Printing from Classic App to new HP printer

My new HP 6988dt will not print from a Classic App. Is there a Classic printer driver that will produce a file that could then be printed? (Something like the "Save as PDF" option in OS X print dialog.)
Pete

Greg,
LaserWriter 8 requires an active Appletalk but I can't make it active - it keeps saying I have to be connected to an Appletalk network. I have Appletalk turned on in Network preferences (using ethernet) since I attempt to communicate with an iMac on occasion but that doesn't.
I posed a similar question in the Classic forum and received info about a shareware Classic print driver called PrintToPDF which does produce a pdf file. This requires the extra step of printing the pdf file but at least I can get to the printer.
Thanks for your help. If you have a suggestion as to how I can get the LaserWriter 8 driver to function, I would like to try that route as it might be more direct.
In answer to Jerry's suggestion, I not only looked for a Classic driver, I emailed HP tech support. The world is moving too fast; I went looking for an update for my Scanjet 3670 and find HP isn't providing any support or even acknowledging it's existence except in archives.

Similar Messages

  • Can't print from my iBook to new HP printer

    I just used the software disc to install a new printer on my iBook G4. I'm running Mac OS X 10.4.11, and the printer is an HP Deskjet F4400 series. It appears to have installed correctly. They are attached by the USB cable. When I try to print (from Word), it says it is printing, but nothing is happening. No error message, no printed page. In the print queue, it says it has already printed the document. Thanks for your help.

    Hi Jody, and a warm welcome to the forums!
    Have you done this yet?
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then reboot.
    If that doesn't work try Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html
    Add the Printer again after removing it.

  • Air Print from eBay app using non AirPrint printer DYMO Labelwriter 450

    hi all!
    i use the eBay app in my iPhone a lot. have a DYMO Labelwriter 450 installed in my macbook pro.
    is there any way i can use AirPrint from my iPhone to the DYMO ?
    if i use services like Printopia will i need to do any page setups?
    how do you guys out there do this?
    please advise!
    thanks

    Actually several. Your printer manufacturer may very well have one, but several third party apps are available. I have had pretty good results with Printer Pro. As far as printing to a device that is NOT on your network, no. How would it connect?

  • Printing from Classic Using OS X Drivers

    Shouldn't I be able to print from Classic using my Epson USB printer's OS X drivers (OS 9 drivers don't exist for this model)? I've tried opening the Chooser in Classic, but the printer doesn't show up.
    Thanks,
    Emily

    Go to Chooser (while in a Classic App) and select LaserWriter 8 driver - even if there's no printer on the right.
    When you want to print, the LaserWriter 8 print dialog comes up and you can select your OS X printers in the destination printer pull-down.
    Good luck.

  • Printing from Classic

    I can no longer print from Classic (v 9.2)but printing from OS 10.1.5 is fine. Printing from Classic was not a problem until I tried to network my G4 with a PC. After several attempts, changing settings (airport, ethernet etc)I gave up and reset for printing in OS 10.
    The printer is a Personal laserwriter 320. In classic when I print the message is Laserwriter 320 could not be found. I have tried changing settings etc. but can not get it to print.
    Any suggestions
    G4   Mac OS X (10.1.x)   Mac OS 9.2

    I hope that's enough for someone else to now take this further…
    An AsantéTalk ethernet to LocalTalk bridge should plug in and work with no configuration, so that shouldn't be part of the problem.
    AppleTalk does need to be on, but it doesn't need zones; that's just a option for more sophisticated, managed networks.
    You probably need to turn off all other networking, including AirPort, and I guess TCP/IP needs to be set to Configure: Manually, not Using DHCP, etc.
    Pure, bootable OS 9 is what you invoked when you changed the startup disk to use the classic 9 which opened to the 9 desktop… as opposed to Classic, which bars some features so a cut-down version of OS 9 can run over X… the point here being that misconfiguration in X can effect 9 utilities, particularly at the level where peripherals including printers ineract with the system, and some things which perfectly happy in pure 9 are simply incompatible with Classic over X.

  • Cannot print from photos app on iPad

    After update to iOS 8.1 iPad will not print from photo app to air print printer. Tried turning both on and off but nothing works. Can print from Safari. When printing from photos app message comes up printer needs paper which it does not. Anyone else?

    Hello,
    Thank you for your help. Unfortunately, when trying this I do not have Usage as an option under the Settings/General tab.
    Also, I have an original Ipad, which doesn't have a camera.
    Regards,
    Claire

  • Print wireless from Classic Apps

    I'm on 10.2.8, using Airport Extreme and want to print wirelessly from both OSX apps, as well as Classic apps. I can print from OSX apps with no problem and I can print to the printer when I'm connected to it directly via USB in both OSX apps and Classic apps. But when I hook the printer to the Airport base, I can only print from OSX apps. I read through the forum and saw where someone said you can not print Classic apps through Airport .. I know it's not compatible with 9.2, but I'm talking OSX, in Classic mode ... I know it can be done becuase I've had it working before without any problems. I had to switch printers for a short time, so I unhooked it from the Airport base for a period of time, but when I hooked it back up, now it won't work. I'm not sure if any settings have changed since I've done different auto updates ... but how can I check the settings? My printer is HP CP1700PS and the driver does not have a rendezvous option ... I just don't know how to get it to recognize the printer. Can anyone help? I'm not even sure how to tell what version of driver/firmware I have, although I thought I just updated this not too long ago. THANK YOU!
    PowerBook G4 Mac OS X (10.2.x)
    TiBook G4   Mac OS X (10.2.x)  

    It won't work with OS 9. Printing to a printer connected to a round AirPort Extreme base station (AEBS) requires Mac OS X v10.2.7.

  • I can't print from iPhoto on my new Epson XP820 printer.  Any suggestions?

    I can't print from iPhoto on my new Epson XP820 printer.  I can print from other applications, like Word or Mail.  Any suggestions?

    Did you check software update or App Store to see if the printer is among
    those Epson models who may have an update download available now?
    Of course, some of these printers, even though wi-fi, may require the wire
    to set them up for first-use, to be identified. Both my Epsons appear twice,
    for wi-fi and again with USB. So I named each appearance, different. So it
    is possible to tell in more than one way, which setup that was selected. A few
    features do not correctly work in instances where drivers differ.
    The latest Epson update helped my newer computer connect to oldest Epson.
    Even though a 1.3GB huge Epson drivers file did not help, & OS X didn't see it.
    Hopefully the they included an adequate quick-setup guide, though that may
    have been for Mavericks, etc. Yet your iPhoto issue may be something else.
    Good luck & happy computing!

  • Is it possible to print from classic?

    Hi Folks! I've tried unsuccessfully for 3 years now to print from classic. If I really need to print from one of my OS9 apps I usually just put the file in the OS9 computer (that's why I keep it) and print from there by just unplugging the printer from the OSX computer and plugging it into the OS9 computer. It's not the drivers or the printer as all of that's installed. I suspect is has to do with print spooling and background printing but I've tinkered with this for a LOOOOOG time with no success. Tom

    Thomas Bryant wrote:
    Hi Folks! I've tried unsuccessfully for 3 years now to print from classic. If I really need to print from one of my OS9 apps I usually just put the file in the OS9 computer (that's why I keep it) and print from there by just unplugging the printer from the OSX computer and plugging it into the OS9 computer. It's not the drivers or the printer as all of that's installed. I suspect is has to do with print spooling and background printing but I've tinkered with this for a LOOOOOG time with no success. Tom
    I suspect that you're using an HP inkjet. I have several HP inkjets, and all of them, without fail, simply refuse to print from Classic _using the HP drivers_. (Tiger fixed things so I can print. See below.) In all cases, attempting to print in the background works just fine, right up to where the spool file has been created and is about to actually go to the printer. I then get an error, on some printers, indicating that the file cannot be printer. On others, Classic simply either freezes or crashes. If I restart Classic, it'll freeze or crash again as soon as the print system attempts to print that file. If I delete the spool file, all is fine... except that I didn't get any output. The HPs started misbehaving with Panther. My Epson inkjet still works, so I suspect the problem ain't Apple's fault. The problem goes away if I boot the machine in OS 9... where it's possible to boot the machine in OS 9.
    If I try to print from the foreground instead, I just move things up. Now I get the error message, freeze, or crash immediately instead of waiting for the spool file to be created.
    That said, printing from Classic is simple... if you are not using a HP or Lexmark non-PostScript inkjet printer and are trying to print from Panther. (Jaguar and HP wasn't a good match, either, but at least sometimes you'd get output.) Given that most (not all, though...) Epson and Canon inkjets and all PostScript devices, even inkjets, were able to print, I suspect that HP's and Lexmarks' drivers have problems.
    Tiger fixed the problems. In Tiger, Apple rigged it so that it doesn't matter if the vendors' drivers work or not, or even if they have OS 9 drivers, as long as they have _OS X_ drivers. In Tiger, the default is for printers in Classic to use the Apple LaserWriter 8 driver and pretend to be a PostScript device. The LW8 driver then hands off the output _to the proper OS X driver_, which then prints. You don't get features which aren't in the LW8 driver, but you do get output, including colour output. If you have an Epson inkjet, you can still use the Epson OS 9 driver... if Epson supplies one. It will usually work.
    I suspect that you would be able to print from Classic just fine if you were using Tiger. You're using Panther. I suspect that you're not going to be upgrading at this late date.

  • How do I get print n share to work after upgrade to iOS 5.  I can print from this app thru wifi.  But it can,t print mail, web pages, etc..

    How do I get print n share to work after upgrade to iOS 5.  I can print from the app thru wifi and PC. However am unable to print mail, web pages, etc..
    In mail when I try to print it just says can,t find air printers.  It used to say print with print  n share.

    I sent e-mail to developer regarding this and they said that basically Apple has denied them access to the Airprint dialog in the new source code for iOS 5.  So, the only way to print to pdf is to capture the e-mail or webpage in the internal apps within Print n Share.  INHO, this really *****.  Apple should make printing to pdf files just a standard feature of all their apps.  If they don't do this, they are going to lose alot of business to the Adroid world as pdf file format is the business standard for all documents.

  • Printing from Classic on a non-os 9 printer

    Hi...
    I hope you will tell me it will work...
    I have a Samsung CLP-510 printer and there's no printer driver for OS 9. I want to print from Classic (on a Power Book G4). I need to use Classic because my whole invoice software is on this system. (yeah, I know...I know...)
    There's no problem to install de Os X driver, so the printer will be installed on the computer. Will Classic have the printer installed too, even if i don't really install the os 9 driver? Will I be able to print directly from my software in Classic ?
    Many thanks for your help.
    I need to know it before doing all this, that's why I'm asking you all.

    Probelm resolved.

  • Problem with printing from classic

    I used to print things out from classic but somehow I can't print anymore. It tell me to go to chooser and choose the printer but I can't choose it. I tried to click on HP printer but no reponse. I tried to reinstall but no use. That reinstalling seems only appy to OS X, no affect on classics. Now what?
    I use mostly os X but there are some files I need to print from classic appliction. Funnything is I was able to do it and somehow it does not do it anymore.

    Hi Soo Lee;
    You are on the forum for Intel iMacs and in your original message you did state what system you had hence the reply that you can run "Classic" on an Intel iMac.
    I would suggest that you report on the forum for PPC iMac instead.
    Allan

  • Upgrade to tiger, can't print from any app

    Hi All
    I normally fix my own problems, but this has me stumped.
    I've upgraded to tiger and done a software update to 10.4.7.
    Now I can't print from any app.
    I've done the "reset printing system" but this hasn't worked.
    All my printers are ethernet networked, no USB.
    At this time of writing, I have just managed to print from indesing CS2, but nothing else, mail, textedit, acrobat, none of them work...
    ...Don't suppose anyone has any ideas?
    PS, when I attempt to print, my app is quit and I have to relaunch.
    Az
    G5dp, G4qs, mini, eMac, G3 & iPod... big TFT & Nespresso coffee machine!   Mac OS X (10.4.7)   Should of stayed with panther!

    I had the same problem when I upgraded to Tiger. I have a HP PSC 2175 All-in-one printer. I solved my problem by uninstalling the HP printer software, emptying the trash, restarting, and reinstalling the HP printer software. I also installed the lastest HP printer driver, which I downloaded from the HP website.
    I repaired permissions after doing all that, and now everything seems to print fine.
    I suspect the same steps might work for other printers, as well.
    The relevant page from the HP site is here: http://tinyurl.com/ztkwq
    Macfixit also has a tutorial for troubleshooting printer problems. I have not tried any of the solutions which involve downloading troubleshooting software. Maybe someone else here can say whether the software mentioned in the article works well or not. You can find the Macfixit information here: http://www.macfixit.com/article.php?story=20060724111816602
    Hope that helps.
    17-inch iMac G5   Mac OS X (10.4.7)   512 MB RAM

  • I want to print from my ipad wth the least amount of issues. I have downloaded some apps that let me print but only out of e mail. What printers do you recommend that print from most apps?

    I would like to be able to print from my Ipad 2 with the least amount of effort. I have downloaded a few apps that I thought would be good but they
    just let you print from the app and you have to e mail it to yourself to print. I need someone to recommend a printer that I can print seemlessly from most applications and the Ipad will find it.

    You need an AirPrint compatible printer, then you don't need any app to print/
    Scroll down to the bottom of this page:
    http://www.apple.com/ipad/features/airprint.html
    Canon and Epson have also announced AirPrint compatible printers:
    http://www.pcmag.com/article2/0,2817,2393243,00.asp#fbid=KxYAklnyRuU
    http://www.macrumors.com/2011/09/12/epson-rolls-out-airprint-support-for-some-pr inters/

  • Can i print from my ipad with an wireless printer and an apple app or do i have to have an airprinter?

    Can I print from my ipad with an wireless printer and an apple app or do I have to have an air printer?

    It depends on the printer and if it is shared on your home network.
    I have a wireless HP printer, but it is not an E Printer and cannot print directly from my mobile device.  I purchased an Epson all in one E Printer so that I could print from my tablet.  THe printer cost me less than $90 at Walmart.
    (Epson 600 series all in one)

Maybe you are looking for

  • HT4759 How can I turn my location on on my iphone5 as it has been stolen?

    How can I turn my location on on my iphone5 as it has been stolen?

  • Problems recovering HP Stream 7 after installing Windows 10 TP

    Hi all About a month ago I bought the HP Stream 7. Soon after receiving it, I installed Windows 10 TP, without first creating and saving a System Recovery Image on an external drive. While playing with Windows 10 TP, suddently the touch screen stoppe

  • 8.5 to CRXIr2 Migration

    Post Author: Dmitrij CA Forum: Migration to XI R2 Hi Everyone, I recieved a task to learn the process of migration from 8.5 to XI server for further execution. Would Anyone please make a good list of steps required to accomplish this, I think it woul

  • Report Designer 2.5 and Richwin

    I have installed Developer2000 (forms 4.5 and report2.5) and developer 6.0. After i install richwin, i find that the report 2.5 would be terminated automatically when i double click the layout on a already built report. Can any expert tell me what's

  • WRT54G Firmware version problem

    hello people i gotta problem and if you can please help me... I have a WRT54G wireless router v7.2.00 (defoult firmware) in here last firmware is 8.2 http://homesupport.cisco.com/en-us/support/routers/WRT54G/download i download this file, but can't i