Printing Document w/ both portrait and landscape pages

After some searching, I was able to create PDF forms with LiveCycle that had a mix of portrait and landscape content.
However, when I go to print the document from Acrobat Professional 8.0, it prints the landscape pages in portrait mode, thus cutting off the right side of the page.
When printing on computers with only Acrobat Reader, the pages all print properly. Is there a way to fix this?

If you just want a page the same size as the rest of the report but with the text printed sideways, you can do that in Pages.
If you want a fold out page (2 sheets wide) then you will have to make a second document for the wider sheet and, after skipping a page in the original, manually insert it after printing.
Alternatively the material can be scaled down to fit.
Hopefully in Pages '10 we will get spreads.
…as well as real color management, crop marks, spot color, slugs, direct selection tool, ability to select objects under other objects, a usable drawing tool, object library, user created shapes, convert text to outline…

Similar Messages

  • How do I convert a FrameMaker file containing both Portrait and Landscape pages into PDF?

    I have recently converted to FrameMaker 9 and Acrobat 9. In the FrameMaker manual I am creating, most of the pages have Portait orientation, but some have Landscape orientation. However, when I convert the manual to PDF using Acrobat Distiller, the Landscape pages become Portrait. This wasn't a problem when I converted the manual into PDF in previous versions of Acrobat Distiller, it appeared after I installed Acrobat 9. In other words, the FrameMaker file has worked before. I have also tried this on three different computers to make sure the computer is not the problem. Does anybody have any ideas that I could try to make this work?

    Jorunn, did you ever resolve this problem? If not, I've got a solution for you.
    In FrameMaker, select the book you want to create a PDF of, click File > Print, and select Adobe PDF as your printer.
    Click Properties and make sure you have the selections you want.
    Back on the Print Setup dialog, leave the Paper and Orientation as both Letter and Portrait respectively.
    On the Print Book dialog, select Print to File and browse to the correct location. Make certain to save this as a PostScript file (name.ps) and at the Safe Book As field, you want Single File selected.
    Again on the Print Book dialog, click the checkbox for Generate Adobe Data and click PDF Setup. On the PDF Setup for Selected Files dialog, at the PDF Job Options, select Press Quality or make the appropriate choices for your situation for Settings, Bookmarks, Tags, and Links.
    With Adobe Distiller open, File > Open and browse to the .ps file you indicated earlier. Also verify your Default Settings for the PDF are correct. When Distiller is finished, you can double-click the PDF file to open it and check that your portrait and landscape pages show correctly.

  • In Pages, is there a way to have both portrait and landscape pages within the same document?

    Question: In Pages, is there a way to change the orientation within the same document so that one page is portrait and the next page is landscape, for example?

    Hi Vicki,
    You can rotate in Preview. See this discussion:
    Re: rotate second page so will print as booklet
    Regards,
    Ian.

  • How do I export from PDF to Word when PDF has both portrait and landscape pages in it?

    Most of the pdf is in portrait but a few are in landscape in the middle of the document and it totally screws up the rest of the document. Help! AND the portrait page size is 8.27 x 11/69.

    Looks like you have A4 pages. I would copy the PDF and then rotate the landscape pages (or portrait) individually (use the tools, not the view rotation) and then do the save to DOC or DOCX. That might do what you want. I would have expected it to notice the orientation, but I guess not. You did not mention the version of Acrobat. If you have not done the updates, you may want to do those first. Your issue may have been address with the updates.

  • Portrait and landscape pages in same ID document?

    I'm using InDesign in CS4 and am definitely not an expert user.  This may seem odd, but I have a need to produce a document that contains both portrait and landscape oriented pages but I would rather rotate the page 90° to the right rather than rotate the content 90° to the left so that I am not craning my neck while working on the content. Is this possible?  If so, how?  Thank you in advance for an assist.

    In the pages panel, choose Rotate Spread View from the panel menu.

  • When Pages will support portrait and landscape page orientation in the same document?

    When Pages will finnaly support portrait and landscape page orientation in the same document?

    Only Apple would know, and it isn't telling.
    Peter

  • How to design an iPhone app that uses both Portrait and Landscape in Flash CS6

    So I have created an App that has a different menu when it is held portrait, but changes when held landscape. I can get the navigation to work, However I am unsure how to design landscape pages inside Flash?
    My stage is set to the standard 640x960 air for iOS, which gives me perfect portrait pages, But when I tilt my phone to landscape the screen obviously changes, and it looks weird. Im hoping someone can tell me how i can get this view inside Flash, while still having the portrait screens too?
    I want to have both Portrait and Landscape in the same app, and am currently so confused how I can design this inside flash?
    I hope this makes sense, and that someone could throw some help my way!

    you can change the display depending on stage orientation but it doesn't make sense to "..swap the stage orientation between screens".
    to change the display, use a StageOrientationEvent.ORIENTATION_CHANGE event and listener:
    stage.addEventListener("orientationChange", orientationChangeF);
    function orientationChangeFr(e:StageOrientationEvent):void{
    trace(e.afterOrientation.toString());

  • Multi-folio app with both portrait and landscape orientation

    Can we create a multi-folio app that contains both portrait and landscape orientation folios?

    A multi-folio app can have any mix of portrait, landscape, or dual-orientation folios in it. The only requirement is that for a specific folio all articles in it share the same orientation setting.
    Neil

  • Both Portrait and Landscape format using SMARTFORMS

    Hi All,
    I have a requirement where i have to print few pages in Portrait and few Pages in Landscape using Smartforms.
    Now my question is wheather it is possible using smartforms and if possible how can i build the logic.
    As i have to dispaly the first page in portrait and second page in Landscape format.
    Thanks in Advance !
    Thanks
    Shashikanth

    Hi,
    You can do the portrait/Landscape settings for each page. Click on the Output option of the page and there you will find the radio button for portrait and landscape
    Thanks
    Arul

  • Portrait and Landscape pages in the same data.

    We have to create a report, that contain Portrait and Lanscape pages in it. 1 portrait, 2 landscape, 3 portrait, 4 landscape, 5 portrait....
    Even if the output designer show the first page portrait and 2nd as landscape, if we process the data it is all output as portrait and the 2nd page is cut, that it fits portrait.
    Is there any command, parmeter to force JFMerge to place the data correct?

    Just played a bit with Pages trying to do that.
    The best I could come up with was to create the table in a separate Pages doc set to landscape, then take a screenshot of it. I then opened that in Preview and rotated the image 90 degrees, then saved it. I then dropped that adjusted image onto a separate page in the Pages doc set to portait.
    This method, of course, requires that the table be 100% complete and finished, since no data-, text-, or info-level alterations can be made to it after it becomes a screenshot.

  • Printing Portrait and Landscape pages on same report

    Hi all,
    Oracle E-Business Suite 11.5.10.2
    Oracle Reports Builder 6i
    I am developing atwo-sided EBS report which I require to detail invoice lines in Portrait orientation on one side and then have a landscape layout detailing other related information on the back.
    I am using the Main Section to display the Portrait orientation and the Trailer Section to display the Landscape orientation.
    This is producing the correct output when there is one invoice. However when there are multiple invoices selected in the Data Model, all the Portrait Invoice Line pages (Main Section) are printed first and then the Landscape Additional pages (Trailer Section).
    Does anyone have any suggestions to get around this issue?
    Kind Regards,
    Gary.

    In the pages panel, choose Rotate Spread View from the panel menu.

  • PDF with portrait and landscape pages

    I have a pdf with following composition:
    - first page include a dynamic table where users can click a button to add rows (portrait orientation)
    - second page include static content (portrait orientation)
    - third page include static content (landscape orientation)
    - fourth page include static content (portrait orientation)
    The problem is that when the table grows, the second page takes the landscape orientation,
    the third page takes the portrait orientation...
    It's possible keep the settings defined for that all pages generated from dynamic table takes
    portrait orientation, and the next page (initially the third page) keeps the landscape orientation.
    Thanks in advance.

    Don't works correctly.
    Attached a pdf test.
    https://www.yousendit.com/directDownload?phi_action=app/directDownload&fl=SWhZekZuTkFuSlR2 WnBSYTA4bnVnVE9yVEh2Z0g0R2oxeStBYWNnMnpwZDBFT0FjRlZrSW9acXREaGJNUWRGeC95VVhBWnlVQndJaks5d3 JPb3F4VXprMEhnb2hUbFlaMFlDWmNBPT0&experience=bas
    Thanks!!

  • Portrait and landscape in the same document.

    Hi there. I'm trying to print a portfolio that has both
    portrait and landscape pages in it. I understand that I can change
    printing propoerties to print in either portrait or landscape, but
    is there any way to configure settings so that both are present in
    the same document?
    Many thanks in advance.
    Regards
    irthom

    You can't do that in Pages. You either have portrait or landscape orientation of the pages. What you can do is rotating the content of the page if it is an image, objet or table.
    If the document is for reading on the screen you can export the document to PDF and in Preview rotate the page.

  • FrameMaker 10 Save as PDF and landscape pages

    Using FrameMaker 10 on Windows XP Professional SP3 32 bit system - When I use the Save as PDF function on a book containing both portrait and landscape pages, the landscape pages are clipped to portrait mode. If I print to Adobe PDF, the page orientation is correct in the PDF, however, no bookmarks are generated. If I check the Convert CMYK colorsto RGB setting in the PDF Setup for Selected Files dialog box, then the page orientation in the PDF is correct, and the bookmarks are generated as they were in FrameMaker 8.
    Is there a method to this madness?

    I have Acrobat 8 Pro. The explanation of the RGB mode with XP makes sense. I did not know that. Makes me wonder how Frame 8 was producing all the nice PDFs we have used for the last couple of years.
    I tried that setting because I saw others were having issues with that and wondered if there was a relationship between the two. Just a guess.
    Printing to a file and distilling it does not produce a PDF at all.
    Thanks for your help.

  • A single report can't combine portrait and landscape oriented pages

    Post Author: joelo2
    CA Forum: Crystal Reports
    Hi,
    Can a single report in Crystal report XI (version 11.5.8.826) combine portriat and landscape oriented pages like Crystal report 2008?   For example, I have one main report with several subreports in the main report.  I want one subreport be in portrait page orientation and the other subreports in landscape.  Can I do something like that in Crystal report XI version?    I even tried writing a small .net program to do this, but it doesn't seem to allow me to do that programmatically either.  Please help

    Post Author: ngra
    CA Forum: Crystal Reports
    I'd like to elevate this issue with Crystal Reports XI. There is a critical application which we developed in-house which needs both portrait and landscape orientation in each of the 30,000 plus documents we are sending out every month.If developers in Business Objects are picking this thread up - we need a patch for this limitation - quick. Right now, we are toying with the possibility of exporting the documents into a text format with markers indicating if a page is portrait or landscape. This is to be loaded into a Xerox machine (which costs hundreds of thousands of dollars), where it is mapped automatically to portrait or landscape. Note to Business Objects: This will provide us and countless others with much value. Think 80/20 rule - most bang for your development bucks and value for your customers!

Maybe you are looking for

  • How do I only put selected iPad Pages docs onto iCloud?

    I am using the latest Pages app on my iPad2.  I want to only put certain documents from Pages into iCloud.  I want to do the same with Numbers and Keynote.  In other words, I want to decide what does and does not go onto iCloud.  Is there a way to do

  • How do i set up email address to print from iphone?

    how do i set up email address so i can print from my iphone into my wireless printer?

  • No Audio Out Of Headphone Or External Audio Output Jacks

    We have a Rev. B Bondi iMac that I recently put in my wife's 4th grade classroom for her to use. When trying to hook up external speakers I discovered there is no audio output from the side audio output jack or the front two headphone jacks when list

  • IDOC to Flat file and Flat file to IDOC

    Hello Experts,   I have the following requirement in my current project: Third Party Sender sends the data in the in the below XML format via HTTP: <?xml version="1.0"?> <fxEnvelope>   <header>     <message>       <exchangeID></exchangeID>       <mes

  • Dual screen HP Pavillon P6-2427eb

    Hi, I have recenty bought a HP Pavillon P6-2427eb PC. It has a seperate video card with a DVI  + HDMI connection. I want to use dual screen, but when I connect both screens it doesn't work. The first screen is a fujutsi siemens screen wich is connect