Printing envelopes with HP Officejet Pro X576dw

I want to print individual addresses on envelopes. I have followed all tjhe instructions including loading the tray 2 with envelopes. Every time I ask to print, I get a notice saying that I need to put the paper into the tray before printing. Bloody obvious really. I have done on numerous occassions today, checked all my setting over amnd over again but get the same old message, no paper in the trat which is BS. Can anyone help, I have a lot of envelopes to print.
genpat

@genpat 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • How do i print address returns on envelopes with hp officejet pro 8500

    how do i print address returns on envelopes with hp officejet pro 8500

    This is done with your software that you have to print the envelopes.   MS Word can do this, just use their help facility.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Iphone e print/air print issues with HP Officejet Pro 8500 Premier All-in-One A909n

    I downloaded the 4.2 upgrade for iphone thinking I would be able to print from my HP Officejet Pro 8500 Premier All-In-One A909n.  I have upgraded the HP firmware.  I have turned my printer on and off.  I get an error message that says "No printer found."  I am not able to contact HP due to my warranty being expired--even though I bought the extended warranty from the store.  Please help.  Thanks!

    This printer is listed here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N46...
    has offering eprint.  However, some community messages say that it does not work.
    I have not been able to get an email address set up for the printer, or to figure out whether or not it is web services enabled.  
    It does not have the icon on the touch screen that is shown in the hp instructions.
    Any clues out there?

  • Printing envelopes on HP Officejet Pro 8600

    I discovered that if you go to "Set Preferences" then select "Paper/Quality" then under "Paper Size" select "Envelope #10". Next apply that change and exit. Then follow the Officejet Pro example of how to insert envelopes into the printer tray. I use Microsoft office 2007 Word to print envelopes. So I indicate that the envelopes are centered in the tray and select the proper envelope size here also. Then I print the envelope addresses. End. Leaving the setting at "Envelope #10" in "Set Preferences" does not seem to affect normal printing.

    Go to the 8600 Printing preferences, select "Paper/Quality" then under "Paper Size" select "Envelope #10".
    Apply that change and exit.
    Using Microsoft Office Word to print envelopes.
    Select the envelopes are centered in the tray option and select the envelope #10 size.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Printing duplex with HP Officejet Pro 8600 causes windows 7 OS to shut down/restart

    Why when printing duplex with my HP Officejet Pro 8600 printer it causes windows 7( 64-bit) to shut down/restart. Windows message is "Windows has recovered from an unexpected shutdown.  I've ran HP Hardward Diag. Utility and Print and Scan Doctor which indicated everything is working properly with the printer.  Ocassionaly I can print duplex without windows shutting down and restarting, but most of the time it creates issue with Windows causing it to stop and restart.  Single sided printing seems to be fine.  I've already oncehad windows to "Startup Repair" in which ccase I selected restore to a previous working point.  Everything worked for awhile then a duplex printing session starting causing windows to shut down again.   THanks for your assistance.

    Yes, the updated USB 3.0 driver corrects the issue and should be installed.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Current update has intermittent problem of printing gibberish with HP Officejet Pro 8500. No problems before most recent update.

    Even in Print Preview will show as gibberish--and print as gibberish. If repeatedly open document to print, suddenly it Previews & Prints correctly.

    Have you moved the paper guides to properly align the envelopes?  I do not see how envelopes can be loaded in any position but the center with the paper guides set snugly.  See page 42 (46) of the manual here.  Also, if you have the optional second paper tray note that envelopes are not supported in it, you need to use the top tray.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Duplex Printing Bug with HP OfficeJet Pro L7680

    Well - Duplex printing works but the back page will only print with binding on the top, Binding on the side does not work! Minor bug but still a bug at least with the HP!!

    Kev,
    A couple of points - assuming your using the HP OfficeJet Printer - I am assuming your connecting it via the Ethernet point which means it is communicating via IP. That being said - here is what I ran into.
    When I first added the HP Printer - Leopard wanted to configure the printer via BONJOUR. I went ahead and let it do that - however printing was terrible!!!! I could send jobs to the printq, but the only way they would print was if I turned the printer on/off again - and the the would magically start printing. Then the printer would go "offline" and I was forced to do this same on/off routine.
    So - I went back into add printers - and let the dialog box sit there for a little while and all of the sudden the list updated with an HP2A7180 - Kind - IP. I selected this printer and then told it to use the HP driver via the Print Using - drop down selector and my HP has been working fine since (minus the duplex).
    Additionally it installed an configuration utility which allows me to monitor inks, settings and such.
    Hope this helps - Bill

  • PDF printing errors with HP Officejet Pro 8000

    When printing from FireFox PDF preview I always get a print feed jam error when printing the last 2 pages pages using double sided printing. There as been several documents that fail to print correct characters when using the HP (prints correctly using my Epson 88+).
    Firefox version 30
    Windows 7 SP1 (home and PRO), all drivers and Windows up to date.
    Printer is networked using Linksys E2500 router

    hello,
    please try this.
    The 29.0.1 firefox solved my problem!
    Please check: Firefox---> Preferences (options)---->applications tab---->Portable document Format (PDF)----->Preview in firefox
    Good Luck!
    regards,
    GAUTAM SHARMA.

  • Can't scan to 1 Mac in the office with HP OfficeJet Pro X576dw MFP

    Hi, We recently moved offices, and after getting to the new location all computers have been able to connect to the Network printer in the office for printing and scanning.  We have both PC and Macs in the office and all are working fine. One of the Mac computers is able to print, but none of the scan options are available. Running Mac OS 10.10.4, have run all the Mac updates and have deleted and reinstalled the printer software.  Any help is appreciated.

    Try updating the software by following these steps:
    First ensure the printer is powered on and connected to your Mac or to the same network.
    Click the Apple icon, then select About This Mac.
    Click on Software Update, then click the top Store menu of the shown window and click on Reload Page.
    Be sure to install any HP or Apple update, then check for any difference.
    If the same persists, manually try installing the package below:
    http://support.apple.com/kb/dl907 Finally, if you are still not able to scan try the HP Easy Scan app and check if that may allow scanning:https://itunes.apple.com/us/app/hp-easy-scan/id967004861?mt=12 Regards,Shlomi

  • Problems with hp officejet pro 8610 printing labels

    I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.

    Hello ,
    Welcome to the HP Support Forums!
    I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
    Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
    You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
    I hope this helps,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Pavilion dm4-1160us not interfacin​g with HP Officejet Pro 8500 A e All-in-One Printer A910a

    HP Pavilion dm4-1160 us Entertainment Notebook stoped pring with HP Officejet Pro 8500 A e All-in-One Printer A910a
    Operating System is Microsoft Windows 7 Home Premium (64bit) Service Pack 1
    How do I get the printer working again?

    Hello white2012.
    It would help knowing how the printer is connected to the computer (USB, Ethernet cable, Wifi).
    Is there any error message shown in the computer or in the printer?
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • Printing with HP Officejet Pro 8500 A909n Series Printer & Apple Air Print

    I am trying to use my IPad and print from it through Air Print.
    Has anyone had any success in printing from an IPad, using the latest Apple IPad operating system (iOS 4.2) to an  HP Officejet Pro 8500 A909n Series Printer?
    The documentation from Apple indicates compatibility with:
    HP Officejet Pro 8500A e-AiO HP Officejet Pro 8500A Plus e-AiO HP Officejet Pro 8500A Premium e-AiO
    Will  the 8500 A909n work?
    Thanks.

    Hi,
    Airprint is not supported for HP Officejet Pro 8500 A909m Series.
    Thank you.
    I am an HP employee
    **** Please mark the post that solves your problem as "Accepted Solution" ****

  • Trouble Printing with HP Officejet Pro 8500

    Hello - I recently changed my laptop and have a Windows 7.  I went online and downloaded the software and am able to do a test print page with the Print Doctor.  However, when i print from my laptop and select the correct printer, it doesn't do anything or respond with printing.  I was able to install and have it work with my old laptop, i just can't seem to work it on this one.
    Thank You

    Hi @Vanessasood,
    Thank you for visiting the HP Support Forums!  I understand you are having trouble printing to your HP Officejet Pro 8500 with your computer running the Windows 7 Operating system. I would love to get you up and running but require a little more information:
    1. What is the Exact model of HP OJ 8500 you are using as there a few in the series?
    2. Did you recently upgrade to Windows 7?
    3. How is the printer connected, USB or Wireless?
    4. Do you get any error message when you attempt to print?
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I am a studio graphic designer needing to purchase a color jet printer to handle small business takes.  I am trying to decide on the Epson WorkForce Pro WP-4530 All-In-One Printer  OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelop

    I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer  OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).   
    Do you have any recommendations?

    I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer  OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).   
    Do you have any recommendations?

  • Can i or can i not print a 6.75 x 4.75 envelope on my officejet pro 8600

    quick and simple can i or not print a 6.75 by 4.75(or any custom size not listed) envelope on my officejet pro 8600

    Hi,
    Quick answer: can't - it supports the following list (page #164 of its manual):
    Envelopes
    U.S. #10 Envelope (105 x 241 mm; 4.12 x 9.5 inches)
    Monarch Envelope (98 x 191 mm; 3.88 x 7.5 inches)
    Card Envelope (111 x 152 mm; 4.4 x 6 inches)
    A2 Envelope (111 x 146 mm; 4.37 x 5.75 inches)
    DL Envelope (110 x 220 mm; 4.3 x 8.7 inches)
    C5 Envelope (162 x 229 mm; 6.4 x 9 inches)
    C6 Envelope (114 x 162 mm; 4.5 x 6.4 inches)
    Japanese Envelope Chou #3 (120 x 235 mm; 4.7 x 9.3 inches)
    Japanese Envelope Chou #4 (90 x 205 mm; 3.5 x 8.1 inches)
    The closet one is C6.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for