Printing error with Elements 10

When I print a single 4x5 image on an 8.5 x 11 sheet of paper, the entire sheet, less the eighth inch margins, receives an almost invisible layer of color. Where is the dialog box generating the instruction to print this background and how do I disable it?
Thank you. Both Elements 3 and 6 used on the same printer, an Epson 2200, would simply print the image.
williams19

Turns out to be in the Elements 9/10 software. The instruction to the printer when printing from PSE10 accounts for the entire sheet of paper being printed on regardless of the actual image size and as such deposits at least some ink over the entire sheet. There is no way to alter this in set up. It must have been expedient to write the code this way. I better stock up on light cyan.
Printing the same image from Mac Preview, using Epson color management, only the image is printed.
An aside- I find it telling that when talking to Adobe that they now consider 4 x 5 to be a custom size. Priceless.

Similar Messages

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Printing Error with Canon MF6500

I'm trying to print with my Canon MF6500 but I keep getting a printer error saying that there is an error in the connection. The strange thing is that it was working fine a couple days ago. Here are a few things:
Things I've Done:
-printed using another macbook with the same USB cord (worked)
-uninstalled and reinstalled ALL printers (did not work)
-downloaded the driver from the canon website (did not work)
-used multiple USB cords
Things that might have caused the problem:
-Used a Canon Pixma iP1800 to print
-Used a HP photosmart C1300 to scan and print
another thing to note is that when I install the printer it doesn't automatically detect the software anymore, I have to select the proper printer driver (Canon MF6500 UFR II)

anguonly wrote:
Maybe the process "UFR II BackGrounder" is the problem but I don't want to shut out something important
The Backgrounder service provides communication between the UFR2 driver and the Mac. If this service fails to run and connect to the printer then it will cause errors, such as the one you are having. You could look at stopping this service, it will restart by itself, or restarting the Mac will do the same.
With all that you have done so far I suggest you look at removing the UFR2 driver and associated files and then install v2.21 again. First remove the existing MF6500 printer queue in Print & Fax. Then trash the following files;
System Volume/Library/Printers/Canon/UFR2
System Volume/Library/LaunchAgents/jp.co.canon.UFR2.BG.plist
System Volume/Library/Printers/PPDs/Contents/Resources/CNTD**Z*2.ppd.gz
Where * indicates a character string that represents the printer model, and 2 indicates a character string that represents the corresponding language.
Then restart the Mac and install the v2.21 UFR2 driver.

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Printing error with t-code j1inmis: Can not find PDL type for output device

Hi,
When using tr.code j1inmis,when we seeing the print preview iam getting below error.
The error with my system show the details as follow :
Cannot find PDL type for output device LP01.
My system is only abap stack.Guide me for the same how to resolve this.
Thanku

Hi,
When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
When I check The Test : FP_TEST_00 iam getting below error
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
But
When I check The Test : FP_PDF_TEST_00 its working fine.
And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
When i check with destination iam getting error : SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
Thanku

Printing Problems with Elements 11

I have just started with Elements 11. At first it printed ok. but when I tried to set it up with Elements to control the printer ( Epson SX400 ) I keep getting a message saying that ICC Profile is invalid, and the program will not let me print at all. My computer O/S is Windows 7, 64 bit. the Printer driver is one supplied by Epson EU to run the O/S.
I have tried returning to Printer controls settings, this has not worked. I have tried to print on a different printer (Brother HL-2250DN Laser Printer) this will not print either.
I have tried to print on my old Serif PhotoPlus program this is OK. So the problem is in my settings for Elements 11,
Do I Need to Reinstall the programme
Andy H

I would explain you the steps you need to follow if you are giving control to Photoshop Elements to manages color.
Step 1- Select your printer and then Click More Options at the bottom left of the Print window.
Step 2- No click on Color Management tab.
Step 3- Now from "Color Handling" drop down select Photoshop Elements Manages color. As you select this option "Printer Profile" drop down will become enable.
Step 4- If Image Space is sRGB then select sRGB profile from Printer Profile drop down else select Adobe RGB.
Step 5- Click On Printer Preferences button. It will open your printer's preferences dialog.
step 6- Now click on "Main" tab and then click Advanced button.
step 7- Now under "Color Management" section please select No Color Management here.
step 8- Click OK and come back to main Print dialog of Photoshop Elements. Now click Print.
Note -If you choose Photoshop Elements manages color, it is very important that you disable color management in your printer driver.Letting the application and the printer driver simultaneously manage colors during printing results in unpredictable color.
Try with above written steps I hope it would help.
Cheers !!!

Print Problems with Elements 9 for Mac

I cannot print borderless (randlos) on format 10 x 15 (or any other) on my Printer Canon PIXMA MP970. With Elements 8 for Windows there is no problem. I have tried any possible combinations of adjustements and have the lates printer driver installed.

10 x 15 cm is a standard European paper size but the choice ist not available in the paper size selection. The choices avaiIable seem to be only American. I have to define it as user defined (Benutzerdefiniert). I have contacted Canon but they have no solution for this problem. It seems that PSE 9 for Mac and Canon printer drivers don't like each other. A least the German versions. With PSE 8 for Windows everything works fine. There the standard European paper sizes and borderless printing can be selected with no problem. As mentioned in other topics rotating is although a problem. Lucky enough I have also a Windows system with PSE 8.

Printer error with InDesign CS4

I have the Adobe Master Collection installed on Windows 7 64bit (Pruchased through MS Volume License). Before installing windows 7, the system had Windows Vista Business 64-bit installed and had the same problem, so it is not OS related. Connected directly to the computer via USB cable is an HP Design Jet 130. All programs are able to print to it without any problems including Photoshop (64bit), Adobe Acrobat, Illustrator (32bit), Excel, Word, etc. However, when trying to print a document from InDesign, I get the following error:
print driver host for 32bit applications has stopped working
After click ok, the printer selection box comes up, with the post script printer selected. When you go and try and change the printer to ANY other printer including the DJ130, I get the following error:
Printer selection failed. Restoring the previous selection.
I am still able to print documents from InDesign by saving them as a PDF and then opening them and printing them with Adobe Acrobat Pro, however, I should not have to do this, and this can become very time consuming. The printer is also shared on the network with two other computers and they have no problem printing to it from InDesign. Before I installed Windows 7, I completely un-installed the Master Collection. After Win7 was installed, I re-installed the Master Collection, and I was able to print perfectly from Adobe InDesign. It seems that one of the updates breaks it's printing capabilities with this printer, or at least on this system.
Has anyone else experienced this issue, or are there any other things that I can try to resolve this? I have 8GB of RAM in the system and don't really see switching to a 32 bit OS to be an option as I would loose the ability to use 1/2 of my memory.

I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this?

Printer Error with Shared USB printer

Greetings;
I have just installed my HP 7760 on my new G5, and I am attempting to print via shared usb to my G3 Imac which is running 10.3.9 I have used this setup lots in the past but with both MAC's running 10.3.9, Now all I get is "Print Error"!
I can see the shared printer on the G3 and select it on the G5 but it just results in a print error when I attempt to print.
Any thoughts would be most helpful

Hi Greg;
Many thanks for your interest in my problem. I have done the following;
1. Installed the latest drivers from HP on both machines
2. Removed and then added the printer.
3. Repaired permissions on both computers and restarted.
This seems to be related to 10.4.3 as I have read some references to this in other threads. Prior to the G5 with 10.4.3 I was printing with the G3'es under 10.3.9 using USB sharing with no problems. I have no problem printing from either computer when the printer is connected directly and I can see the shared printer in printer setup and have no problem selecting it however I am still getting the "print error" when printing to the shared printer.
I am going to try one more experiment, I no have the printer connected directly to the G5 with printer sharing turned on. I will try to print to it from the G3and see what happens. I will post the results when complete.
JJ
20' IMac G5 Isight Mac OS X (10.4.3) Imac 333Mhz / Imac 600Mhz

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

Officejet G85xi printer errors with Windows office 8

I recently purchased a new PC with Windows 8. I downloaded the most current drivers for my Officejet G85xi. Each time I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

I used the G85xi without issues (other than paper supply out) using Window XP on older PC. The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1. When I am lucky I get 2 full pages of print before "print error" appears. I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc. It usually will finish a text document not much more than a single page, but PDF documents are very limited. I have spent hours trying to print one 9-page PDF document. Should I ditch what was a wonderful printer? Should I ditch a new HP PC with Windows 8.1? Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing error with t-code FBCJ: Can not find PDL for output device prtloc

Hello , folks ,
The error with my system show the details as follow :
Cannot find PDL type for output device prtlocal
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Our Basis can not solve the problems .
anybody know what's wrong with it ?
Thanks a lot .

other problems could be:
C drive is full
ADS folder under C:\Temp are write protected

Printer Error with all iWork products

Hi. I don't have a printer attached tot eh computer but I want to save a document as a PDF. I can do this in all applications other than iWork applications. printer Error comes up. Anyone know how to solve this problem?

It seems a bit odd.
I'm able to do that on the iMac intel inside which I uses for trsts.
I never connected a printer to this beast and the Print to PDF feature works perfecly (I didn't try the export to PDF entry).
Sounds as a corrupted file somewhere.
You may try to trash:
Macintosh HD:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plist
CAUTION, this file contains the list of couples of strings used by the auto-correction tool.
Yvan KOENIG (from FRANCE vendredi 25 janvier 2008 22:48:10)

PDF printing errors with InDesign CS4 docs

I've discovered somewhat belatedly that since upgrading from CS3 to CS4, every pdf I have created in InDesign (a dozen or more) won't print. After a general error message, "the document could not be printed," I get one or both of these messages: "there were no pages selected to print" or "a drawing error occurred." I have variously tried every page selection option to no avail. I have also tried recreating the pdfs from the original ID files with different export settings, again with no success. PDFs exported from other programs are not a problem, nor is printing from InDesign. I'm on a Mac. Any thoughts?

My (admittedly Clonescript) HP prints this without error messages but prints in Courier anything done in Optima ExtraBlack, which claims to be embedded, but seems not to be. My PCL printer prints this without errors or problems.
If I bring this back into CS4 and export back to PDF, it prints properly in Optima ExtraBlack.
If I edit it in Acrobat 7, I can change Optima Extrablack (not on system) to Optima Extrablack (on system) and it prints properly.
I would want to look into your Optima Extrablack font. First try substituting different fonts, something generic like Helvetica (not as a solution, just as a test). If that fixes it, try substituting something generic only for Optima Extrablack (the "A House of BRIC" head and the drop folio). If that fixes it, make a document that uses only Optima Extrablack. If that fails, look into uninstalling and reinstalling Optima Black.
BTW, you don't have Reader 8 and Acrobat Pro 9 installed on the same machine, do you? This is not recommended, although I don't know what particular problems it causes.
There's quite a bit about the drawing error if you google it. In particular, this might be relevant (while somewhat off-color): http://groups.google.com/group/adobe.acrobat.windows/msg/8dc9a7dfea59a57d?hl=en&
Ken

Printing error with Elements 10

Similar Messages

Maybe you are looking for