Printing custom size prints

I am having trouble printing custom size photos on regular size paper. I use the custom scale setting in the layout dialog box. However, the result does not match the requested size in the preview window and it does not print the requested size. For example I would like to scale a photo to print 4x10 on a 8/12X11 sheet of paper. When I custom scale to 4x10 the result is 4 high but 7.5 wide. Any help would be appreciated? I'm printing on an HP 9180.

Have you cropped the photo to your desired 4x10 aspect ratio? If you do that, then the only printing part of the photo is that portion you've chosen in your crop. Then in the print dialog, you can tell it to print to 8.5x11 and set the margins there to .5 inch in order for it to scale to 10". Or have you done all this already?

Similar Messages

Printing custom size prints with Epson 1430 printer

We have been trying to print photos slightly larger then standard sizes. not sure what the the paper sizes are A3 & A4

As an experiment, please try the following;
Open the Editor in Expert tab
Go to File>New>Blank file. Set w=10.5", h=8", resolution 240 px/in, background: white. OK
Use the brush tool to make a few scribbles on this canvas
Go to File>Print. Select individual print, paper size letter size or 8.5x11"
When you try to print this, do you still get the error message?

I cant print custom sizes in photoshop CS3. Please help

I am on my Imac G4 using mac os x 10.4.11. I know that it is not my printer that is the problem. I have been told that I should upgrade to 10.5.x, I have also purchased a new CS3 because I dont have the original copy so I cant reinstall it. The trouble that I am having is that when I try to print custom sizes, the printer defaults back to 8.5x11. Only in photoshop does it do this. Has anyone else had this problem or know what I can do to fix it? I would really appreciate it. Thank you for your time. I will check back until this is resolved.

Russell,
Because your screen shots (they look like you actually shot them with a camera! ) don't show the whole Print Preview panel, I'm not sure at what stage you're losing the paper size, but it's pretty clear that by the time you invoke the printer driver, it's royally screwed up.
At this point I would:
• delete the printer from your printer list (in the Printer Setup Utility),
• re-install a fresh copy of the latest printer driver from the Epson site,
• then add the printer back in.
This is the kind of consistency you should be seeing (Command Click on each thumbnail to open the full-size image in a new web browser tab) [NOTE: this is CS4 running in Tiger 10.4.11):

Can't custome size print photos using iPhotos app

can't custome size print photos from iPad using iPhoto app and can't find and download new Photos app to use with iOS 8.1.

I also found this issue when trying to use the Coupons app; we've validated a problem and are working to correct it.
Thanks for your patience.
Although I am an HP employee, I am speaking for myself and not for HP

Printing custom size envelopes under Yosemite

Upgraded to Yosemite on MacPro. HP8600 no longer prints custom size envelopes. Seems like printer keeps expecting 11 inch long paper size even though the envelope is specified as 5.750 height. Never had a problem before OS upgrade. Need to print envelopes for Christmas cards.

Hey @25172 ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are having issues when trying to print an envelope but the printer is trying to print on an 11' piece of paper. You used to be able to change the settings and it would work, now it simply isn't following your instruction.
Have you done all the apple updates?
Did you uninstall and reinstall the software for the printer since the update in OS?
Are you experiencing any other issues when it comes to setting related tools with the printer software on 10.10?
Look forward to hearing back from you! Have a great day.
I worked for HP.

Printing Custom Sizes

Is there any way that this printer will print Custom Sizes?

Hello , Thanks for posting in the HP Forums, and welcome!I hope you have a pleasant experience here. I'd like to help you with the issues you are having setting customer paper sizes in Windows XP for your HP ENVY 4500 e-All-in-One printer. According to the information in the printer's specifications, the printer only supports customized paper sizes on a Mac operating system, and only with the following dimensions:76 to 216 mm (3.5 to 8.5 in) wide and 127 to 356 mm (5.0 to 14.0 in) long-Source That being said, you are more than welcome to try setting up a custom paper size on your computer using these steps:How to create a custom paper size in Windows XP Hope this helps, Best of luck!

HELP! i have a photosmart Premium all in one printer C309a i can't seem to print custom size papers

I have tried all of the suggestions on this post for similar issues, changing the custom size on teh printer folder, the application, the white space within the printer preferences >server nothing works.. can someone please HELP i need to print 5 x7 or any other custom paper size i wish for that matter, had i know this issue i would probably not have purchased this printer

What program are you printing from?
The C309a 5x7 is a standard paper size.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro

I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus. I'm using a Macbook Pro running Yosemite.
I would like to print on a card stock that is 4.5 in x 13.5 in. I have tried under Page Setup to create a custom size under Manage Custom sizes, however, I'm hitting a brick wall. The printer gets the job but can not feed the paper. I've also tried to set my default paper size under my System Preferences/Printers and Scanners to be this size...still not working.
Please help!

Hi @klinecard
It is important to ensure the paper size you are selecting is a supported size, and make sure the weight is supported too.
Printer Specifications for the HP Officejet Pro 8600 e-All-in-One Series Printer Series
Please look under paper handling.
If your desired size and weight is supported, you might find the following helpful; Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X
Truthfully, since you are not getting an error message, I suspect you have correctly setup the custom size, this issue is most likely the printers inability to feed the paper you are using.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Need help ordering custom size prints in iphoto....

I don't know how to order custom size photos? After I edit photo in constrain tab and type the size i need it doesn't show that available size in kodak menu. Only standard sizes show up like 3x5, 4x6 etc... I need various sizes like 4 3/4 x 4 3/4 for example.
iMac 1.9 GHz Power PC G5 Mac OS X (10.4.4)

HI Plexi,
As far as I know, there are only the standard sizes available for prints.
You will have to print the custom sizes with your printer.
thanks - I'll give your suggestion a try and let you know how it turns out.
iMac 1.9 GHz Power PC G5 Mac OS X (10.4.4)

Problem printing custom size document

I am trying to print a custom size document (4.4"x7.2") that I created in Microsoft Word. I have set the Page size in Word, tried to create a custom size page in my Printer, and am unable to select this paper size in the properties of my printer (using the control panel). I am at a loss at how to eliminate the "Paper Mismatch" error. Any assistance would be greatly appreciated. (I have two other size papers I need to generate documents for as well...4.4"x6.2" and 4.4"x8.2")
Thanks!

kathyfh
Welcome to the HP Community Forum.
I doubt I will get any thanks for this; some days are just like that. Smiling.
While there are several instances where the Specification Sheet is actually in error and Windows does support Custom sizes for some printer models in a similar printer class, I do believe that in the case of THIS printer model, the specs are correct: Only Mac OS supports Custom paper sizes.
More simply said: You cannot get there from here.
You are likely stuck with the paper sizes supported by the printer as specified in that Spec sheet.
I could not find the necessary file Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X for YOUR printer model that one would expect to see in the How-to Support pages if the "Custom" paper sizes are supported for Windows.
I could be wrong -- I have been wrong before. I do not mind being wrong if it means you get what you need.
If you had something even close to what is allowed, you might be able to select something from the list, adjust the paper in the printer and try to get away with it by adjusting the Printing Preferences.
Printing Preferences
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

ID CS5.5 Mac - Trouble printing custom size 13x21 transparency

I am trying to print a positive transparency for a screen print. The document is 13x21. I have a 13 wide transparency roll from which I have cut a 21" piece. I'm printing to an EPSON 1400.
I cannot get the file to output to this szie. It cuts off the image within in 8.5x11 boundary every time.
I have:
- set a custom size in the print dialog
- clicked Page Setup in the print dialog and set the custom size there as well, ignoring the warning about it not being the ID print dialog
- the preview in the dialog will look perfectly oriented to the correct size in the little thumbnail
- I have tried everything I can think of to try and get the output sizes in sync and correct
- I switched to PDF to try that, fail again
Is there anyone that can help with some step by step of a process that will work?
Adobe ID CS5.5, EPSON Stylus Photo 1400, Mac Lion 10.7.5
I just can't comprehend how this could be so difficult and unintuitive. Any insight would be freaking wonderul.

Wow! Sudden serendipitous conclusion to this insanely frustrating issue.
I had found information that the EPSON 1400 should be able to print 44" long output by default. I was searching specifically to find folks that had printed large or panoramic imagery and stumbled onto a UK photography site where a person has mentioned he'd written software that would allow this printer to even print beyond 44". That sounded great.
BUT, the last post on the thread a guy mentioned how he was able to print up to 44" to an EPSON 1400 with ease. The solution, he said, was that the WIDTH of the print area in the page setup must be LESS THAN 13". Why? No explanation.
So I reset my custom size to 12.5x21 inches and BAM! First attempt from InDesign printed successfully. I can work with the margin.
Anyway, in case anyone else runs into this issue this works. Here is a link to the 2009 post that mentions this as well as info regarding printing longer than 44".
This one is solved.

Help Printing Custom Size on HP8600

Hello, I am trying to print on 6x6 paper using my HP8600. How do I do this? I have set the custom size on the word document but the printer is saying that I haven't set the size. I am using a mac 10.9. Please help. Thank you!

Hi cpaul8814,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are attempting to change the paper size when printing 6x6 from your Mac.
Please click on the link that I have provided that explains Mac OS X: Printing to custom or special paper.
If you still have questions, please feel free to write back.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can't print custom size on Mac os 10.3.9.

Recently set up my new Epson 1400 printer but find it doesn't want to print any custom sizes.
Thought it was a printer error but was told that it may be something to do with the mac/program i am using. I'm working on Adobe Illustrator CS2... when i go to print then page set up I can set up the custom size needed ( 30cm-80cm ) on the untitled option, thinking all is going well i look on the print preview it looks exactly how i want it set up ready to go but it will only print Super A3 size even though i have told it not to. A little look closer on the main print page i can see that although the measurements are stored in there, they are not highlighted and neither is the custom button, i'm sure this is the reason why i can't get it to print the longer length needed, can anyone help me, its driving me mad???? thanks.

I'm using Tiger, but it may be the same in Panther.
Open the Page Setup window. In the *Format for* block there may be two choices available by clicking the arrows : Any Printer or your Epson. Select your Epson & you may have more choices for sizes.
 Cheers, Tom

How to print custom size invitation, 4.6875" x 6.8125"

how do you print custom sized paper on the 8500A....been trying for hours now....paper size is 4.6875" x 6.8125"

Hi,
Please refer the link below to know how to print wallet size photos.
http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/wallet-sized-p...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Problem printing custom size 3.5 in x 5 in from InDesign to Canon i9900

I am working on a small project where I need to print a custom size. The cards are 3.5 in x 5 in. I set up a custom size of paper in InDesign CS3, but every time I print to my Canon i9900, I get only a small bit of the design in the upper left hand corner as if my paper size is set to 8.5 x 11. I have tried everything to get it to print correctly. Also, how do I set the paper for borderless printing? It seems that it still has a margin when my printer prints borderless. This seems like if would be elementary to me so I am a bit frustrated that I can't figure it out.

My experience is with CS2 on OS 10.3.9 and 10.4.11, so this may have changed in CS3, or 10.5....
Setup a custom paper size for your printer.
This can be accessed from within the InDesign Print window.
File > Print
Select your printer from the
Printer: pulldown menu (if not already selected)
Click
Page Setup... at the bottom left
Click
Settings and then select
Custom Paper Size from the list of options
Click
New, name the style, define the paper size and printable margins, and save it.
Click OK to exit the page setup.
In the InDesign Print Window, Click on
Page Setup... again
Select
Your New Paper Size in the Page Setup
Paper Size: pulldown, then click OK.
InDesign Print window
Setup should reflect the new page size and list the paper size as "Defined by Driver"
If your document page size is the same as your paper size, then the preview in the lower left should reflect that.
HTH
-mt

Printing custom size prints

Similar Messages

Maybe you are looking for