Printing duplex then simplex not working?

I downloaded a .pdf file and printed it duplex.  OK.  That worked fine.  Then I went into PROPERTIES and selcted Simplex.  It still prints in duplex?  It doesn't matter if I create a 'preset' and save the .pdf thereafter.  There doesn't seem to be  way to get it back in Simplex.
Or, is the simplex/duplex feature created when the document is created and therefore it can not be altered?  If that was so, I would think that the other options in the Properties dialog would be greyed out.  They aren't.  Go figure.
Confused in Seattle
ron

The paper trays are both 8" x 11". The top tray has checks, the bottom tray has plain paper. When I go to print, the print dialog defaults to the last saved setting which is supposed to use the lower tray, however when checking the setting it says upper tray. I have to switch to either another setting or to the Standard setting, then back to my saved setting in order for the paper tray to be set correctly on the lower tray. I would expect that whatever setting the saved setting has, it would change to the necessary settings and use it instead of using a default settings. I don't know if this is a bug in the OS X or the HP driver.
For example. I go to print in Safari, the printer says OfficeJet 7140xi, the Preset setting says OfficeJet (Lower Tray). When I check Paper Type/Quality, the paper tray is set to Upper Tray. I switch the Preset to Standard and back to OfficeJet (Lower Tray) and check the Paper Type/Quality and now the paper tray is set to Lower Tray. So, initially, when the print dialog comes up, it ignores the Preset settings and defaults to some other settings and manually you have to switch the Preset to another setting and back again in order to get the correct settings.

Similar Messages

  • VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

    Hi There,
    My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
    I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
    So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
    Please help urgently. Any helps is much appreciated. Thks in advance.
    Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

    I follow your instruction as below:
    1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
    - Run from my dev computer
    - Click "Print Report" button
    - Error message display - please see below
        The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
    2) Use a "saved data" report so that you do not have to worry about database logon.
    can't find the "saved data", please elaborate
    3) Then copy the exe to the 64 bit box and try to print using this sample app.
    -do you mean copy the exe to the 64 bit computer for testing ?
    ERROR Message
    CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
    Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
    Invalid printer specified.
       at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
       at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
       at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
       at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
    OK  
    Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

  • HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

    Hey nocillado,
    Thanks for using Apple Support Communities.
    It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using the same Apple ID for Store purchases and iCloud (recommended)
    Have a nice day,
    Mario

  • HT201263 my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    After being connected to a charging source overnight try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Printer Power button in not working,no light indication

    Hi,
    HP Deskjet F2400 Series
    My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printer.
    kindly, provide the solution.
    Thanks,

    Hi RamyaVemuri,
    Welcome to the HP Forums!
    I see that your printer power button is not working, and that their is no light indicators.
    I think this guide should help. 'The Cover is Open' Message Displays on the Computer.
    If that doesn't work, please respond with the type of printer you have as their are multiple Deskjet F2400s. Finding Your HP Product Model Number.
    Hope this helps, thank you for posting.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Photoshop CS5 Print Settings button does not work

    Photoshop CS5 (updated to newest version 12.0.4) Print Settings button does nothing regardless of printer requested.  Does not work with either an HP1102w or a Cannon Pro9000 Mark II.  I have deleted printers and reinstalled but it still doesn't work.  Using a Mac Mini with OS 10.7.5
    Message was edited by: HCASED

    Received this from Black Magic:
    From: Albert Chu [[email protected]]
    Sent: Friday, April 03, 2009 7:11 PM
    Subject: Re: For Albert: ISSUE: Playback Settings button in BlackMagic (Intensity Pro) project not working
    Importance: High
    Hello Joe,
    Funny enough, I was just about to run this test and happened to check with another tech about this.  Apparently another customer had gotten in touch with us regarding the same issue and after confirming this, found that it is a bug.  As such, this has been logged and we should hopefully see a fix for it in our future updates.
    Please continue to check our software downloads page for this update (we do an update roughly every 6 to 8 weeks).  Thanks for your patience.
    Regards,
    Albert Chu
    Support Engineer
    Blackmagic Design Inc.
    www.blackmagic-design.com

  • Windows Server 2012 - Printing using UNC path not working

    Hi,
    I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
    app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
    With
    the web app I receive an error "The data area passed to a system call is tool small". 
    Also,
    in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
    from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

    I have contacted IIS forum support.
    Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
    Their final response:
    Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
    works while the Samsung fails, as the HP one just "happens
    to work",
    http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
    Similarly, System.Printing was designed just for WPF.
    About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
    to help you out. This is not a trivial scenario.

  • I have an iPhone 5,  and unfortunately the phone  fell into a mud pit, since then, does not work.  I would like to inform me, where I can repair it Sao Paulo,Brasil

      I have an iPhoen 5, and unfortunately the phone fell into a mud pit,sice then does not work.I wouod like to infor me, where I can repair it  in Sao Paulo,Brasil
    Thank's
    Marc

    If you have an Apple store in your city, that would be the place to start...an Apple store genius bar can help.  Damage of this kind is considered out-of-warranty damage by Apple and not covered by the warranty.  Replacement of an iPhone 5 is $229 in the US, but not sure of the conversion to Brazilian currency.
    You can also find an appropriate customer service number to call on http://support.apple.com/kb/HE57

  • I have a HP P2015d, it works well with winx86 for duplex printing but it did not work on win7x64

    I have a HP p2015d and it work well with winxpx32, win7x86 for duplex printing but it doen't work on win7x64.
    I have installed PCL5,PCL6 downloaded from HP websie. It only allow me to print double sided manually.
    Are there any solution for my issue?

    You need a new battery. 
     

  • Print to Video Does not Work

    I am running Final Cut pro 5. I am trying to send my time line to a mindv deck using print to video. I have a monitor hooked up to the deck to watch what is being recorded. I set my in and out points in the time line and and select print to video from the menu. I do not have any of the boxes checked, because i have black and color bars already in my time line. I select in/out and hit ok. The screen goes black and my video shows up in the middle playing, but nothing shows up on my monitor and when i watch the tape that i am recording to, there is nothing on there as well. The device control is working, because I can capture footage off of the deck, but it seems to not be getting a signal when I am trying to print to tape. I have also tried edit to tape, and I press record on the deck after setting up the sequence and then I play the sequence, and nothing is still recorded onto the tape. For both edit to tape and print to tape, everything is working, but nothing is being recorded onto the tape. I have also tried hooking up my sony camera to be used to record, but that doesn't work either. Any help would be great thanks!
    G5   Mac OS X (10.3.9)  

    Make sure the deck has it's input selection set to firewire for starters...
    I'm not clear if this is part of the problem, but FCP 5.0.4 will run better in Tiger.
    But if you can see external video, you should also be able to print to video or edit to tape... if you can't then keep troubleshooting your Firewire connection... got a different cable to try? Can you capture video OK?
    Jerry

  • Lightroom 3 Print Moduel Layout Style not working??

    Hi all,
    With no change in Lightroom, all of a sudden I have issues with the "picture package" and "custom package" settings within the layout styles in the print module.
    For instance, if you are in "single image/contact sheet" and you have an image selected and on screen, then when you change to either "picture package" or "custom package" what should happen is that the image is then refected in the new picture package present. This does not happen at all.
    I can not even choose a present (which should work), or drag an image onto the page. It seems that "picture package" and "custom package" are simply not working at all.
    Does anyone have any suggestions?
    computer 1 is an imac using 10.6.8, and computer 2 is a slightly older imac using 10.5.8
    PS. it is now happening on both our computers which are on a network??

    Good point.  I don't have the latest.  I'll give it a try and post back to the site.
    Thanks

  • HP Laserjet 1010 & Wireless printing via Airport USB - Not working in SL

    Hi There,
    After just upgrading to Snow Leopard on my MacBook I tried printing wirelessly to my HP Printer, but no luck!
    Printer: HP Laserjet 1010
    Connected via: Airport with USB cable
    Snow Leopard recognises the printer and is fine to print when the printer is connected directly to the MacBook via USB cable, but:
    When I set up wireless printing, it finds the printer (via Bonjour) but simply will not print. The print monitor gets to 24% or so of the file processed and then just stops & fails.
    Everything was fine under 10.5 Leopard. It seems it should work, but no printing occurs! Any ideas?
    Many thanks,
    Paul

    I had a similar-sounding problem with my HP1012.
    The fix:
    a. power-cycled the Airport Extreme.
    b. Updated firmware.
    c. Select Print in an application.
    For an extended discussion of what I did see here - some of this may help:
    http://discussions.apple.com/thread.jspa?threadID=2142906&tstart=60
    Actually, at this point I have two printers connected: Airport Extreme ->USB powered hub ->2 printers. One is the HP1012, the other is an HP 4300 series inkjet. Took sometime to get it right, the first hub I tried apparently was not powered enough. In that vein, one earlier thread (a response to one of my posts) pointed out the possibility that the AE -> printer USB connection might not be adequately powered, and to try using an intermediate hub. Assuming your AE is performing properly in all other respects, don't rule out a cable or other printer connection issue even if the setup was working properly before.
    stan

  • Windows 7, Manual Duplex 1200 laserjet not working, USB connection

    I just want to PRINT  Manual Duplex - Booklet - 2 page per sheet ....and it's not working. Actually it print pages, but just on one side.
    It continues to PRINT everything on ONE side ( so the printer PRINT all on SINGLE SIDE...there is no POPUP window to TELL you to MOVE printed pages into INPUT BIN, so to continue manula duplex printing)
    Sorry if my English is bad!
    in Windows XP, everything was fine....but in Win 7 Entreprise 32-bit, problem with MANUAL DUPLEX
     I try many drivers, because the WIN7 official driver is not having MANUAL DUPLEX. Non of them work
    Next thing I notices is  missing OPTION for MANUAL DUPLEX (in win7 official drivers)
    Start - device and printers - (right click on) HP LaserJet 1200 Series PCL 5 - Printer Properties - Device Settings
    Duplex Unit (for 2 - sided printing)....it say its INSTALLED (but I know that I dont have that). After Switching to NOT INSTALLED, the OPTION in driver for BOOKLET, simply disappear.
    Any advice?

    AND forgot to say,
    there is NO OPTION to SET MANAUL DULPEX (in win 7 drivers)
    I also readed your
    Vista / Win 7 Duplex Printing Troubleshooting Guide 
    but no help with that

  • Printing in TUMBLE mode not working

    hello,
    I have the problem that the TUMBLE mode does not work in my program.
    I have tested the printer with MS Word to be sure it works with my hardware and
    it succeeded.
    I use a DocPrint Object and specified the PrintRequestAttributeSet attributes OrientationRequested.LANDSCAPE and Sides.TUMBLE (=Sides.TWO_SIDED_SHORT_EDGE).
    If I change this to Sides.ONE_SIDED, the printer correctly prints each pair of sides on 2 papers (one-sided).
    If I change this to Sides.DUPLEX, the printer prints in DUPLEX mode correctly (TWO_SIDED_LONG_EDGE)
    If I change this to Sides.TUMBLE, it still prints in DUPLEX !
    If I use OrientationRequested.PORTRAIT, the printer prints always binding to the short side , like I need it (no matter if I switch to DUPLEX or TUMBLE).
    What could be the reason that the program ignores the TUMBLE attribute ?
    Here is my code:
    public static void doPrint(Print printData)  throws Exception {
                    PrintService printer = null;     
              printer = printerLookup(printerName);                         
              DocPrintJob job = printer.createPrintJob();
              DocFlavor flavor = DocFlavor.SERVICE_FORMATTED.PRINTABLE;
                    Doc doc = new SimpleDoc(printData, flavor, null);
                    PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
              aset.add(OrientationRequested.LANDSCAPE);               
              aset.add(Sides.TWO_SIDED_SHORT_EDGE);
                 job.print(doc, aset); //print
    }

    Yes, it's not a permission issue. And it only happens on this one machine too. No error messages in any of the log files. This is a real tough one. I'm tempted to think that it might be a graphics driver issue. The machine with the problem is a 2008 Mac Pro with a GeForce 8800 GT. So if anyone with a similar configuration could test it I'd at least have another hint for what's going on.
    As an interesting sidenote, other capture applications like Voila work fine, which makes the graphics driver theory unlikely, but well, I'm running out of possible causes.
    Thanks,
    Jazz

  • Print to video HDV not working

    I'm having problems with printing my HDV project to the camera.
    On a DV project it works, but when I open my HDV project I cannot choose any external video options,
    I can log and capture, but not the other way.
    I read that the edit to tape function does not work in HDV, but printing to video should.
    Just don't know how
    Maybe someone can help me
    Thank you!

    If it's a sony camera involved, select the "Easy Setup" that matches the sequence setting... like 1080i for example, and see if this doesn't clear things up. Make sure the camera is in VTR mode as well. If it's not a Sony camera check the settings it uses here: http://www.apple.com/finalcutstudio/resources/devicelist.php
    Jerry

Maybe you are looking for