Printing form name  for FORM-16A

hi
  could u plz help me in finding printing form&prg. name for FORM-16A
      my concernig functional want to insert QUATERLY AKNOWLEDGEMENT NO. in FORM-61A  , but he is not entering them any where in SAP .
    guide me the solution for this.
urget plz.

Hi Sachin,
You will find the print programs and forms in the table <b>TNAPR.</b> Check the table once.
Thanks,
Vinay

Similar Messages

  • Printing form name for FORM-ER 5

    hi
    i want to know the form name and  printing program name  used for CENVAT credit rule 9A 2004 (ER-5).

    Hi Sachin,
    You will find the print programs and forms in the table <b>TNAPR.</b> Check the table once.
    Thanks,
    Vinay

  • Print program name for the dunning form F150_FR_DUNN_01 in sapscript

    Hi,
          I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
    Kindly help me.
    Thanking you.
    Pujarini Patra

    Hi,
    Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
    and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP  0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
    The corresponding SAP sample Forms are:
    - F150_DUNN_SF for Smartform; and
    - F150_DUNN_SF for pdf Form (don't let the name confuse you )
    I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that  myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
    There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
    - FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
    - FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
    So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
    As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
    The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd  try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for  view Cluster VC_T047_F... That would save the whole effort to try to detect the type for  form assigned...
    Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
    The selected entry is the one you are looking for to assing your custom forms, I believe.
    cheers
    Janis

  • Want SM form name for cheaque printing

    Hi Friends,
        I'm having a new requirement for cheque printing(TC: F110). i'll plan to create it in smartforms.
        1) How to find the print program name and form name.
    Thanks & Regards,
    Vallamuthu.M

    Generally in cheque printing the calling program will be a standard one and will be set by the functionals.
    for this we need to see the functional settings in SPRO.
    Goto SPRO -> SAP reference IMG ->FInancial Accounting -> Accounts receivable & Accounts payable
    -> business transactions -> outgoing payments -> automatic outgoing payments -> payment media
    -> make settings for clasasical payment medium programs -> Assign Payment medium program for payment method in country
    when u execute the last one, you will get a popup asking company code of the cheque and you will find the program name..
    Mostly it shud be 'RFFOUS_C'.
    and regarding the form name goto F110 -> Pmnt methods in cpmpany code -> here you have to select any compant code -> Form data
    now you can see the Form name.

  • Standard Print program / Form name for transaction F-58

    Hi,
        Can anybody tell me what is the standard printprogram / standard form name for the "Account Payable" for transaction "F-58".
    It's quite urgent. Points will be rewarded.
    Br,
    Laxmi

    Hi
    <b>Form name:
    F110_PRENUM_CHEK
    program name:
    RFFOUS_C</b>
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Standard form name for QM01 and QM02 ?

    Hi,
    Can someone tell me the standard form form name (print program) for transaction QM01 ?
    How do I find standard form name for any transaction ?
    Prompt replies will be awarded.
    Tushar.

    QM_NOTIF_OVERVW1

  • Form Name for Warehouse Management - URGENT

    Hi
    Can anybody pls let me know Form Names, Print Program Names for the following:
    1. Stock Removal
    2. Stock Placement
    3. Warehouse Movement

    Check the Transaction NACE --> V2 (Shipping) --> Output Types
    There you can see all the Stock related Output types. By SELECTing the output type and pressing Processing Routines you can get the Form Name and print program details...

  • Hi guru's i want to dovelope smart form how can we give form name for sales

    hi guru's i want to dovelope smart form how can we give form name for sales order  plz help me  ...

    Hi,
    If u want to assign the form to Standard sales order, The, this form in the NACE.
    and the, Run from va02/03.
    Reward Points,
    Vamsi.

  • New Form Layout for form 16A India

    Dear
    Whether any one has already implemented SAP Note 1476590 New Form Layout for Form 16A and Form 24D.  Pleae opine
    Regds

    Hi All,
    I have a question. We are analysing the implementation requirement of Note 1486147 ( New Form Layout for 16A however stucked with a new message which required to be maintained in CLass J1IN. We do not have this class available in SAP and not sure if there is another OSS note for that or this will be maintained in Service Pack. I am new to this Client and what I can confirm that since last many month , Finance service packs have not been applied here.
    Please help. Also if somebody has worked on this, can give me the contact numbers, it would be great.
    Thanks
    Ravikant

  • Standard smartform name and standard print program name for Sales Quotation

    Hi,
    I would like to know the standard smartform name and standard print program name which can be used for sales quotation through transaction VA23.
    For eg: The standard output type for billing document (For T code VF03) is RD00 and it' smartform name is LB_BIL_INVOICE. It's print program name is RLB_INVOICE.
    Similarly, I would like to know the standard smartform name and standard print program name for AN00 output type which is used for sales quotation. .
    Regards,
    Zahid

    Hello
    std driver prgram is /SMB40/RVADOR01
    form entry is ENTRY
    std smartforms is /SMB40/SDQUO_A an du can check this the in NACE tcode.
    Output Type     AN00          Quotation
    Application     V1            Sales
       Program                   /SMB40/RVADOR01
       Form Routine              ENTRY
       Form                      RVORDER01
       PDF/Smartform Form        /SMB40/SDQUO_A                 
    Thank u,
    santhosh

  • Wats d in-built print PROGRAM name for layout MEDRUCK???

    wats d in-built print PROGRAM name for layout MEDRUCK??? and can we change it??
    wat shud we do if we want2 change it??
    i mean...assume we got a scenario in which we need ta use MEDRUCK layout n print progrm n change some text in it.. and d address  and header in it..
    how cud we do dis??

    Hi ,
    The print program name for 'MEDRUCK' is <b>SAPFM06P</b>, it is not advisable to change the print program instead if you want to do any changes use Subroutines in the layout. Eg : PERFORM <Subroutine name> in PROGRAM <pname> USING <in_variables>
                   CHANGING <out_var>
    ENDPERFORM.
    Srini

  • How to find SAP Script Form name for an particular transaction

    Hi,
    I had an issue, in the transaction F110  Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
    Thanks in advance.

    >
    Muralidhar Medisetty wrote:
    > Hi,
    >
    > I had an issue, in the transaction F110  Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
    >
    > Thanks in advance.
    hey
    NACE is the transaction ..for this u must know the output type..
    Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
    FBZP -> paying Company Codes -> u will get Script used for Payment Advice
    FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
    ....Give points if useful.....
    Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

  • Need form name for LPET

    I'm trying to find the smartform or sapscript used for the output of delivery schedule document. Message type is LPET and I view this print in ME9E.
    Any suggestion on how to fnd out which form is used?

    Hi,
    I think you meant output type = 'LPET'.
    in table TNPAR search for output type = 'LPET', there is one entry. You will find the program name, subroutine name and the SAPscript name.
    Or , In NACE transaction. , select Application 'EL - Purch.Sch.Agr.Release', click on Output types at the top. Select the desired output type, dbl click on processing routines.
    You will get  a screen with Form name , program name, subroutine name for each medium, Print, Fax and EDI.
    Regards,
    Subramanian

  • Form name for WCM Objects

    Pl suggest which print forms I should select in IDES client for WCM Objects while configuration for Enhanced WCM Model?
    Thanks
    Lucky

    I have got the form names using SE71 with language as English and used the same form to copy from 000 client to IDES client for scenario execution.

  • Hr-abap - customer layout names for forms

    hi
    in hr-abap i have form3a , form6a form16a i want the coustmerlayout names for those forms
    thanks in advance
    Edited by: Julius Bussche on Feb 5, 2009 9:18 AM
    Please use meaningfull subject titles

    Hi,
    Try this link
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/1b083e7623445ae10000000a11405a/frameset.htm
    it may helpful to you.
    Regards,
    Syf

Maybe you are looking for