Printing does not print the web page only the http info at top of page and dated and time at bottom of page, nothing in between. help! Thanks.

Printing a web page works fine from the microsoft windows browser but fire fox browser will not print a web page only the heading at the top and the date and time at the bottom.

Does that happen on all pages or only on some?
You can try to reset the print prefs on the about:config page.<br />
* http://kb.mozillazine.org/Problems_printing_web_pages
You can open about: pages via the location bar like you open a website.

Similar Messages

  • Printer does not print. Even the test page did not print. I put in a new cartridge.

    Printer doesn't print.

    adnerb wrote:
    My printer does not print the computer screen says scanner failure. I have a HP Officejet 5610v All-in-One printer. The printer is connected with USB.  The operating system is Windows Vista.  Help!!
    See the troubleshooting steps in this page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

    HP Color LaserJet CP2025  / Windows 7(64bit)-Why the printer does not print color letters??

    Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

  • HP printer does not show up as part of the neighborhood in printer utility

    Hi Everybody -- I am trying to connect to a shared HP printer connected on my XP machine. It works fine when trying to connect to it from other pc's, however, when ever i try to connect to it from my MAC, the pc name and printer does not show up as part of the neighborhood in the printer setup utility (which is weird).
    I do have the drivers installed for that particular printer and it works fine with USB connection (HP6110). I know this is not a firewall issue becuase I tried connecting to the printer while disabling the firewall.
    Appreciate any help on this matter.

    Look over the printer sharing articles on iFelix Tech Notes.
    In addition, check the Mac's System Preferences> Sharing> Firewall tab> Advanced button and uncheck 'block unwanted UDP traffic' and "enable stealth mode". On the WinXP computer, go to Control Panels> Administrative Tools> Services and set 'Computer Browser' to manual from automatic.

  • HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

    I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank.  I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
    1) Rebooted Printer
    2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
    3) Checked venting - Not the problem
    4) From Tools ran head cleaner - still only prints colors (or grey)
    I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased.  I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
    I have the SN and product number available if a tech needs.
    Chris

    Hi @crfldf 
    Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
    If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
    If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Cannot scan to e mail - Printer does not wake up - Web access issues

    I own the HP 7520 AIO since a couple of months.
    Everything was working fine untill 2 weeks ago
    After a couple of hours , you cannot print anymore, you have to reset the network connection. Sometimes it works just by reseting the wireless , sometimes you have to go for a printer shutdown , plug out the cord (because you cannot power on again the printer by pressing the power button)  and replug. I tried to configure again Wireless connection but I does not solve the issue .
    In addition,when I'm trying to access to apps or to scan to e mail from the front panel, I'm getting an error message saying that  it is impossible to connect to Web services.
    I tried to reset the printer to factory but now it's worst I cannot configure e print anymore at all...
    Scan to computer (to Windows) is working all the time (to Mac has never worked from the printer but work from the computer) 
    I did not change something to the home wireless (router or others) since I first configured the printer.
    Could you please help me to solve these issues ?

    Hi engte,
    Welcome to the HP Support forums.  I understand that you are unable to scan to email with your Photosmart 7520 printer and also you are unable to connect to web services.
    To reconnect to web services please set a manual IP address and DNS servers.  I have included a link to another post I did with the steps (including screen shots).   It also sounds like the router may have had a firmware update so I’ve also included the Printer Does Not Maintain Wireless Connection document.  There are several valid trouble shooting steps to follow if the manual IP doesn’t correct things.
    Please let me know how it goes.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • When printing on photopaper with HP PSC 1510, the top part of the print does not print.

    When I try to print on photopaper with PSC 1510, it does not print the top part of the print - the paper seems to get feeded well. It looks like it somehow moves the printing area 10 cm higher on the document, so the pictures are cut in the middle and the top part is not printed. This varies - printing using the Windows image preview didn't cut off as much as Open Office's Writer.

    As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

  • HP PSC 1300 Series printer does not print the entire last line on page

    Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

    I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

  • Hp 200 wireless printer does not print the shared attachment only body of the email

    In the past I have been able to share an email with the printer and the attachment was printed. Suddenly only the body of the email prints but no attachment. Would also like to know whether one can suppress the printing of the body of the email and print only the attachment. Don't want to waste paper.

    Thanks for that additional information @Karl3.  
    I have a few suggestions that may resolve your ePrint issue.  It is possible to print attachments using the ePrint via email method, but results may vary.  At times, the formatting of an attachment is lost when using this method or at worst, it will not print.  
    As it's clear your PDF document is not printing using this approach, I recommend downloading and installing the HP ePrint app - click here to do so.  
    You'll see that it's geared towards Android users, however, if your Blackberry Z10's software is up-to-date, this app should work for you.  Once installed, you'll be able to launch the ePrint app and print directly from files and documents saved to your device.  With this interface you have greater control over what comes out of the printer.  
    With respect to your query about eliminating the extra pages that result from your phone's email signature, click here for instructions on how to turn off your email signature.  If you swipe Auto Signature off as indicated in Blackberry's forum, this should ideally stop the undesired signature page from accompanying all ePrint attachment jobs.  If the ePrint app doesn't work out for you, see if printing with the signature off yields a better result.  Keep in mind when you're sending ePrint jobs to your printer via email that you need to have something in the subject line.  
    Please let me know the result of your troubleshooting by responding to this post.  Best of luck!  
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • E-print does not print attached documents. Only prints text in mail if no attachments

    Hi,
    When emailing a document to my Hp photosmart 110 it will only print the job if I type in the mail and send it. If a document is attached (word, pdf etc) then nothing is printed, though I get the a mail in return "job received" and not later on a mail "job failed".
    In the e-print center I can see the job but in red it says "system error" ! I have tried several times and many different documents (only one document attached at the time). No changes has been made to any systems. The problem has existed for some week now. Please help
    (hp photosmart b110, operating system windows XP, mail: Outlook, No changes made to any systems)

    Hi,
    When emailing a document to my Hp photosmart 110 it will only print the job if I type in the mail and send it. If a document is attached (word, pdf etc) then nothing is printed, though I get the a mail in return "job received" and not later on a mail "job failed".
    In the e-print center I can see the job but in red it says "system error" ! I have tried several times and many different documents (only one document attached at the time). No changes has been made to any systems. The problem has existed for some week now. Please help
    (hp photosmart b110, operating system windows XP, mail: Outlook, No changes made to any systems)

  • Printer does not print the blue ink and clean printheads does not show the blue blocks

    I cleaned my printheads numerous times and ran the printing test but the blue blocks do not show up.  There are no streak lines in any of the other colors. How do I fix this problem?

    Hey there @mvelalis!
    Thank you for posting on the HP Forums!
    I would be happy to provide some assistance regarding the cyan not printing.  If you have already run the printhead cleaning with no success in getting the cyan to print then I suggest removing the printhead from the printer and manually cleaning the copper contacts.  The printer takes 4 print cartridges and 2 printheads.  The printheads need to be replaced like cartridges but not as often.  The printheads are what actually put ink onto the page.
    To manually clean the printheads click: http://support.hp.com/us-en/document/c01609042
    I was also able to locate a document regarding Fixing Print Quality Problems for the HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g....  I suggest going through the documents for possible solutions to your issue!
    Please post back and let me know how it goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Hp6110xi all in one printer does not print color

    HP all in one HP 6110xi stop printing in color. This printer is 5 years old and has print color before. I update to the only drive online. Still nothing.

    There is no cartridge expiration on the Officejet 6110 that would cause it to stop printing in color.  The end of warranty date (as shown here) is simply the end of warranty, the cartridge may continue to be used after that date.
    There are a few things to check:  what happens when you select a color copy?  Are there any error messages?  Does the printer go through the motions of printing but with a blank page?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer does not print ...iMac OSX 10.9.5

    Printer is connect to WiFI with address of 192.168.1.3
    Printer shows as default printer on iMac
    printer functions such as ink levels show on computer
    when "print" is activated...printer icon pops up on iMac desktop
    then this message...
    "printer is not responding"
    this has happened many times in the past and I have resolved by shutting down the printer
    and then powering back up...aggravating however I was eventually able to print
    not anymore...
    cannot get beyond "printer is not responding"
    your immediate assistance is needed

    Hi @tr2ky ,
    I see that you aren't able to print. You are getting the message "printer is not responding". I would like to help you resolve this issue.
    If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
    Type the IPv4 address into your web browser's address bar. (Safari)
    Did it load the page?
    If it loaded, then the printer is still on the network.
    You might have to restart the Mac and power cycle the router if it doesn't load the Embedded Web Server.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try printing again.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Addressbook  label printing does not print country

    If in addressbook labelprinting tagbox "country" is activated and also the tagbox "except own country", no country is printed.
    In my own card in addresbook the country is indicated.
    I use leopard, how can I correct this??

    Does that happen on all pages or only on some?
    You can try to reset the print prefs on the about:config page.<br />
    * http://kb.mozillazine.org/Problems_printing_web_pages
    You can open about: pages via the location bar like you open a website.

Maybe you are looking for