Printing doesn't work after 10.1.3 update...

We did a deployment with System Center 2010 and the majority of our workers cannot print from the reader.
The solution for now is deleting their profile. As you might imagine it's not a great solution.
We didn't had any issues with the 10.1.2 but now we do... you say the printing issue is fixed but for us the printing issue just started after 10.1.3.
Anyone found out which file \ configuration \ registry key is making this happen? We tried deleting the adobe reader folders inside the user profile but didn't solve the issue.
Thanks.

Any update to this? I have the same issue with 10.1.4. If I disable protected mode it works.
Also other users on the same machine can print the same PDF with protected mode on.

Similar Messages

Imessage doesn't work after ios 6.0 update.

My imessage doesn't work after ios 6.0 update. The white bar fills up until just a little slicer is left and then it says message failed.

*sliver of the white bar.

My Canon printer doesn't work after updating

Hi everybody.
Everytime when I update software, my printer doesn't work. I use Canon i-sense lbp3010b. For example, when I try to print out a document, I press the PRINT button (in any application) and it opens the printer application. It shows the message "Printing…" for some 3 minutes, then shows "Paused". I try to resume the process, but it doesn't help-the same scenario, again. Once, I have another problem on printer, which printed only graphics, not text. I solved this problem downloading the printer driver from canons austrian web-site, but it doesn't help either anymore.

Might be best to delete device driver for printer before updating. Then try setting your printer up afterwards. The update may have some compatibility issues. I'm sure there will be updates and bug fixed in the near future. There have been a lot of issues with the recent lion software updates especially. Best thing I can say is be patient and make sure you submit this issue to apple.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

Javascript doesn't work after OSX10.8.3 update

The javascript on both google chrome and safari doesn't work (I cant open certain popup windows that uses it) after I installed the OSX10.8.3 update. I checked the settings and javascript is enabled in both browsers. Any advice is appreciated. Thanks in advance!

Okay I solved it by resetting the PRAM and SMC.

HP Printer doesn't work after changing computers

After a recent change to a new ASUS computer running Windows 7, I cannot get the Deskjet to print. It was working perfectly before the changeover. I have downloaded HP Print and Scan Doctor. I am told that the driver is already in the Windows 7 software, however the Doctor reports that " the full software solution for your product is not installed on this computer".
I have tried disconnecting and reconnecting the USB link, but with no success. (he USB cable is linked via a cord-mounted
25 pinDIP connector to the Deskjet.
It seems that no communication is happening between computer and printer.
I'd much appreciate some helpful comment!
Thanks
Rodney

Thank you for your question re my DeskJet710C printing problem.
Yes there is a problem listed in my Device Manager Universal Serial Bus Controllers.
It mentions an Unknown Device with Port_#0002.Hub_#0004. It says no driver files are loaded or have been required for this device. I have tried changing this Port to 0001 without success.
There is a similar port called USB Printing Support listed with the Device Manager, giving a Driver File:
C:\Windows\System 32\DRIVERS\usbprint.sys ..... but this doesn't seem to exist on my current system.
I have tried downloading it from the net, but without success - I guess it needs installing on the Registry (?).
Should I use something like RegCure to get this installed?
Many thanks
Rodney

Safari doesn't work after iOS 8.3 update

After the iOS 8.3 update, Safari is completely useless. I am unable to open any URLs or search. Nothing happens when I type and return in the search bar. Sometimes even the go button doesn't highlight/activate.
I tried removing cache and disabling iCloud, but nothing worked.
Does anyone have a solution?

Replying to my own message.   I actually looked at the device logs again there is a bunch of mobile safari issues.   Most of which apple would have to symbolicate against their source to figure out the actual bug.
Looks like some deadlock issues, which explains what I am seeing.
Here is segment of one of the crash logs:
Incident Identifier: DE800F40-F473-46F0-AD43-47FEF1EFC22C
CrashReporter Key:   d8e20c2a00e03bcf19302e14fc9a7dfd8ee63e77
Hardware Model:      iPhone7,2
OS Version:          iPhone OS 8.3 (12F70)
Kernel version:      Darwin Kernel Version 14.0.0: Sun Mar 29 19:42:54 PDT 2015; root:xnu-2784.20.34~2/RELEASE_ARM64_T7000
Date:                2015-04-16 20:36:22 -0500
Exception Code:      0x8badf00d
Reason:              com.apple.mobilesafari failed to exit in time
Elapsed total CPU time (seconds): 6.790 (user 6.790, system 0.000), 68% CPU
Elapsed application CPU time (seconds): 4.593, 46% CPU
Thermal data unavailable
Frontmost process PID:    480
Frontmost process PID:    787
Frontmost process PID:    54
Stackshot trace buffer size too small, trying again with 524288 bytes.
Jetsam Level:              0
Free Pages:             5719
Active Pages:          71064
Inactive Pages:        29457
Purgeable Pages:          95
Wired Pages:           55448
Speculative Pages:      5501
Throttled Pages:           0
File-backed Pages:     52859
Compressions:        2964481
Decompressions:      1940201
Compressor Size:       85417
Busy Buffer Count:         0
Pages Wanted:              0
Pages Reclaimed:        4730
Process 0 info:
resident memory bytes: 1946058752
page faults:               42305
page-ins:                      1
copy-on-write faults:          0
times throttled:               0
times did throttle:            0
donating PIDs:
user   time in task:       76194.184738 seconds
system time in task:           0.000000 seconds
Process 0 kernel_task threads:
thread 0x65 TH_WAIT|TH_UNINT 0xffffff8002533db4
thread priority:               92
Base thread priority:          92
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel cont: 0xffffff80020a03ac
user   time in thread:    40.375121 seconds
system time in thread:     0.000000 seconds
thread 0x66 TH_RUN|TH_IDLE 0
thread priority:                0
Base thread priority:           0
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel cont: 0xffffff800203097c
user   time in thread: 35557.313444 seconds
system time in thread:     0.000000 seconds
thread 0x67 TH_WAIT|TH_UNINT 0xffffff800202c0c8
thread priority:               95
Base thread priority:          95
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel cont: 0xffffff800202c0c8
user   time in thread:     7.218136 seconds
system time in thread:     0.000000 seconds
thread 0x68 TH_WAIT|TH_UNINT 0xffffff80024ee1a0
thread priority:               80
Base thread priority:          80
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel cont: 0xffffff8002046fd4
user   time in thread:     5.578716 seconds
system time in thread:     0.000000 seconds
thread 0x69 TH_WAIT|TH_UNINT 0xffffff80024ee1b0
thread priority:               93
Base thread priority:          93
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel cont: 0xffffff80020472ec
user   time in thread:     0.308781 seconds
system time in thread:     0.000000 seconds
thread 0x6a TH_WAIT|TH_UNINT 0x33726011cd329b29
thread priority:               95
Base thread priority:          95
requested qos:           QOS_CLASS_UNSPECIFIED
requested qos overrride: QOS_CLASS_UNSPECIFIED
effective qos:           QOS_CLASS_UNSPECIFIED
thread sched flags:     none
kernel: 0xffffff8002031fd8 0xffffff800202fed8 0xffffff8002051f34 0xffffff80020df3a0
user   time in thread:     0.000072 seconds
system time in thread:     0.000000 seconds

Touch ID doesn't work after iOS 7.1 Update

After installing iOS 7.1 Touch ID stopped working. When I put my finger on the sensor nothing happens.
I already tried rebooting and switching Touch ID on and off. None of that seemed to work. Is there anyone else experiencing similar problems?
Update: Right now I'm trying to set up a new fingerbrint but it doesnt even start scanning when I put my finger on. It just doesnt do anything. I have a feeling that the sensor might be broken...

Same problem, after upgrading to 7.1 touch ID stopped working and will not let me enter new fingers, acts like I am not touching the sensor.
Additional info:
The company I work for requires passwords to be on to access mail, when I am at work I will try deleting that mail account and turning off password requirements. It is an Microsoft Exchange mail server.
Additional info2:
In Xcode there are no messages in the console for the iPhone that are related. Unrelated messages do pop up confirming the log is active.
Is there a setting I can make to turn on more logging?
Message was edited by: Zigdot

Scanner hp c4200 doesn't work after 10.5.3 update

Hello,
Since 10.5.3 update when i launch "hp scan pro" i got the message "Error, scanner not found".
When i login "installation hp assistant" is launching and ask me to select a device, but the list is empty.
No message on Applications/Utilities/Console.app about the problem.
On system preferences, printer is ok.
I can print as before.
Thank you for answers.

I was having a similar problem with my HP Officejet 6310xi. Scanning worked fine from my 10.4 machine but the software on 10.5 wouldn't find the scanner. Went back and downloaded the driver again from HP and installed it - all 200+MB. Now the scanner works. I denied all the firewall requests and it still seems to work.

Safari 3.1 doesn't work after Firmware 1.5 update

Hi. After downloading the Firmware 1.5 update, I can't use Safari 3.1 anymore. I am able to connect on-line (e.g., I can search successfully for updates), but I cannot web-browse. I reloaded my ISP software, and that is not the problem. I also have cleared the cache on Safari and that didn't help either. Please help. Thank you!

Ewen wrote:
If you were actually right don't you think that Apple would put a proviso on every software update to repair permissions before and after install in their release note? Or perhaps even automate the process for OSX user as part of install process?
Do you Verify your disk occasionally? Apple could automate that as part of chron scripts, but they don't. In fact, the chron scripts themselves only run if you leave your machine active overnight. There are plenty of things that Apple could do, but doesn't. Why? Only they know.
But, the OP has an app that is not opening, and DU help states: "If you have trouble opening applications or documents, or if your computer is running slowly, the user permissions for some of your files may be set incorrectly. Permission problems sometimes happen after you update your system or install new software. With Disk Utility, you can repair these problems."
Ewen wrote:
That's another matter, but you didn't actually suggest it first in topic. OP can easily test this by Verify permissions. Repair permissions probably won't hurt but I'd hate for a Mac user to start performing a troubleshooting step with little or no logical reasoning behind it.
No, why would I? S.U. suggested it, and the OP asked how to do it.
Ewen wrote:
so if you answer every question with this as a suggested course of advice you will be right some of the time, but not all of the time.
Yes, and we all know a broken analog clock is accurate twice per day. But I don't advise this all of the time, most of the time, or even some of the time. Rarely would probably be the best descriptor.
Ewen wrote:
I think its just a waste of time unless actually a permissions issue may be present. Permissions issues do crop up (and may explain OP issue) so if you answer every question with this as a suggested course of advice you will be right some of the time, but not all of the time.
I would argue that Verify Permissions is a waste of time, since if incorrect permissions are found, the next step is to Repair Permissions, right? So why not just Repair? You imply that somehow that Repair Permissions step will have negative consequences. What is your evidence for that?
Ewen wrote:
I think its just a waste of time
If the only negative consequence to Repair Permissions is that it's "a waste of time," honestly, what's the harm? I think that anyone who has followed this thread down to this point now has a very good understanding of what "waste of time" really means!

IPhone doesn't work after 1.1.3 update

I installed the iPhone 1.1.3 update two nights ago. After installing I had no phone service, wi-fi or bluetooth. Everything else on the phone seemed to be working. Connecting to iTunes resulted in an error saying the phone may be damaged and I should take it to an Apple store.
The guy at the Apple store reset or restored the phone. Now the screen just shows the USB pointing to an iTunes logo and the phone does nothing anymore - almost like it needs to be reactivated. And connecting to iTunes gives the same message that it's damaged.

Just adding in that the same thing just happened to me and so my phone is out of action until this is solved. I reset the phone and tried to restore within iTunes, but the phone just goes into recovery mode and I get an error message in iTunes.

Boot Camp/Windows XP Pro doesn't work after 10.5.8 Update

I installed the 10.5.8 update, but then Windows would not boot up under Boot Camp. Anyone else have this problem? I tried several times and even went into Safe Mode to see if I could fix anything. Unfortunately, I'm not a Windows expert, so I really didn't know what to do in Safe Mode.
In the end, I reinstalled Windows via the Boot Camp Assistant and so far, everything works again. I only use 3 programs in Windows so luckily, I didn't lose anything. I just copied my data files over in MacOS and reinstalled the 3 programs in Windows, but it was a time waster! Please fix this Apple!
Just a warning to other Boot Camp users...

Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

FaceTime doesn't work after the latest ipad update. How do i fix it?

When I enter my apple id and password it says its incorrect even though I know it is correct and even works to sign into my itunes & App store

Are you sure you have a good internet connection?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

FaceTime doesn't work after the latest iphone update. How do i fix it?

When I enter my apple id and password it says its incorrect even though I know it is correct and even works to sign into my itunes

IOS troubleshooting facetime http://support.apple.com/kb/TS3367

Printing doesn't work after 10.1.3 update...

Similar Messages

Maybe you are looking for