
m_tableModel = m_table.getModel();
myRs = (ScrollableRowsetAccess)masterGrid.getDataItem();
3- add following methods to your class(myGridControl). just cut and paste.
// Print Methods
public void printData() {
try {
PrinterJob prnJob = PrinterJob.getPrinterJob();
prnJob.setPrintable(this);
if (!prnJob.printDialog())
return;
prnJob.print();
catch (PrinterException e) {
e.printStackTrace();
System.err.println("Printing error: "+e.toString());
public int print(Graphics pg, PageFormat pageFormat,int pageIndex) throws PrinterException {
JLabel m_title=new JLabel("Alexus Report : "+titleName);
if (pageIndex >= m_maxNumPage)
return NO_SUCH_PAGE;
pg.translate((int)pageFormat.getImageableX(),
(int)pageFormat.getImageableY());
int wPage = 0;
int hPage = 0;
if (pageFormat.getOrientation() == pageFormat.PORTRAIT) {
wPage = (int)pageFormat.getImageableWidth();
hPage = (int)pageFormat.getImageableHeight();
else {
wPage = (int)pageFormat.getImageableWidth();
wPage += wPage/2;
hPage = (int)pageFormat.getImageableHeight();
pg.setClip(0,0,wPage,hPage);
int y = 0;
pg.setFont(m_title.getFont());
pg.setColor(Color.black);
Font fn = pg.getFont();
FontMetrics fm = pg.getFontMetrics();
y += fm.getAscent();
pg.drawString(m_title.getText(), 0, y);
y += 20; // space between title and table headers
Font headerFont = m_table.getFont().deriveFont(Font.BOLD);
pg.setFont(headerFont);
fm = pg.getFontMetrics();
TableColumnModel colModel = m_table.getColumnModel();
int nColumns = colModel.getColumnCount();
int x[] = new int[nColumns];
x[0] = 0;
int h = fm.getAscent();
y += h; // add ascent of header font because of baseline
// positioning (see figure 2.10)
int nRow, nCol;
for (nCol=0; nCol<nColumns; nCol++) {
TableColumn tk = colModel.getColumn(nCol);
int width = tk.getWidth();
if (x[nCol] + width > wPage) {
nColumns = nCol;
break;
if (nCol+1<nColumns)
x[nCol+1] = x[nCol] + width;
String title = (String)tk.getIdentifier();
pg.drawString(title, x[nCol], y);
pg.setFont(m_table.getFont());
fm = pg.getFontMetrics();
int header = y;
h = fm.getHeight();
int rowH = Math.max((int)(h*1.5), 10);
int rowPerPage = (hPage-header)/rowH;
m_maxNumPage = Math.max((int)Math.ceil(m_table.getRowCount()/
(double)rowPerPage), 1);
int iniRow = pageIndex*rowPerPage;
int endRow = Math.min(m_table.getRowCount(),
iniRow+rowPerPage);
// take an array to store columns header
String colNames[] = new String[nColumns];
for (nCol=0; nCol<nColumns; nCol++) {
colNames[nCol] = myRs.getColumnName(nCol+1).toString();
try{
for (nRow=iniRow; nRow<endRow; nRow++) {
y += h;
// set RowSet on the specific row
myRs.absolute(nRow+1);
for (nCol=0; nCol<nColumns; nCol++) {
/* the next 3 lines are old code
int col = m_table.getColumnModel().getColumn(nCol).getModelIndex();
Object obj = m_tableModel.getValueAt(nRow, col);
String str = obj.toString();
// take the values column by columns
ImmediateAccess ia = (ImmediateAccess)myRs.getColumnItem(colNames[nCol]);
String str = ia.getValueAsString();
if (str.equals("")) str=" ";
/* this if is usefull if we'd like to have coloring in printing
if (obj instanceof ColorData)
pg.setColor(((ColorData)obj).m_color);
else
pg.setColor(Color.black);
pg.drawString(str, x[nCol], y);
}catch(Exception e){
e.printStackTrace();
System.gc();
return PAGE_EXISTS;
public void printData() {
try {
PrinterJob prnJob = PrinterJob.getPrinterJob();
prnJob.setPrintable(this);
if (!prnJob.printDialog())
return;
prnJob.print();
catch (PrinterException e) {
e.printStackTrace();
System.err.println("Printing error: "+e.toString());
public int print(Graphics pg, PageFormat pageFormat,int pageIndex) throws PrinterException {
JLabel m_title=new JLabel("Alexus Report : "+titleName);
if (pageIndex >= m_maxNumPage)
return NO_SUCH_PAGE;
pg.translate((int)pageFormat.getImageableX(),
(int)pageFormat.getImageableY());
int wPage = 0;
int hPage = 0;
if (pageFormat.getOrientation() == pageFormat.PORTRAIT) {
wPage = (int)pageFormat.getImageableWidth();
hPage = (int)pageFormat.getImageableHeight();
else {
wPage = (int)pageFormat.getImageableWidth();
wPage += wPage/2;
hPage = (int)pageFormat.getImageableHeight();
pg.setClip(0,0,wPage,hPage);
int y = 0;
pg.setFont(m_title.getFont());
pg.setColor(Color.black);
Font fn = pg.getFont();
FontMetrics fm = pg.getFontMetrics();
y += fm.getAscent();
pg.drawString(m_title.getText(), 0, y);
y += 20; // space between title and table headers
Font headerFont = m_table.getFont().deriveFont(Font.BOLD);
pg.setFont(headerFont);
fm = pg.getFontMetrics();
TableColumnModel colModel = m_table.getColumnModel();
int nColumns = colModel.getColumnCount();
int x[] = new int[nColumns];
x[0] = 0;
int h = fm.getAscent();
y += h; // add ascent of header font because of baseline
// positioning (see figure 2.10)
int nRow, nCol;
for (nCol=0; nCol<nColumns; nCol++) {
TableColumn tk = colModel.getColumn(nCol);
int width = tk.getWidth();
if (x[nCol] + width > wPage) {
nColumns = nCol;
break;
if (nCol+1<nColumns)
x[nCol+1] = x[nCol] + width;
String title = (String)tk.getIdentifier();
pg.drawString(title, x[nCol], y);
pg.setFont(m_table.getFont());
fm = pg.getFontMetrics();
int header = y;
h = fm.getHeight();
int rowH = Math.max((int)(h*1.5), 10);
int rowPerPage = (hPage-header)/rowH;
m_maxNumPage = Math.max((int)Math.ceil(m_table.getRowCount()/
(double)rowPerPage), 1);
int iniRow = pageIndex*rowPerPage;
int endRow = Math.min(m_table.getRowCount(),
iniRow+rowPerPage);
// take an array to store columns header
String colNames[] = new String[nColumns];
for (nCol=0; nCol<nColumns; nCol++) {
colNames[nCol] = myRs.getColumnName(nCol+1).toString();
try{
for (nRow=iniRow; nRow<endRow; nRow++) {
y += h;
// set RowSet on the specific row
myRs.absolute(nRow+1);
for (nCol=0; nCol<nColumns; nCol++) {
/* the next 3 lines are old code
int col = m_table.getColumnModel().getColumn(nCol).getModelIndex();
Object obj = m_tableModel.getValueAt(nRow, col);
String str = obj.toString();
// take the values column by columns
ImmediateAccess ia = (ImmediateAccess)myRs.getColumnItem(colNames[nCol]);
String str = ia.getValueAsString();
if (str.equals("")) str=" ";
/* this if is usefull if we'd like to have coloring in printing
if (obj instanceof ColorData)
pg.setColor(((ColorData)obj).m_color);
else
pg.setColor(Color.black);
pg.drawString(str, x[nCol], y);
}catch(Exception e){
e.printStackTrace();
System.gc();
return PAGE_EXISTS;
4- execute printData() method to print.
e.g. myGridControl.printData();
let me know if you still cannot print.
Ali -
How to print all data in a table?
Hello!
I am doing report with VC. Now I want to print data ,The system action "print" can not print all data,only a page in the table can be printed. Are there any ways to finishe the print function,Can you help me?
Thank you very much!See this how to guide I put together:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123 -
How can I print the DATE in the Header/Footer but NOT the TIME?
I know how use page set-up to change the headers and footers. Firefox doesn't give me the choice of printing just the DATE rather than the DATE/TIME. I tried Custom Date and it printed "Date", and not the date. I tried &Date and it print the Date & Time.
Is there a way to print just the date?
Sign me
Midnight PrinterYou want to print them on their own? Can't be done. WIth the photo? Install this
http://www.iborderfx.com/iborderfx/ -
My Page has data more than one page, it has verticle scroll bar to view all data .
I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
This works fine with Internet Explorer 6+ and Google Chrome.Does the entire webpage appear in Print Preview? <br />
File > Print Preview -
Is there any way to print the data inside the Notes field of MIR6 Report
Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.
-
How to print the data Dynamically in smartforms
Hi Experts,
I need to print the data dynamically in different windows on the same page.For example in the first window 25 records,2nd window 25 records and 3rd window 25 records.I need it dynamically.How to achieve this?Hi,
If you have an internal table which fetches the data... Then you can have table in each window and in the data tab give from row and to row values to display how many records and from where to where you want to display.
Regards,
-Sandeep
Maybe you are looking for
-
Can't connect MacBook to a network behind D-link router
MacBook Mac OS X (10.4.8) I am not able to access shared folders or networks behind a D-link DI-524 router from my MacBook but can access the networks/shared folders from PCs. From my MacBook I can connect wirelessly to the internet and access other
-
Recovery Point Status Report Shows Only One Day
Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
-
My adobe creative cloud single app cancellation did not go through!
Early last month I called to cancel my Adobe Creative Cloud single application account (Acrobat) and was told that the account was cancelled. Then, a couple days ago I saw on my bank statement that I am still being charged for the account. I can't ge
-
Hello, It seems there's a method of chdir ( ) to change the current directory in Java, but didnot work for me. Is there any better way to get around it? I mean, is it possible to change directory in run-time? if I put an argument on the command line
-
Unable to install ACR9 with Photoshop CC
Hi, I'm a member of the Photography program, and since the release last week of ACR9, i have not been able to install it correctly. I always get the error message "Download is corrupted. Please download again". But I just can't find how to "download