Printing For an XP

Can I Printer to a LW 630 Pro from a XP?

Duplicate post - see:
http://discussions.apple.com/thread.jspa?threadID=237008&tstart=0

Similar Messages

PO print for fax/email transmission

Folks,
Have a generic query. How would you print the POs that were transmitted by FAX or EMAIL without adding a new message type?
The users in Prod. system have access to ME23N alone. If the message type was set as print, then no issues as they could go ahead and just reprint it.
However for the POs set as FAX/PRINT, the print icon does not appear.
What is the way out then?
Have tried with SP01, but could not get the PO print.
How is the spool no. found for a given PO. I checked in the processing logs for the messages, it said 'No processing log exists'.
Regards,
Sameer

do u wanna say u havnt configure print medum and u need to have print
or u have took fax or mailed it and now u need to take print
for case 1 print not possible
for case2 go to me9f select sucessfully processed and give po nno
u will get the entry select it go to message details then here add new output for print and save
please clerify ur question
regards
kunal

Excise invoice Print for multiple invoices

Hi All ,
i have developed a z smartform and attached to standard tcode J1IP o/p type J1I0 . The o/p is comming fine when i select one excise no after excecuting tcode J1IP But if selected multiple invoices by checking the checkbox and press print preview or print
button each time it is giving print preview/print diaog. i.e i need to execute print for first invoice and again i have to come back and again it will ask print prview/print dialog for second like wise n times for n no of selected documents .
my requirement is like when i execute tcode J1Ip and when i select multiple invoice i should get only one print preview or print dialog for all documents . how to achieve this

HI friend,
Its simple.
Put all the invoices in a single loop. I think you will be calling the smartform function module for each and every invoice. Don't do like that. Just collect all the invoices in the final table first and after that display the invoices.
I think you can understand what i am saying.
Please try and let me know if you have any queries i will help you.
Thanks,
Sri Hari

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How do I get multiple lines to print for a blank text field so that it can be filled in by hand?

I have to design forms that are fillable electronically and by hand. The problem that I am running in to is supplying multiple lines that will print for people that are hand filling the form. I have tried to add an image of lines behind the text field, but these would get in the way when the form was filled in electronically.
I am using LiveCycle Designer ES2 v. 9.0 on a Windows machine.
Thanks.

Ok.
Take a textfield
Go to Object | Allow multiple lines
Go to Layout | Height | activate "Expand to fit"
Go to the initialize-Event or readyform (You have to change the _ for your textfield)     this.rawValue = "___________\n___________\n___________";
Go to the enter-Event   this.rawValue = null;
Go to the exit-Event
          if(this.rawValue == null)
                this.rawValue = "___________\n___________\n___________";
          }else{}
With this solution you can simulate the same as pattern see above.
I hope this is helpfull for you,
Mandy

Condition records- setting printer for multiple vendors at the same time

Hi all,
I have maintained condition record for POs for Key combination of Doc type,Purch Org and vendors.Now for a particular doc type and P.Org , I have around 50 vendors. I need to change the printer for all these 50 vendors to 'printerx'.Is it possible? I tried selecting multiple vendors at a time and changed the printer but its not working.

Hi Saurav ,
You can achieve this through SCAT transaction.
For running SCAT take the help of ABAP team.
I hope u might be having the list in the form of text file.
If not , download the same from NACH table.
Regards
Ramesh Ch

How can I make two copies of the same picture one with my watermark and one without for printing for clients?

how can I make two copies of the same picture one with my watermark and one without for printing for clients?

Export the photo twice, once with a watermark and once without a watermark.

All in One oversized printer for scrapbooking

Hi. I am looking for an all in one printer/copier/scanner AND to be able to print my 12' X 12" layouts. Do you guys have ANY idea where I can find one? I have been searching the internet all day and am frustrated! Thanks for your help!!
Sherrie

Hey Sherriedulany,
There are plenty of all-in-one printers made, but the problem is finding one that can print a twelve foot by twelve inch layout. To do this you will need a printer that accepts roll paper, and unfortunately the only printers that accept roll paper are high end photo printers that don't have a scanner, fax, or copier built in. I would suggest getting a dedicated photo printer for your layouts, and an all-in-one printer for your general home/office needs. A very nice photo printer that Best Buy® sells that should meet your needs is the HP Designjet 90, which accepts 18 inch roll paper. I hope this helps out!
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Looking for a mobile printer for my car/ on the road work for my IPAD2

Looking for a printer I can use in my car and where ever necessary.

I've been happily printing for a while from my iPad to my battery-operated HP H470 with absolutely no wires (and no router / pre-existing WiFi connection - it operates in AdHoc mode). Literally just the iPad and the H470 - in fact, one time in a marquee in the middle of a muddy field with no power and a long way from the nearest WiFi connection, so it can be done from literally anywhere.
Once I'd sorted it all out, I wrote down the solution and the steps to get it to work in the hope of helping others:
http://genuinely-original.blogspot.com/search/label/iPad Printing
Hope that's useful to someone!
Thanks,
Keith

Standard Smartform for label printing for packages - pls advice

Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.

hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful).

How do I make my HP P2055dn printer into a wireless network printer for 5 computers

How do I make my HP P2055dn printer into a wireless network printer for 5 computers? Windows versions on computers used are XP,Vista & 7.
Thanks
Leon

Unplug the USB cable from the printer. Plug your printer into your wireless router with an Ethernet cable.
Next, on each computer, get the latest software for your printer from the "Support & Drivers" link at the top of this page. Install it and select "Network" installation when it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set a noise print for the entire track? (Back to Basics)

Ok. I've only worked in STP with single audio clips. Now, I'm trying to adjust audio inside a Multi-Track project sent from FCP... and it's a little different. At least to a guy like me.
I'm struggling with the most basic issue, and that's possibly why I can't find an answer to it.
Simply, "How do I go about setting a noise print for an entire track?" I've done this for a single audio clip, but now that I'm in a slightly different environment my old ways don't work. I've looked through video tutorials hoping to find something but no luck.
Any help is greatly appreciated!
JS

With the audio opened in SoundTrack Pro, select (highlight) a small portion that only contains the noise that you want to reduce. Sample that section. then select the entire audio clip and use the Noise Reduction tools to reduce the noise that you sampled earlier.
-DH

Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone?

Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone? Any instructions?

Yes. You can do that
Just follow the instructions for the appropriate device on this HP web document.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

OfficeJet pro 8600 not printing for USB attached WIn7

I have an OfficeJet Pro 8600 Attached to Win 7 Dell with USB cable. It scans very well but most of the time when you go to print, it thinks the USB device has timed out and it gives me garbage about where to send a fax to?
I have other computers runing XP that are Wireless devices, and they take longer but print every time something is sent to them.
This connection is 3' away and the printer default & only printer for Win 7 machine. Under printers and devices it always sees the printer.

Try to run the Print and scan doctor and check the results.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041
Also, see if you can get another USB cable. Let me know the results.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

when i send a PDF file to out side print, some of the things I aded dose not print.
Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Printing For an XP

Similar Messages

Maybe you are looking for