Printing doesn't show any colors; only black and white

Hello all, I am trying to get this page (that I'm developing) to print in Firefox 8:
http://theprojectteam.co.nz/joomla-dev/index.php/workshops/register
In IE8, it prints fine. In Firefox, it only prints in black and white. The logo at top left, the checkboxes, and the "terms and conditions" link don't print at all. The title image prints in a dithered kind of fashion.
Print preview shows everything except some of the borders on the inputs are missing (I assume a border rounding issue...)
Checking "print background" in Page Setup makes no difference.
Printer I am testing with is a HP PSC 2350 multifunction. Bit oldish but seems fine otherwise.

In the print dialog box, click and hold on Copies and Pages, then move down and select Print Settings. Here you'll see the Color/Black and White setting adjustment.
I'm assuming it does print in color from the PC, so nothing wrong with the printer?

Similar Messages

My printer will not print in color, only black and white.

I have an Epson NX 420. I have set it up to my laptop, and am able to print off of my computer. But when I go to print a document out of pages, even though it says it is in the color mode it only will print out in Black and White. Is there something I should be downloading? I do know that the printer can and does print in color, because everything works perfectly fine on my Windows computer.

There are a few things to check:
Make sure the blue tape has been removed from the nozzle plate.
Print a diagnostic page as shown in method 4 here. Does this page print color? If so the issue may be your driver settings. Check for a "Print in grayscale" setting and uncheck this box.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to print something the same in color as black and white?

I have a gray box that I set as black and then set the tint down to 20%. When I print this in color it prints with a pink tone. When I print it in black and white it prints correctly. Any advice?

I am pretty new to this. How do I calibrate it?
I am not sure what a command workstation is. I have tried different choices in the properties of the printer and it doesn't change anything for the better. Some make the graphics worse.

Color LaserJet 2605dn Printing only Black and white

I have a Color Laserjet 2605dn and all of the color ink cartridges have run dry. However the Black cartridge has over 2,000 pages of ink in it and the printer will not let me prink only Black and White. It seems the color cartridges must also have ink in them in order for the printer to print. Does anyone know a work around so that I can print with the Black Cartridge and not purchase the color cartridges?
This question was solved.
View Solution.

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

My Macbook Pro will not print color to my HP B209 Printer, only black and white...

My Macbook Pro Yosemite will not print color to my HP B202 printer, only black and white. Help!

Hi ..
Try a reset > Mac OS X: How to reset the printing system

Is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

You're welcome.
What?
Sorry, but no. The parts are identical with the only difference being a white housing or a black housing.

How do I set my Ricoh Aficio SP C220N to Default to print only Black and White?

HI Guys can you help?
How do I set my Ricoh Aficio SP C220N to Default to print only Black and White? When I check print Grey Scale box it uses the other colours to create the black instead of using the black toner cartridge. doing this from a PC works fine but not of a Mac and I am a newbie at this can you help as I don't want to waste any more colour ink unnecessarily.

Hi,
Follow the steps below to print using Black Ink only:
1. From the application used to print, click the File menu and select Print. The Print window appears.
NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Black Ink Cartridge Only.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Any used preset will remain default so simply select teh standard preset to print in color.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

G4 Imac 1ghz Video adapter TV shows only black and white

Have purchased correct adapter for this machine...when using s-video cable get only black and white on TV. Using rca jack we get color but of course with poorer resolution. Any suggestions re: problem
Tom

Hi, I own a Satellite S1410-801 purchased in Italy but few months ago I moved to Venezuela where the TV system is different, I mean, is there a way to change or use a laptop with PAL TV out system in a region or coutry with uses a NTSC system?
Thanks in advance.

How do I change an hp officejet j6400 printer change from color to black and white? I have a Mac 10.8 OX system

How do I change an hp officejet j6400 printer change from color to black and white?
I have a Mac 10.8 OX system

Hi JasperNM,
You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
First locate the printer IP address as following:
Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
On the control panel, press the Setup button ( ).
Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
Press the OK button to select Print Network Settings .
Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
Now map a network driver by following the steps below:
Click the Finder icon on your Mac.
Click the Go menu.
Click on Connect to Server.
In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
You will be prompted to enter the password. leave it as is and click on Connect.
The Memory card will be mounted as a disk in the Finder.
Shlomi

Print only black and white on macbook pro from hp 1200

how do i print only black and white from an internet site (safari) using only black and white. i have a macbook pro and hp 1200 deskjet. using os 10.9.1 thanks.

Hey there columbipaws, Welcome to the Forums!
I noticed your post about wanting to print in black and white in Safari. I had a similiar situation to your question earlier and would like you to see the two guides I have in my other post. Click the link below to get to them!
Mac OS X Printing in Black and White
If this post helped you, please select it as the Solution so others can see the links!
Thank you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My iPhone 6 went from color to black and white

My iPhone 6 went from color to black and white. How do I get back to color?

Of course it's not the quick fix lol. Sorry that didn't work for you, that is the only setting I'm aware that would cause that behavior. Hopefully someone else will assist if they know of another way that may happen. The next thing I would recommend is backing up the iPhone and then doing a reset.
Since you have an iPhone 6 Plus it is most likely still under warranty. If you have time you could try reaching out to Apple support directly by going to there support page, linked below, and clicking "Get Started".
https://www.apple.com/support/contact/
If there are any other important details, like it only occurs in a specific app, feel free to include those in this post as it may help others to figure out what happened.

PSE 8 coloring a black and white image

Okay, so I downloaded a free trial of PSE 8, so my experience with it is limited, which may contribute to my problem. I've watched tutorials on how to add color to a black and white photo using the paintbrush tool, though I haven't watched one for PSE 8.
I'll make a new layer, paint part of the picture, and then add another layer. But when I click a different color to paint with, it changes the color of what I already painted, even though I'm on a different layer.
Also when I tried to just save the image with one part painted, it didn't save it, and the image looked as it did originally.
Any help is appreciated! Thanks!

Hi,
Are you using the right tool to paint on a layer?
For coloring a black and white image, you need to save different areas of your image on a different layer and then use either Paint brush or a Paint bucket tool.
It seems that you are selecting a wrong tool. For selecting Brush, press B.
Then try painting on one part of the image and then go to the the color swatch present at the end of the tools panel on the left as :
Now click on the foreground color swatch(on the top) to change the color with which you want to paint.This will not change the color of other layers on changing the color.
Cheers
Swarnima

How can I color a black and white imported jpeg?

I am new to Illustrator, and have been watching MANY videos, but just cannot seem to figure out how to color the B&W photo I imported into Illustrator CC. Do I need to do something in Photoshop first? Am I missing a step? I was able to trace the image but from there I am lost. Any suggestions are greatly appreciated!

How can I color a black and white imported jpeg?
In case you don't want to trace it first:
-> it needs to real Greyscale. Not just desaturated RGB
-> Do not save it via Save for Web in Photoshop.

Can I change more than one photo from color to black and white at one time?

can I change more than one photo from color to black and white at one time?

Check out iPhoto Batch Enhancer
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Trying to update and my nano screen goes from color to black and white...

Last time this happened I lost all of the information on my ipod.
I was trying to get my newly purchased music from itunes to my nano. I couldn't. The help sections told me to update my ipod. I'm currently trying to update with 2006-03-23 and the screen still says "initializing" and actually as I type this the screen that says initializing appears frozen (although I've learned apple stuff is weird because it appears frozen but it's not). How long should this take? Is there something I'm doing wrong? Why does my ipod screen go from color to black and white? Do I need to redo anything? Do I need to reset my nano?
Please help with the ******** mac user (I've always used Windows and I am lost in the mac world apparently when it comes to ipods)

Can you get the exact wording for that error? Is it can't mount iPod?
Also, make sure iTunes is up to date...
iTunes
Finally, make sure your iPod's battery is charged up.
btabz

Printing doesn't show any colors; only black and white

Similar Messages

Maybe you are looking for