Printing envelopes on HP 8600

I need to print addresses on different size envelopes e.g. No. 10 envelopes; Greeting card envelopes etc. How do I set up my HP 8600 Printer to adjust for the size of envelopes?
This question was solved.
View Solution.

Thank you for this updated information.
I understand your neighbor wants to print envelopes using the Hallmark Cards Software. I found a document on How do I print an envelopes using Hallmark Software.
Also, I am going to provide the HP Officejet Pro 8600 e-All-in-One Series Printer Series Product Specifications. Please click on "Paper-handling specifications", then click on "Supported Envelopes sizes". This document states what sizes are supported for your printer.
Please let me know if you have any further questions. Have a great day!
I worked on behalf of HP.

Similar Messages

Printing envelopes on officejet 8600 from Endicia, OSX

I've used endicia for years, and my previous three HP printers worked fine. My new OJ 8600, however, refuses to line up correctly on the envelopes. The print is waaaay off to the right, and if I change the printer setup in endicia (as their tech support suggests), I can move the document print partly to the left, but the return address on the envelope becomes cut off long before the "to" address has moved enough to me acceptable.
I tried changing the feed setup inside endicia to all the way to the left, instead of centered, hoping that this would fool the HP, but the printer refused to print, telling me that the paper isn't lined up properly for that alignment.
I'm stumped. Endicia is stumped. Any help?
Thanks!

I have the exact same problem
endicia wants you to use letter size instead of envelope
but hp 8600 will then reject paper type and not print

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to print envelopes on the HP OfificeJet Pro 8600,

Hi there folks;
Recently I ran into several folks asking on how to print envelopes in the same printer The HP Officejet 8600
Do to this I decided to provide both the instructions in this document as well as the links of the article where I refer to for the information. This way folks that want to have it quick and to the point can accomplish this by reading and following this article and any folk that want to dig deeper perhaps the article will provide more in depth information
This is how to load the envelopes;
I will provide the link of the Article where this information have been gathered from;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02890475&cc=us&dlc=en&lc=en&product=4323648&tmp...
Here the steps for loading the envelopes on the Officejet pro 8600.
Grasp the handle on the front of the input tray, and then pull the tray towards you to open it.
Figure 12: Pull out the input tray
Slide the paper width guides out as far as possible.
NOTE:If you are loading larger-sized paper, pull out the tray extension to lengthen the tray.
Figure 13: Input tray extension
Insert the envelopes into the center of the tray with the envelope flap on the left and facing up. If the flap is on the short end of the envelope, insert the envelope into the center of the tray with the flap toward the product and facing up.
Figure 14: Load envelopes
Slide the paper width guides in to rest against the edges of the envelope. Make sure that the envelope is centered in the tray.
Push the tray into the product until it clicks into place.
Figure 15: Push in the input tray
Pull out the tray extender on the output tray.
Figure 16: Pull out the tray extender
This is the explanation on how to load envelopes into the 8600. Hope is helpful
Now let’s make sure that the envelopes use are supported by the printer,
This article will also provide you with envelopes support by this printers;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lc=en&product=4323648&tmp...
Is an important to properly load the envelopes as to use only envelopes supported by the printer.
you might spend countless hours trying to figure what is the problem without realizing that the issue is the envelope you are actually using is not supported.
Here is a list of the envelopes supported by the Officejet 8600
Paper type
Paper size
U.S. 10 envelope
105 x 241 mm (4.1 x 9.5 inches)
A2 envelope
111 x 146 mm (4.4 x 5.8 inches)
DL envelope
110 x 220 mm (4.3 x 8.7 inches)
C5 envelope
162 x 229 mm ( 6.4 x 9.0 inches)
C6 envelope
114 x 162 mm (4.5 x 6.4 inches)
Monarch envelope
98 x 191 mm (3.9 x 7.5 inches)
Card envelope
111 x 152 mm (4.4 x 6.0 inches)
Chou #3 envelope
120 x 235 mm (4.7 x 9.3 inches)
Chou #4 envelope
90 x 205 mm (3.5 x 8.1 inches)
Hope this is helpful.
I welcome any comments and questions;
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
This question was solved.
View Solution.

On my OJ Pro 8600, When I go to print a # 10 envelope, it feeds the envelope through and then prints the address on a letter page. I was forced to set the printer preferences to #10 envelope, and within Word, set the paper type to # 10 envelope, set Word up for center feed, and then put everything back to print normally. ON my 6500 all I had to do was hit print. There must be a way to print single envelopes without jumping through all these hoops!!

Printing envelopes on HP Officejet Pro 8600

I discovered that if you go to "Set Preferences" then select "Paper/Quality" then under "Paper Size" select "Envelope #10". Next apply that change and exit. Then follow the Officejet Pro example of how to insert envelopes into the printer tray. I use Microsoft office 2007 Word to print envelopes. So I indicate that the envelopes are centered in the tray and select the proper envelope size here also. Then I print the envelope addresses. End. Leaving the setting at "Envelope #10" in "Set Preferences" does not seem to affect normal printing.

Go to the 8600 Printing preferences, select "Paper/Quality" then under "Paper Size" select "Envelope #10".
Apply that change and exit.
Using Microsoft Office Word to print envelopes.
Select the envelopes are centered in the tray option and select the envelope #10 size.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Envelope wont print on Officejet Pro 8600

why will my Officejet Pro 8600 not print an envelope using Windows 7 and Word 2003? It acts like the envelope prints then spits out a blank envelope and prints the info on the next sheet of paper.

Hello there! Welcome to the forums @Deano737
I understand you're having troubles with printing to your Officejet 8600 Plus and setting up scan to email to your Mac, running Yosemite. I have some ideas in mind to offer you that may help.
Here they are. In order try:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the Full Feature Driver here: HP Officejet Pro 8600 series Full Feature Software and Drivers
Also, download the Apple driver: HP Printer Drivers v3.0 for OS X
Now try setting up scan to email and scanning through the HP scan software, and printing.
Keep me posted with the results!
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have the HP Office Jet Pro 8600 which is dificult to use for printing envelopes .

I bought an HP 1010 small printer [not wireless] which I want to dedicate for printing envelopes only. It is not wireless. How can I connect it so that it will show up for selection for envelopes only? I have it connected to the PC with an UBS
whereas the 8600 is wireles.

Hi @Abinadi,
Welcome to the HP Forums!
I noticed you are trying to use your HP 1010 for printing envelopes only. I am happy to look into this for you!
The easiest solution is to load the printer with envelopes, and then to just select that printer when you go to print. You will need to choose the paper type each time you print though, depending on the program or Operating System.
So I can look into this further, could you please reply with the following information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
The name of the program you are printing with.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I cant print envelopes form my hp 8600]

I have a new HP 8600 printer. When I try to now print envelopes in Word 2011 the information doesnt transpose to the printer.

Hi.
Try the suggestions here > Printing envelopes on the Officejet 8600 Pro. - HP Support Forum - 1058183

How to Print Envelopes - HP LaserJet Pro 200 color MFP

I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.
I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!

Hi goodgrandma ,
I see by your post that you would also like to know how to print envelopes.
I will be happy to help you.
Both the Laserjet m251 and M276 have a main tray only.
Above the tray is the jam access door to remove paper jams.
To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
What is the full name and product
number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I print envelopes for everyone in my address book?

How do I print envelopes for everyone in my address book? It seems so simple but after half an hour... no joy!!

I have spent most of the morning in a frustrating search of a way to print labels for my contacts. I have a couple of problems. I want to send every label to a different person at the same address. I have hundreds to do and most of them do not have a mailing address so I tried to do a bulk change of the address ... without manually changing every contact there is no way to do this. I've tried to create a template with a table (10x2) and added merge fields to each of the cells but when I do a mail merge all I get are hundreds of pages with a page dedicated to each contact whereas I want to merge on a cell by cell level, i.e. 20 different contacts on the same page.
How do I do this? I can't find label style that is appropriate and I'm not sure how to create one with 10 by 2 labels per page.
Help!

Why doesn't my HP Photosmart Premium All-in-One print envelopes - of any size?

I have recently installed two of these printers (in two different locations, one prints envelopes fine, mine doesn't)

Hello,
Thanks for the post. We may have a couple of issues here, were you able to sucessfully download and install the drivers on your system? Are you using the correct printer in your print and fax? Since you can print color sucessfully from two other PC's, I would suspect a setting on your MAC. I've included a link below where you can download the drivers for this product. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=37936... (driver download page)
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP 2025/XP: Error Message when printing envelopes wider than long

Is there any way to print envelopes wider than long (e.g., A2 through A7) without getting the error message "Unrecognized Paper" and encountering long cleaning cycles between each envelope. I prefer not to feed envelopes end-ways as they tend to gather due to the paper layers. I have had some success in using cut-to-size card stock under the flap (secured with a post-it) to make the printer "think" that the envelope is longer than wide, but this is time-consuming as well. Thanks for any help.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??

Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??
Thank you

Hi,
Which application are you using ? Under Word, you can check it yourself using Print Envelopes as shown:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to print envelopes hp laser jet pro mfp m225dw

Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw? Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

Hey @Shaggs,
I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
Loading Plain Paper and Envelopes
Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
What's my OS?
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face up' option.
8. Also ensure that 'Clockwise Rotation' is not selected.
9. Hit 'OK' and 'print'
Here is a video for additional instruction:
Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printing Envelopes Other Than #10 with HP LaserJet 4240 Envelope Feeder

I'm trying to use an HP LaserJet 4240 and an HP 75-sheet Envelope Feeder to print envelopes from FileMaker Pro. HP's specifications for the envelope feeder note that it accepts "various sizes of envelopes." However, we are unable to specify any size other than #10 envelopes in the print dialog box. #10 envelopes print just fine, but choosing a different envelope size (like C5) in Page Setup and attempting to print brings up an error message saying that only #10 envelopes can be printed and asking if the document should be scaled to fit that size envelope. If you agree and continue printing, the printer shows "Service Error" on its display.
The workaround I've used so far is to put text out to the very edge of the #10 margins in FileMaker and just load larger envelopes. This leaves too large a margin, however, and I'd really like to be able to print to the actual size of a C5 envelope.
I've tried specifying a letter sized sheet of paper and setting the paper feed to "Envelope Feeder" but the printer is smart enough to know that letter paper can't go through the feeder and asks to specify a different tray.
Has anyone succeeded in specifying a custom envelope size that will print via the envelope feeder? I don't want to have to manually feed envelopes into the printer as that's why we purchased the envelope feeder in the first place!
Thanks in advance for any suggestions anyone can offer.

try this FREE little widget - it's the best solution for printing all types of envelopes …
http://www.ambrosiasw.com/utilities/easyenvelopes/
Alan

Printing envelopes on HP 8600

Similar Messages

Maybe you are looking for