Printing dark black line using lbp2900b
Hi iam facing problem with my canon laser printer lbp2900b...
It is printing dark line on left side of page ..i could not understand what is problem in it i cleaned everything but still it prints like that ...
I have uploaded the sample print out. Could any one guide me to fix this issue
http://postimg.org/image/klxckvjj1/
The mfc-8460N is a Brother product, you may have better results looking on the Brother support site.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?
What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down? -
HP 3800 Color LJ Prints 2 black lines. Pic Included
Hi,
I have a HP Color LaserJet 3800. Since last summer it has been printing 2 black horizontal lines across every page. They are always in the same spot, so I'm thinking it is just something that needs to get cleaned and have ruled out the cartridges. (They have all been replaced multiple times since the issue first started). This happends with and without using the duplexer.
I took out the fuser? I think that's what it's called from under the front cover (It was really hot) and cleaned it with a moist papertowl, but that did not make any difference.
Any suggestions on what to clean or where the parts are located? I'm a noob when it comes to working on printers, so a step by step/diagram/pictures will be the best way to explain,
Here is a picture of what the pages look like, I have circled the black lines:Scratch that, I looked at the manual and found how to open a part to fix a paper jam. There were two rollers in there that fit perfectly with the lines. I cleaned them up and now no more black lines.
Fyi, to get at the rollers I had to open the front of the printer, then on the bottom of the inside are 2 green tabs. I pressed them and lifted up the plastic piece to reveal these rollers. -
Officejet 6310 prints solid black line instead of text.
Good day. My officejet 6310 has started printing a 3/8" solid black line instead of text. I've replaced both color and black cartridges. I've also run align and clean cartridges. Does anyone have helpful suggestions?
This type of result is often due to errors in the HP printer drivers. Several things can be tried. Sometimes, using a tested driver for an older, but compatible printer will do the job. A lot of folks used the use the HPLJ2 driver even with HPLJ3 and 4 systems. Another option is to try to print as a graphic. At this point, I can only suggest playing around with things. A lot of folks like the graphic driver aspect instead.
You might also consider printing to the printer in a PS mode rather than PCL if that option is available.
I am only suggesting things I have seen tried by various folks. I don't have a good explanation. -
Hi there, I have a Brother 7820N all-in-one printing with Black line
Hi there,
I have Brother all-in-one that just recently started generating copies with several black lines, on the right side of the page, about 1 inch from the margin.
This happened a few years ago I was able to contact Brother support, by phone, they answered the call and guided me through the process to eliminate the problem. I can not get any phone numbers for Brother Customer Service any more and the copies just look terrible.
Can anyone walk me through how to eliminiate this problem?
thanks!
LauraOpen System Preferences > Print & Scan then select the Print tab then click Open Print Queue
Delete all jobs from the print queue
Restart your Mac and restart the printer.
See if that made a difference.
If not, might be corrupted print preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.print.PrintingPrefs.plist
Click Go then move the com.apple.print.PrintingPrefs.plist file to the Trash.
Try printing.
message edited by: cs -
HP2055 prints solid black lines how do I clear this?
When printing to HP2055 any html web page results in output looking like redaction (thick black lines running entire width of page - some have texture but mostly solid black). Does not happen with any other printer. Replaced drivers. Deleted and reinstalled Firefox. Wiped profiles folder under /local. problem persists. Can print other apps fine such as WORD. only happens with Firefox to 2055.
Check print margins.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary. -
I have purchased Photoshop Elements 6.0 for Mac
I am printing photos on a epson artisan 700 using Photoshop Elements 6.0. I am getting black vertical lines separated by 1 inch across the photo. If I switch from portrait to landscape the photo rotates but not the lines. Cleaning the nozzles made the lines more pronounced. I do not get the lines when I print directly from the printer via the scanner. I also do not get lines when I print with Iphoto (came with my computer) or Canon Imagebrowser (came with camera) or printing documents from Word or Excel. Is Phototshop the problem? I am using Epson ink and paper. I also get the problem with GIMP. Epson tells me they do not support GIMP and that IPhoto uses Epson software.
I had the same problem with Elements 4.0.
Others have had this issue but never posted a solution on a forum. Thoughts?
Operating System: Mac OS X (v10.5.7) on a MacMini 2 GHz Intel Core 2 Duo
Printer model / driver version: artisan 700 / 6.36
Scanner / driver version: artisan 700 / 3.45AI do not have the answer but I do have the same issue with PSE 6. I have a Canon i9100 and have changed out the print head twice because it will not print in color from PSE 6.
The information I really want to share is we changed the paper type and it will now print in color but we have lines just like you stated evenly spaced across the photo. After much though we determined the lines might be caused by the way the printer roller pulled the paper through. We had photo paper in and we had to lie to the printer and tell it we were using plain paper to get it to print in color.
Fortunately, I have several printers, but the Canon does large format and great color. Check your paper type settings on the printer and software on the wild chance maybe that could help. I will post more if we can ever figure out how to fix it. D -
Black goo under black cartridge. printer says Print cartridge missing or not detected Have fiddled with cartridges to make it print sometimes, now mostly won't print.
It is normal for there to be ink in the service station area where the printheads are parked when not printing. It is not necessary or desirable to clean this area.
Please read this post then provide some details. What printer model? What operating system?
Cleaning the cartridge contacts as shown in the document here may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Black line on right side of paper while printing on laserjet 1018
WHILE PRINTING DARK BLACK LINE IS APPEARING ON RIGHT SIDE OF PAPER.
It is time for maintenance on your printer. Perform an alignment.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Reader X prints black line across page 1
Just started using Adobe Reader X, which I really like. However, it will not print properly, and puts a couple dark black lines across the page.
Any help would be appreciated.Use the forum for Adobe Reader.
-
How to print new line using DBMS_OUTPUT package
Hi,
I am trying to print a new line using DBMS_OUTPUT package. but it do not print the new line.
set serveroutput on size 200000
set feedback on
BEGIN
DBMS_OUTPUT.PUT_LINE('First Line');
DBMS_OUTPUT.PUT_LINE('');
DBMS_OUTPUT.PUT_LINE('Second Line');
END;
I expect following output ...
First Line
Second Line
but i got following output....
First Line
Second Line
why DBMS_OUTPUT.PUT_LINE( '); is not printing a new line ?You can try the following:
SQL> ED
Wrote file afiedt.buf
1 BEGIN
2 DBMS_OUTPUT.PUT('ONE LINE...');
3 DBMS_OUTPUT.PUT('SECOND LINE...');
4 DBMS_OUTPUT.NEW_LINE;
5 DBMS_OUTPUT.PUT_LINE('THIRD LINE WITH NEW LINE...');
6 DBMS_OUTPUT.PUT('TEST');
7 DBMS_OUTPUT.NEW_LINE;
8 DBMS_OUTPUT.PUT_LINE('FOURTH LINE'||CHR(10)||'EXAMPLE');
9 DBMS_OUTPUT.PUT_LINE(CHR(10));
10 DBMS_OUTPUT.PUT_LINE('FIFTH LINE');
11* END;
SQL> /
ONE LINE...SECOND LINE...
THIRD LINE WITH NEW LINE...
TEST
FOURTH LINE
EXAMPLE
FIFTH LINE
PL/SQL procedure successfully completed.Documentation:
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_output.htm#i1000062 -
Printing blank lines using plsql
Hi,
I am trying to print a blank line using plsql can anyone help me on this
eg
Employee Report
(a blank line here)
I am not able to print a blank line where I have written (a blank line).
Chiranjibdbms_output is trimming blanks, therefore you need to use some other non-visible character, e.g.
SQL> begin
2 dbms_output.put_line('Employee Report');
3 dbms_output.put_line('***************************');
4 dbms_output.put_line(chr(255));
5 dbms_output.put_line('*****************************');
6 end;
7 /
Employee Report
PL/SQL procedure successfully completed.
SQL> -
Moving from Corel Ventura into InDesign CS4 - prints dark
My company has been using Corel Ventura for years, up to version 10. We are now switching in InDesign CS4, but everything is printing dark. We use it to publish black & white manuals, including some photos & vector art.
Ventura had an essentially unmanaged color workflow - everything was set to generic - i.e. - "Generic RGB" & "Generic CMYK"
In Indesign, currently we are using "North American General Purpose 2". The files are printed to a postscript file in InDesign. Then made into a PDF via Distiller. The settings for the PS file & Distiller we are using came from LightingSource.com.
I was assuming that the problem came up in the creation of the PS file - under Color Handling - it is set to "Let InDesign Determine Colors". So I took the other option & used "Let PS printer determine colors" The pages print lighter now, but they are actually too light. I'm not sure what to try next, given that any direct alteration of the printer setup is out of the question.
Any help would be great!!!
Lighting Source Settings - http://lightningsource.com/ops/files/premedia/PSsettingsINDcs4_PC_int.pdfNot knowing more, this is a possible solution if you have Photoshop:
1. In Photoshop with no documents open: Edit Color Settings. By CMYK, Custom CMYK. Black Generation "Maximum"
2. Hit OK, but NOT to the whole Color Settings dialog, just the Custom CMYK dialog. Again in the CMYK pull down, "Save CMYK" Put the profile in your Color Sync folder where InDesign will recognize it. After you save it CANCEL. You don't really want to alter your Photoshop color settings, you just want to create the Max Black Generation profile
3. In InDesign. Create a top most layer on master page. Create a white box to fill the whole page. Set Blend Mode to "Color" Lock the layer.
4. Change the transparency blend space to RGB (Under Edit)
5. Assign the new Max Black CMYK profile to the ID document (Edit: Assign Profile)
6. Check with Separations Preview, you should have K channel only
7. Export PDF/X1a. By Output: Destination: "Document CMYK." You must flatten transparency when you output PDF, and X-1a will do this. The PDF result will be black and white, K channel only. Verify in Acrobat.
This process converts an all color InDesign document to K only CMYK. Dot Gain will be standard 20% but can be changed in step 1 when you create the custom CMYK.
Any grayscale images placed should not be affected by this workflow.
This process is the closest thing I know of to grayscale color management in InDesign. -
Black line down middle of copies
We have a HP 6480 all in one that prints fine but when we make copies it prints a black line down th middle of the copy? I have cleaned the glass and rollers outside and in. what else can I do??
Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Printing Dark Area in smartforms
Hi All,
I am having problem with printing graphics in Smartform. In preview it is okay.. But when I print it ..it is just printing Dark black area. I am expereincing same problem with Table Hedings. Please let me know ..What could be the error.
Thanks in Advance.
Good Wishes
Venkat Reddyhi,
try this out...
Go to transaction SE78.
SAPSCRIPT GRAPHICS --> STORED ON DOCUMENT SERVER --> GRAPHICS --> BMAP
Enter the name of the graphics file on the right side and Go to the menu GRAPHIC --> IMPORT.
OR
RUN THE PROGRAM RSTXLDMC FOR UPLOADING THE IMAGE AND THEN IN THE SCRIPT GIVE
:/ INCLUDE ZLOGO OBJECT TEXT ID ST LANGUAGE EN.
HOPE THIS HELPS,
THANKS,
PRIYA.
Maybe you are looking for
-
Apple TV Home Sharing no longer working
I have a friend who is looking for help Here is his problem: "I've had the 2nd generation Apple TV since October when it was released and it has worked fine until I recently changed my Apple User Name (email address). After changing my user name my
-
Condition type has to executed only when other condition type is availabl
Scenario: We have two freight condition types YHD1 & YHD6. This YHD6 condition type is a Percentage type calculation and dependent of YHD1 value, for example YHD1: 30 EUR then the condition value is 30 EUR YHD6: 10 % then the condition value is 3 EU
-
Novice: how do I determine which OS version I'm on?
How do I determine which OS version is on my iMac?
-
Hi, I need to show 3 moving dots (indicating some task is going on) at the end of a label. Its in general, showing first dot, then 2 and then 3 and again back to one dot. How can I do this? Is this something like having a label and showing one dot in
-
Trapping error in stored procedure
Hi all, I forms 6i application development, i mostly called backend procedure ( Stored procedure ). problem is how can i trap error which occured in procedure in my Oracle forms application. Tell me different methods to solve this problem I'am workin