Printing double line / small box residing in main box - Invoice smartform
Hi,
I have 2 Invoice smartforms, meant for Country_A and Country_B. We r on ECC 6.00
Country_A is printing fine.
But, when comes to Country_B, in ITEM table, the header box, (where column labels are printed), one more box is printing!! it looks like (not exactly) instead of single line ________ its printing ======, so, pls. let me know, Wht culd be the reason?
Thank you
Hi,
Check that if you used table borders in attributes of line types.
And also check if you are using sy-unline...
Regards,
Shankar.
Similar Messages
-
Printing double line in Column label Box/Table Line Type of smartform
Hi,
In MAIN window, in ITEM table, the header box, (where column labels are printed), one double lines r printing!! it looks like (not exactly) instead of single line (________) its printing double lines (======), so, pls. let me know, Wht culd be the reason?
Thank youHi,
Check that if you used table borders in attributes of line types.
And also check if you are using sy-unline...
Regards,
Shankar. -
Need to print horizontal line at the end of main window in each page.
Hi,
I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
Please suggest how to proceed.
Thanks,
RKUHi,
If you don't have any frame set on your main window:
Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
This will give you a line in the bottom of you main window.
If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless you mark this checkbox.
Regards
Åsa Thenstedt -
i have changed the toner that came with the printer but its the same old problem. it also leaves an overflow of ink on the top of papers. pls any body who could help
Hi JerryBoss,
I'll be glad to help. If double lines and ink overflow are still occurring after replacing your Canon toner cartridge, the symptoms indicate either a paper media, cleaning or hardware related issue.
Please ensure that supported paper weights and types are being used (16-60lb. depending on paper tray), and they are loaded properly without overflow.
An issue of double lines or black streaks that are either being produced only when using the Automatic Document Feeder, or with every print, can often be resolved with cleaning. Cleaning the Automatic Document Feeder and/or the Fixing Assembly can help. Clicking the link to select article "Cleaning the Machine" will walk you through the steps as well as cleaning the Platen Glass.
If the issue remains, after the above is performed, please contact us for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
ThanksContact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.
-
Printing In Main Window in Smartform After All Line Items
Hi All.
I have this requirement wherein I have to Print Export Charges in main window , below all the line items.
There is a loop on line item tables and I am printing all line items in the main window.
How to print this export charges after all the line items?
Points are assured !!!!Hi,
Create two row line in the main area of the table. First one for line items and the next for the export charges.
Hope this ll help u.
(Sorry, this ll print export charges after every line items, try to print the export charges in the footer of the table.)
Regards,
Prabhu
Edited by: Prabhuraj Krishnan on Apr 15, 2008 11:05 AM -
Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
Computer is an iMac wit OS X 10.4.11. I have used this computer and printer for 2 years or more with no problems. Now it prints out lines in bold on a page but not lines in regular.I've tried copying text to a different page and restarting printer. Will try restarting computer.
Sometimes it prints out gobblygook. If I restart the computer and printer and transfer the text to a different page, I can get the page to print correctly.
Help would be appreciated. I need this text for a 4-hour meeting tomorrow morning!
NancyHello,
Thanks for the post. We may have a ink related issue here, I've attached a couple of links below that may assist with this issue. (unfortunately not with the 35' of snow though) Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00257147&tmp_task=useCategory&cc=us&dlc=en&lang...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00947099&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.* -
Print a line after each constructor
Would one of you java gods tell me how i can print a line after each constructor that tells me that the constructor has been constructed?
* Employee.java
* Created on April 28, 2007, 11:58 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Pete Berardi
package edu.ctu.peteberardi.phase3db;
import java.util.Scanner;
public abstract class Employee extends Object
protected String EmpName;
protected String EmpAddress;
protected String EmpSsn;
protected String EmpEmployeeID;
protected double EmpYearlySalary;
protected double computePay;
protected String Constructor;
/** Creates a new instance of Employee */
public Employee(String name, String address, String ssn,
String id, double salary, double pay, String cvariable)
name = EmpName;
address = EmpAddress;
ssn = EmpSsn;
id = EmpEmployeeID;
salary = EmpYearlySalary;
pay = computePay;
public void setEmpName(String name)
EmpName = name;
public String getEmpName()
return EmpName;
public void setEmpAdress(String address)
EmpAddress = address;
public String getEmpAddress()
return EmpAddress;
public void setEmpSsn(String ssn)
EmpSsn = ssn;
public String getEmpSsn()
return EmpSsn;
public void setEmpID(String id)
EmpEmployeeID = id;
public String getEmployeeID()
return EmpEmployeeID;
public void setEmpYearlySalary(double salary)
EmpYearlySalary = salary;
public double getEmpYearlySalary()
return EmpYearlySalary;
public void setcomputePay(double pay)
computePay = pay;
public double computePay()
return computePay;
public void setContstructor(String cvariable)
Constructor = cvariable;
public String Constructor()
return Constructor;
public static void main( String args[])
System.out.print("Constructor has been constructed");
I do not know why you have declared the class as abstract. Abstract class must contain at least one abstract method.
In your code, there is no abstract method.
public Employee(String name, String address, String ssn,
String id, double salary, double pay, String cvariable)
name = EmpName;
address = EmpAddress;
ssn = EmpSsn;
id = EmpEmployeeID;
salary = EmpYearlySalary;
pay = computePay;
System.out.println("Constructor created");
}The above code works only when you instantiate the object for the class. If it is abstract class, it will not work.
Abstract class cannot be instantiated. -
Drawing Boxes in Script - main window
hi,
In script, in main window <u>after table line item datas</u>, i want to draw a box in which i will place some text. On drawing box, it appears on top of that window which i dont want, since it should be placed after item details.
kapil.I do not know this is still relevant for You or not but here is the solution what I did:
First of all I have to mention this requires SAP standard object modification. !!!
1.Start SE80 and get into STXC function group.
2.Select COP_RELATIVE_NUMBER subroutines and double click on that.
3.Click on Edit button and Get SSCR Object number from SAP.
4.Change interface of the COP_RELATIVE_NUMBER subroutines extending it with TYPE parameters
5.Change the first if Statement.
6.Extend the Relative case section with a new WHEN '#'.
7. Cange All COP_RELATIVE_NUMBER calls with new input parameter in CO_BOX, In CO_POSITION, In CO_SIZE.
From now in Your SAP script You can call BOX statement like this:
BOX XPOS #10 TW YPOS #10 TW ..
Will start drowing BOX from cursor current position plus 10 twip.
Numbers after the # sign are optional.
Solution works only with TW.
form co_box.
data: begin of bx,
x type i,
y type i,
w type i,
h type i,
f type i,
i(3) type n,
end of bx,
next(10),
xpos type i,
ypos type i,
is_relative like boolean.
bx-x = ft-wpx.
bx-y = ft-wpy.
bx-w = ft-wpw.
bx-h = ft-wph.
while co-endline = false.
perform cop_next using next 10.
case next.
when 'XPOS'.
*{ REPLACE ED1K902054 1
* perform cop_relative_number using is_relative xpos.
perform cop_relative_number using is_relative xpos 'X'.
*} REPLACE
add xpos to bx-x.
when 'YPOS'.
*{ REPLACE ED1K902054 2
* perform cop_relative_number using is_relative ypos.
perform cop_relative_number using is_relative ypos 'Y'.
*} REPLACE
add ypos to bx-y.
when 'WIDTH'.
perform cop_number_value using bx-w.
when 'HEIGHT'.
perform cop_number_value using bx-h.
when 'FRAME'.
perform cop_number_value using bx-f.
when 'INTENSITY'.
perform cop_next using next 3.
bx-i = next.
when space. exit.
when '.'. exit.
when others.
perform cop_warning using subrc_param_unknown next.
endcase.
endwhile.
perform cop_end.
check co-error = false.
perform pc_box using bx-x bx-y bx-w bx-h bx-f bx-i.
endform.
form co_position.
data: begin of pos,
x type i,
y type i,
end of pos,
next(10),
relative like boolean,
xpos type i,
ypos type i.
pos-x = ft-wpx.
pos-y = ft-wpy.
while co-endline = false.
perform cop_next using next 10.
case next.
when 'XORIGIN'.
*{ REPLACE ED1K902054 1
* perform cop_relative_number using relative xpos.
perform cop_relative_number using relative xpos 'X'.
*} REPLACE
if relative = true.
add xpos to pos-x.
else.
pos-x = xpos.
endif.
when 'YORIGIN'.
*{ REPLACE ED1K902054 2
* perform cop_relative_number using relative ypos.
perform cop_relative_number using relative ypos 'Y'.
*} REPLACE
if relative = true.
add ypos to pos-y.
else.
pos-y = ypos.
endif.
when 'WINDOW'.
pos-x = ft-tdwlefts.
pos-y = ft-tdwtops.
when 'PAGE'.
pos-x = 0.
pos-y = 0.
when space. exit.
when '.'. exit.
when others.
perform cop_warning using subrc_param_unknown next.
endcase.
endwhile.
perform cop_end.
check co-error = false.
ft-wpx = pos-x.
ft-wpy = pos-y.
endform.
form co_size.
data: begin of dim,
w type i,
h type i,
end of dim,
next(10),
relative like boolean,
width type i,
height type i.
dim-w = ft-wpw.
dim-h = ft-wph.
while co-endline = false.
perform cop_next using next 10.
case next.
when 'WIDTH'.
*{ REPLACE ED1K902054 1
* perform cop_relative_number using relative width.
perform cop_relative_number using relative width 'X'.
*} REPLACE
if relative = true.
add width to dim-w.
else.
dim-w = width.
endif.
when 'HEIGHT'.
*{ REPLACE ED1K902054 2
* perform cop_relative_number using relative height.
perform cop_relative_number using relative height 'Y'.
*} REPLACE
if relative = true.
add height to dim-h.
else.
dim-h = height.
endif.
when 'WINDOW'.
dim-w = ft-tdwwidths.
dim-h = ft-tdwheights.
when 'PAGE'.
dim-w = form_header-tdpagwidth.
dim-h = form_header-tdpagheigh.
when space. exit.
when '.'. exit.
when others.
perform cop_warning using subrc_param_unknown next.
endcase.
endwhile.
perform cop_end.
check co-error = false.
ft-wpw = dim-w.
ft-wph = dim-h.
endform.
*{ REPLACE ED1K902054 3
*form cop_relative_number using is_relative like boolean
* val type i.
form cop_relative_number using is_relative like boolean
val type i
type type c.
*} REPLACE
data: num type f,
next(10).
clear is_relative.
perform cop_next using next 10.
*{ REPLACE ED1K902054 1
* if next(1) cn '+-.0123456789 '.
if next(1) cn '#+-.0123456789 '.
*} REPLACE
perform cop_warning using subrc_param_unknown next.
clear: is_relative, val.
exit.
else.
if next+1(9) cn '.0123456789 '.
perform cop_warning using subrc_param_unknown next.
clear: is_relative, val.
exit.
else.
case next(1).
when '+'.
is_relative = true.
num = next+1(9).
when '-'.
is_relative = true.
num = next+1(9).
num = -1 * num.
*{ INSERT ED1K902054 2
when '#'.
is_relative = true.
num = next+1(9).
case type.
when 'X'.
num = ( ft-line_width - ft-rem_width ) + num.
when 'Y'.
num = ( ft-fill_height - ft-rem_height ) + num.
endcase.
*} INSERT
when others.
num = next.
endcase.
endif.
endif.
perform cop_num_val using num.
val = num.
endform. -
Office 2010 Don't print blank lines when data fields are empty
How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the topHi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang -
HP Laserjet P2035n is set to print double-sided, but I can't change it in the preferences
Last week i downloaded and printed a PDF file. Since then, my HP Laserjet 2035n is set to print double-sided. Here are the details.
I'm running an HP Pavilion Laptop with Windows 7 Home.
The printer is set up as a network printer.
When I try to print something, it stops after one page waiting for me to re-feed the paper manually to print on the other side.
It's only this laptop that's messed up. My other computer prints fine
When I go to Printers, right click on the 2035n, and select "Printer Properties" and look at the bottom of the General tab, it reads under Features "Double Sided: Yes"
If I then click 'Preferences..." and go to the Finishing tab, under Document Options, the box "Print On Both Sides (Manually)" box is unchecked.
Here's what I've tried:
I have uninstalled and reinstalled the printer
I reinstalled the printer drivers
I have tried reinstalling under a different name
Any suggestions? Can someone tell me where the printer preferences file is so I can manually delete it then reinstall the printer drivers? Is there a tool for the P2035N to uninstal EVERYTHING related to it?
Thanks.
This question was solved.
View Solution.Hi,
Please try the following settings:
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
At the very bottom, uncheck the Allow Manual Duplexing option.
Now try printing and check for any change.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How to print double sided from my Mac to my Canon MG6350
I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
Duplex Printing & Margin
from that menu. You should then see a checkbox marked
Automatic Duplex Printing -
How can I print multiple lines in my All Day Events (month view)?
Does anyone know if there is anyway to print multiple lines for all day events? When I print my iCal from a monthly view, my all day events (positioned as a header) only print the words that can fit into the daily box, instead of going into multiple lines and displaying the whole text.
For example:
Los Angeles County Fair, Don't forget to pick up John and Jen
will print as:
Los Angeles County Fa......Jen
Anyone have any idea how to solve this?
P.S. I have already tried meddling with fonts and page sizes to no avail.Welcome to Apple Discussions!
So far as I know, an allday event only ever shows a single line of text regardless of view.
Consequently, how much you can see is governed by the width of the day (or days) in that view. -
Problem in printing multiple main window in smartforms
Hi Experts,
I have requirement form client to print PO which consists of 4 page.
First page is cosists of header and some text.
In second page different header and line item.
Thirs page different header and line item.
4th page different header and line item.
I have printed tex in main window of first page and called command to trigger
second page main window, but i am getting dump.
How to print the line item in the multiple page of smartforms.
Regards,
UdupiHello ,
To print the text below are following steps which you can follow for your requirement :
1. Create the Four pages having the Main Window, but take care that Logic should be in First Page Main window only , other pages main window will be blank.
2. Create the Secondary Window in second, third & fourth page which will be same size as the main window having the text which need to be print in respective pages.
3. Logic Part - in the main window of first page fill all the data which you need to print in 1st to 4th page in different internal table. Now for example you need to print text in first page then in Main window create table having the data of 1st page.
To print data in Second page create one more table having data of secondpage and put the Command there (follow the same for next pages,)
I hope this will help you
Thanks
Romit Raina
Maybe you are looking for
-
I created another account using parental controls and somehow that new account is managing my first original one. The new account is being listed as admin in Users & Groups. When I logged into my original account, I go on Users & Groups to delete tha
-
Apple apps freezes after upgrading to Yosemite
Dear Apple community, I have been running Yosemite (10.10.2) on an iMac 21.5 inch late 2009 model, 2TB HD, 3.06 GHz Intel Core 2 duo with 16Gb RAM for the last 1 month. No major hiccups. Just today I was not able to make any selections on the menu b
-
Java.lang.NullPointerException in DataCacheManager
java.lang.NullPointerException at kodo.datacache.DataCacheManager.<init>(DataCacheManager.java:43) at kodo.conf.JDOConfigurationImpl.getDataCacheManager(JDOConfigurationImpl.java :1356) at kodo.runtime.PersistenceManagerFactoryImpl.getPersistenceMana
-
Why is the black MacBook more expensive?
It seems that you could configure a white macbook to have the same exact configuration as the black one, but pay $125 less. Are people really paying $125 just for the black color??
-
How to Import a Timecard in CSV format in OTL
OTL Guru's. I'm new to OTL, could you please guide me how to import a timecard from a CSV file using the existing APIs. Thanks, Himanshu