Printing Employee Pay Slip using HRFORMS

Hello Experts,
I am working on a smartform for printing employee pay slips/remuneration statments using HRFORMS config.
I am trying to print the payslip checks using this and in the smartform, I have a problem with printing the check footer data using MICR font.
I read the Note 94233 - Support of MICR font. I have both MICR_C 10.0 Point Bold=Off, Italic=Off
MICR_E 10.0 Point Bold=Off, Italic=Off configured, and it does not work. I also have the required setting for the output device in SPAD.
While I try to print C &bank number&C A&bank_account_number&A, it literally prints C and A instead of the special MICR characters for C and A.
Anybody came across any such problem before and found any solution to this?
I appreciate if you can reply with your solution, will realy appreciate it.
PS: I am using Smartforms for printing the forms here.
Thanks in advance.
Shivani.
Edited by: Rob Burbank on Sep 22, 2009 4:03 PM

Hi,
The problem is resolved .
Regards,
Tanuja

Similar Messages

PE51 - Displaying LTA Balance Pending in Pay Slip

Hello ,
I have created a new Pay Slip Using transaction PE51. In that Pay slip I have to Display LTA Balance pending with that employee for this year which he/ she can claim. I tried to find Wage type for it , but I was unable to.I hope their is no wage type to find LTA Balance pending.
Now how could I display LTA Balance pending in my Pay Slip.
Please Help.
Thanks in advance.,

Create a LTA balance wage type and by writing rule pass amount into wage type and then assign wage type in payslip

Print pay-slip on double-sided

Hello,
We would like to print pay-slip on both side mode (we use ABAP list with report RPCEDTF0).
The print is Ok but the problem is that, on the same page, there are pay data for an employee on the side and pay data for an other employee on the other side.
My question is : how to do to add a jump (new page) after each employee ?
Is it a standard option and how to implement it (ABAP, form) ?
Examples could be help me.
Thanks in advance for your answer.
Daniel.

dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu

Printing remuneration statement (Pay slips) in the portal

Good Morning.
I have the following request.
I want that the employee can display the remuneration statement (Pay slips) or (receipt of payroll) in the portal.
There is a service standard in the ESS for do this customizing.
What are the steps to do this?.
Kind Regards,
Sanew2

Hi,
The salary statement is either a Pe51 form or the HRFORM. Whichever it is, it needs to be added to the 'HRFOR' feature e.i, the form name needs to be added and the feature needs to be activated. Then the same will be displayed in the portal.
Secondly, there is another BADI, 'XSS_REM_INTERFACE' which needs to be implemented.
Then from here you can configure the settings for printing the salary statement from the portal ( the method DEFINE_PRINTBUTTON_STATUS in the BADI mentioned above needs to be activated, the button needs to be enabled) and then the MASS printing configured.
Regards,
Pinki

How to Print Employee Photo using Smartform

Dear All,
I have requirement to print Employee photo using Smartform.
Here I want to give breif backgorund to uploading employee image procedure,we are uploading employee Image using transaction code OAOH by providing Business Object PREL and Document Type HRICOLFOTO. Click on create button on second screen by providing employee Code XXXXXXX and infotype 0002 after click on enter button system ask path for uploading image file.After storing image we can see the employee image by using transaction code PA30 after passing employee code.
These employee image I want to print in Smartform layout.If any body have done this type of the requirement.Pl.explain me .
Thanks ,
Regards

Hi ABAP Programmer,
Refer this link
i want to retrieve a photo image of an Employee to display in smartforms
Regards,
Sravanthi

Confirm using BAPI_PRODORDCONF_CREATE_TT does not print Goods Receipt Slip

We are having issue when perform co11n confirmation, goods receipt slip prints out fine, but calling BAPI_PRODORDCONF_CREATE_TT using the same production order/operation does not print the Goods Receipt Slip. The automatic goods movement works fine with BAPI & co11n.
Has anyone else had this problem?
Thanks
David

Nagarajan,
We have been using this BAPI in production environment for over a year now and basically it has worked just fine. From what I understand, the Goods Receipt Slip has never printed when using this BAPI, but since we only had small areas that were using this BAPI (until recently), these areas either did not need the printed Goods Receipt Slip or a Warehouse was specified, so a Transfer Order was produced instead of GRS.
I was thinking maybe we were not populating one of the BAPI input fields properly, but not sure which one it would be. We currently do not populate the "Posting Date" input field, so thought I would try populating that.
To answer your question, yes, we do the commit work.
Thanks

Printer initialization for Pay slip

Dear All,
For our project, we need to create new page format for Pay slip report.
Widht: 8 in
Hieght: 6 in
We don't know about command that we have to defind for this format in Printer initialization.
We know that if report format is A4, we can define command \ep44; in Printer initialization.
For report size 8x6 in., we didn't know commnad for it.
Would you please advise ?
Thank you very much,
Anek.

Hi Anek,
Please co-ordinate with your abaper he will inform you.
Regards,
Anil

Designation on Pay slip

Hi Friends,
Please guide me "How can I show the employee designation on Pay slip"?
Where as of now currently it displays only emp group & emp sub group on Pay slip but not designation.
Job I taken as an M9 & Position: Officer
Emp group: Regular & Emp Sub group : M9
How can I proceed?
Thanks a lot for your timing,
Points can be given to the correct solution.
Kind Regards,
Saisree.S

Hi SAISREE,
For this u need to modify the remuneration form, copy the standrad form and make your own, Now suppose u don't need the employee group then remove it. In place of it add text module Position and in place where position no is printed, include PLANS (position ) field and in conversion choose 01 (Replace key with text) .
Path for the same is PE51-> enter the form name -> go to singfle fields(change mode) -> remove the text for emp grp and add text for position -> Now dbl click on the emp. grp printed , change the table to "P0001" and table field to "PLANS" conversion field as 01 and also adjust the output lngth.
This will solve your problem.
Regards,
Tomesh

Mid month period not being calculated in pay slip

Hi Experts,
Mid month period given in 0008 is not being calculated.
e.g. if i hire some one on 16.01.09, then 0008 data should be calculated for those days only (e.g. 16 days) in pay slip. But in my case it is taking full amount of 0008.
Can any one kindly help, pl.
thanks
Balu

Dear Sikindar,
thanks for the replay.
PCL 1 and PCL10 are having 3 and 1 respectively.
checked the control record and the pay roll area of that employee and generation of pay roll periods are available in V_T549Q.
please guide me further
thanks
Balu

Hr: Pay-Slip Layout Change

Hi Guys,
This is Prabhu from Pepsi, india. I am new to SAP-HR(ABAP).I have a requirement to chanhe the layout Format of pay-Slip.
That is :
In place of Company Code, i have to Display Emp PAN Number.
In Tcode: PE51 , i am trying to change that fields(Company Code) to PANnumner fields.But i am unable to find relavent table in the table list of the Form.
1.How can i do ?
2. We r using Standard form itself.
3.if there any way to include new Fields in that.
please give me some Inputs .
regards
Prabhu
technical Consultant-team SAP
PIH
Gurgaon
[email protected]

Please specify you are taking about the renumeration statement or payroll check
1. if renumeration statement then you can go to PE51 eneter the molga as 10 and then your form name
2, if payroll check then might be sap SCRIPT or smart forms is used for desining the layout of check.
Thanks

BEST PRINTER TO PURCHASE FOR USE WITH IMAC OSX LION V 10.7.4

I NEED TO KNOW WHAT PRINTER IS BEST TO USE WITH IMAC RUNNING OSX LION V 10.7.4. THERE WERE NO SUCH THINGS AS COMPUTERS WHEN I WENT TO SCHOOL. I AM A NEW APPLE/MAC USER. SO PLEASE I AM IN NEED OF A ALL-IN-ONE IF POSSIBLE BUT IF THERE IS SOMETHING THAT IS VERY EASY TO USE WITH IMAC OSX LION 10.7.4 AND A USB CABLE THATS OK TOO. THE CATCH IS MY PRINTER DIED SO IT NEEDS TO BE PURCHASED AT WALMART TONIGHT. SO I NEED SEVERAL POSSIBLITIES PLEASE HELP THANKS, JDLASK

JDLASK wrote:
I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
Thanks
Pete

BAPI_GOODSMVT_CREATE: printing GR/GI slip

Hi everyone,
I need to print the GR/GI slip using BAPI_GOODSMVT_CREATE.
There are two fields in header structure (GOODSMVT_HEADER) to fill:
     VER_GR_GI_SLIP
     VER_GR_GI_SLIPX
I have filled the first one for example. with 1 (for individual slip) and set X on the second one but it doesnt work.
Using the parameter NDR like
     (DATA l_ndr TYPE c VALUE X.)
     SET PARAMETER ID 'NDR' FIELD l_ndr.
before calling BAPI doesnt work either.
When I set the parameter-id using transaction su01 (user maintenance) the BAPI prints permanently regardless of wihich fields are filled or not filled. I need the printing only if it is required.
Any ideas? Thank you.
Regards,
Kai
P.S.: If it is necessary to know: The print flag by transaction 'mb01' works correct.

You may check SAP note 520813
12. Question:
What do I have to keep in mind if I want to trigger the print output of a goods receipt or goods issue document when I execute the BAPI?
Answer:
You must make sure that a user name is transferred in the PR_UNAME field in the header structure. This user is used for determining the print parameters. You must set the value 'X' for the 'NDR' parameter ID for this user. Make sure that all customizing-related settings have been made for this user.
The GOODSMVT_CODE import parameter is relevant for the print version. The transaction code is derived from this code (see table T158G, for example, code 04 stands for MB1B). The BAPI uses the print version that is assigned to this transaction for the goods receipt/goods issue document. This is customized in transaction OMBR. Check your Customizing and make sure that you have assigned a print version to this transaction and that a conditional output record exists.

Trying to print photos from iPad using iPrint to to my Photosmart c4795.

I have been trying to print photos from iPad using iPrint to Photosmart c4795. keed getting error message "not enough memory to complete operation".

If you power your ipad down then turn it back on that should fix the issue
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

How to create a pay slip in SAP

Hi,
I am new to SAP, I would like to know how to create the pay slip in SAP. Please provide me the detailed explanation on the same and it would be helpful if you could send the screenshots step by step.
Regards,
Vinayaka.

Hi Vinayaka,
You can use PE51 transaction.
I advise you to copy the standard remuneration statement for your country grouping and change accordingly.
Moreover, pls refer to the following links for further info.
https://forums.sdn.sap.com/click.jspa?searchID=21265681&messageID=5798149
http://www.esnips.com/doc/1def7d8a-0fbd-4b72-82ef-c5ac2108710c/HR-Form-Editor-
Regards,
Dilek

Pay slip spool creation problem

Hi All,
Is there an option in SPRO to specify NO SPOOL creation for salary statements?
We are on ECC 6.0, BP 1.2, ESS 603.
If not is there any other option to not create any spool for pay slips?
Thanks
Vinay

May be you can give a try.....
Under spro node, perform Provide Salary statment as PDF in Internet --->> Edit Feature EDPDF.
Here, in decision tree, use the return value -
$CEDT$.

Printing Employee Pay Slip using HRFORMS

Similar Messages

Maybe you are looking for