Printing "fonts are small"

Hello All,
While printing the  FI reports(FBl5n) from SAP we are facing a problem like the fonts are small. The report is not fully using the A4 paper. The device type we are using is sapwin the printer we are using HP laserjet1018 and it support sapwin.How we can increase the font with respect to the papaersize.
Tom

Hi,
Please find the below steps I think it may help you :
Go to START --> SETTINGS ---> Printers
Right click on HP laserjet1018 ... Properties..
General Tab --> Printing Preferences --> Advanced --> Paper Size --> A4
HP laserjet1018 --> Properties --> Advanced Tab
Printing Defaults --> Advanced --> Paper Size -> A4
HP laserjet1018 --> Properties --> Device Settings tab -> Autoselect - ->A4
Key points of this solution, If the SAP spool server and the Microsoft Windows spool system are not on the same host, you must create a remote PC connection to the printer and force paper size to be A4
By the way, adjust HP laserjet1018 from "EXEC" to "A4" in Tray 3 physically too. After that print List in A4 Format successfully.
Change some attributes(ex. font name & size) in print control of SPAD followed by SAP Notes 21738.
Regards
Sreedhar Reddy.A
Edited by: Sreedhar Reddy on Dec 24, 2008 5:32 PM

Similar Messages

  • Why is the printed font so small on a print job I send from my email to my new HP Photosmart C510

    Why is the printed font so small on a print job I send from my email to my new HP Photosmart C510? I sent it via HP ePrint from a lotus notes based email account. It was just a text message but it was so small on the print out I could not begin to read it. 
    Thanks
    Matt

    At the document you plan to print, go to "file" in upper right corner.  Select "print preview".  Atop that window, select font size.  Recommended minimum 60%.  May need to adjust with different documents.
    Good luck!

  • Why ist the printed font size smaller then the choosen font size in pages

    Hi,
    sorry about my english it´s a lot of years agoo i used it.
    since a cuple of months i choosed a mac mini to be used as my favorit pc-system. Now i am using pages to create letters and stuff like greeting cards, posters, flyers and so on.
    In this i´ll find a problem between the choosen font sizes and the printed paper.
    If i choose a font and size like arial 12, and start the print job of the lettert with my Printer (Samsung 3170 MFC or Samsung 315), the size of the printed font is very smaller than the in pages choosen font (seen on the screen.
    If i use MS offce it is the right size on the screen as on the printet paper.
    What do i wrong?
    Greetings from Hamburg Germany

    Maybe because your document isn't displayed at 100% but at 120% on your screen.
    On my iMac, to get the same size on screen and on paper, the zoom factor must be 142% which can't be done thru the available interface.
    Yvan KOENIG (VALLAURIS, France) dimanche 3 juillet 2011 12:43:09
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • HT2513 ICal works great but the fonts are small and hard to read unlike Outlook. Any suggestions?

    I have a MacPro and use ICal. I loke OUtlook because I can see it better and it is frankly more pleaseng to the eye. And the fonts are large enough. Of course, other than than Outlook is a nightmare on the lack of syncing etc...
    I am resigned to using ICal but is there a way to change it's look? Or an emulation program that will use ICal but present it better on the screen?

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

  • After the recent update the entire browser, including menus, icons, and everything on the web page, are too small. Fonts are smaller, pics are smaller, zoom settings will not remain universal. Minimum font size will make text readable, but all pics are to

    The new update has screwed up my browser settings, I cannot get them fixed and Im pissed because my computer is an eye-sore to read until this is fixed! EVERYTHING in the browser is smaller, fonts, menus, icons, web page content, pictures, tables, etc. I have set the minimum font in the settings and the text is just to a point where it is easily readable at the maximum size setting, but all the menus and icons are still tiny and hard to read. The last version I had installed worked fine with no add-ons needed. Everything fit the screen fine and was easily readable without modification. I want this version off my PC and I want the last version I had back on but I dont know what version it was!!!!!!! ARARGGGG
    In fact, this stupid troubleshooting window that I am in filling out this form doesnt fit the page right at all, and edges of the text are cut off, so Im not even sure what some of these boxes are asking for!!

    See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
    *Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
    *Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.
    If you need to increase (or decrease) the font size on websites then look at:
    Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • E-mail messages print font too small display font too big

    I recently upgraded to OSX 10.4.9 and tried to print an e-mail message.
    The message printed in microscopic sized font and I followed the suggestions on the HELP section about increasing font size.
    With display font set at 24 the printed message is just barely readable. However, this is unacceptable for display purposes and actually still too small for printed copies of the message.
    I connect to an Epson CX4600 printer as a network device on my Apple AirPort Extreme card.
    What can I do to print acceptable copies and not have to tinker with the display font every time I want to print?
    iMac   Mac OS X (10.4.9)   Printer Epson 4600

    I tried all the options in Help File in Mail Printing Email Messages
    Options were "keep the same apparentfont size" didn't change a thing.
    Scale message to fit = result was smaller size font,
    Rewrap message to fit, didn't change a thing.
    I still can't print out a readable copy of the email.
    This particular Email wouldn't even copy correctly into Word so that I could adjust it there, it kept getting cut off and I changing the margin tabs didn't help either.

  • When Printing a web page from Firefox. The fonts are timy and all spacing is incorrect.

    Prior to beta 4.12, the pages printed correctly. Now, the fonts are small and the text spacing is incorrect. All text has at least one extra space between the letters.
    This happens on ALL sites when printing a web page.
    I tried printing the same page in Internet Explorer and it prints correctly.

    See this thread:
    *[/questions/787654]

  • CS6 Photoshop fails to print selected area

    PS fails to Print Selected Area, instead it prints an area smaller than the one selected, and it does not center the image on the paper. How can I fix this? The details: image size is 20x24 in. and my selected area is 10x12 in. I am printing to a 13x19 sheet of paper. The image size as printed is 6-5/16 x 9-1/8 in. instead of 10x12, and my selected area is cropped -- unless I check Scale to Fit Print Media but even then the printed image is still the wrong 6-5/16 size. Finally, the visualization is accurate: what is shown in Print dialog is what printed and instead of centering it as requested, the image is printed in the location as displayed. See attached screen shots.

    Ask in the PS forum, but as far as I can tell this is a specific Mac-only genuine bug. That being so, duplicate the image and do a "hard" crop for printing.
    Mylenium

  • Font is smaller when I print or export to PDF

    Dear all,
    I have a strange problem when I try to print or export to pdf my .pages document.
    I use FontAwesome.otf in order to have some nice icons but when I print the document this icons are smaller then the document.
    I also try to make them bigger but they get reduce anyway.
    Screenshot from the pages document
    Screenshot from the printed or exported pdf
    Any suggestion is more then welcome, thank you!

    To install fontawesome you simply download the kit from this link. Once you unzipped the file you will find the .otf font inside the folder 'font'. Then simply drag and drop the font inside your fontbook.
    To insert an icon in pages you simply copy and paste it from the cheatsheet. Remember to change the font to FontAwesome in the Format > Text panel otherwise you would not see the character.
    Hope it helps!

  • Print font size too small

    When printing in Safari, the print size is tiny, both in email and web sites, smaller than it appears on screen. When using Internet explorer or Firefox it prints the right size. If I go to Safari edit, preferences, then appearance, and raise font size, it will print larger, but all font sizes on web pages are way big. How can I just increase the print font size. My IP is Comcast. OS is Win XP sp3.

    It should print the same size. Click View -> "Make text bigger" before printing.

  • Onscreen font very small compared to large font in print

    Fonts on screen are much smaller than printed versions. Can't harldy see onscreen & I'm sending resumes!!

    This is in TextEdit set at 100% wrap to page & what I'd like it to print as, but if you print it you'll see the difference. Almost 2 to 3 points larger
    MY NAME IN CAPS & BOLD 14 point times
    12 point times
    All appears the same in text edit as in MS word document.
    The fonts are very small on screen, where most will be reading from, but then I worry when they print out a resume it looks ridiculous!
    13 point times
    All appears the same in text edit as in MS word document.
    The fonts are very small on screen, where moist will be reading from, but then I worry when they print out a resume it looks ridiculous!
    Notice the blurriness too.
    This is in MS Word MAC set at 100% wrap to page & what I'd like it to print as, but if you print it you'll see the difference. Almost 2 to 3 points larger
    MY NAME IN CAPS & BOLD 14 point Times New Roman b/c most don’t have Times in their MS Word
    12 Point Times New Roman
    All appears the same in text edit as in MS word document.
    The fonts are very small on screen, where moist will be reading from, but then I worry when they print out a resume it looks ridiculous!
    14 point Times New Roman
    All appears the same in text edit as in MS word document.
    The fonts are very small on screen, or how I’d like them to be and where most will be reading from, but then I worry when they print out a resume it will look ridiculous!
    Oh, & notice the blurriness.
    I just printed the page from here & it all looks like it should look. What setting could be incorrect?
    I've checked & tried almost everything I know.
    Thank you thank you for any help you can give

  • I have a macbook pro 17".  How can I change the way things look?  The page only takes about half of the screen and the fonts are fairly small.  I am sure there is an easy adjustment.  Please clue me in.  Thanks

    I have a macbook pro 17".  I love the big screen, but how can I change the display?  The content takes about half of the screen and the fonts are very small.  I am sure it is an easy fix, so please clue me in.  Thanks

    Look at your >System Preferences>Displays

  • How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

    How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

    Hi el_giclee,
    Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
    I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
    Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
    It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
    Michael

  • Fonts are to small in my Photoshop Elements 10 software.

    When I try to put names or dates on a photograph the fonts are to small.  Even if I increase it to 72 the fonts are so small on the picture the words are not big enough to read.   How do I fix this?

    Install Premiere Elements, Photoshop Elements
    Mylenium

  • To everyone who thinks the fonts are too small on ...

    To everyone who thinks the fonts are too small on the N9 i suggest you contact Nokia about this issue. I know i am!

    please see my post here: /t5/Maemo-and-MeeGo-Devices/N9-Font-too-small/m-p/1338481#M32968

Maybe you are looking for