Printing from Flash page is too large for paper size

Here's what happens: I go to a favorite Sudoku web page (http://games.latimes.com/indexsudoku.html?uc_featurecode=lasud) and hit the "print" button on the page to print the puzzle. When I look at it in Preview, the puzzle extends off the page on the right and bottom. The same happens when I print it directly to my printer. Also happens if I select "Save to PDF". It seems that somewhere between the web page and my Mac, something forgets or ignores that my default printer is letter size and insists that my paper is larger.
If I print the same puzzle in my Windows virtual machine to the PDF printer, the puzzle is normal. So, I figure something is amiss on the Mac side and I don't have a clue what it is. (I am new to Mac).

Thanks for the advice. I did all you suggested and then tried it. Looks like everything boils down to Page Setup. I have two printers here at work and everything works fine if I set the HP Color Laserjet as my default in Page Setup. However, if I use the Canon MP830, the page goes wacko like before. For the Canon, the Canon IJ Driver (ver 4.8.3) was automatically selected at installation.
Doesn't matter which printer I print to...it all seems to depend on which printer I select in Page Setup. Any ideas on what is going on?

Similar Messages

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

Error formatting page : Page Area too large

Hello,
I use Crystal Reports X1 for my reports design and my report was generated successfully. I also use JRC to generate the report in my Java application and I get this error. "Error formatting page : Page Area too large" for the same report.
Could you please help me with this error.
Many thanks
Marilyn

Hi,
Please provide the environment details along with the web browser version information.
Before that my suggestion is to upgrade to CR 2008 as XI is out of support and also you can download lestest version of CR Java SDK's from below link
http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp
on this page select the link below Runtime Libraries.
Thanks,
Nilesh Benke

Yahoo page is too big for monitor screen. How doI reduce size of yahoo page?

When I open firefox the yahoo home page is too big for the size of the monitor.

Hi,
Try resetting the zoom by pressing '''Ctrl''' + '''0''' (zero) on the keyboard. Please [https://support.mozilla.com/en-US/kb/how-do-i-use-zoom?s=zoom+feature&r=0&as=s see this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

Since installing update on 6/25, printing pdf pages OK, but bank account activity type is too large for the page. How do I shrink the type?

Since installing Firefox v.3.6. 6 update on 6/25, printing bank statements in pdf format is still OK, but when I select the print option for my bank account activity the type is too large for the page. How do I shrink the type? We are running Windows XP.
== This happened ==
Every time Firefox opened
== I installed Firefox update on 6/25

Firefox doesn't display PDF files all by itself, it uses your PDF reader program which is also what handles the printing of that file type.
As far as the large printed font from Firefox, open File > Page Setup and see what the '''Scale''' is set to. 100% is usually the best setting, but you might need to use a smaller setting.

When scaling in page setup, 1st page prints correctly, but subsequent pages do not scale correctly/too large for the paper, parts of the text missing

When trying to print in Firefox, and when scaling the page size in page setup, the first page prints correctly, but subsequent pages do not scale correctly and are too large for the paper, with parts of the text are being cut off at the top and right. This is not fixed by checking or un-checking the "ignore scaling/shrink to fit page width" in the print window, or by changing the scaling%.
I am running Firefox 15.0.1, on Mac OS 10.5.8.
The same problem happens in the print preview and if I save the print as a .pdf
I have tried all the fixes in the how to's and others in various forums with no improvement.
This happens every time I try to print a document scaled up or down only in Firefox.

The 2nd page print scaling error has been an issue with Firefox on the Mac since 2011. People at Mozilla have not considered this a major problem. Try printing anything at less than 100% and you'll quickly see how every page after the first page being scaled wrong gets old real fast. The lack of a solution to this issue forced me long ago into using Safari as my primary browser. Good luck waiting until version 21 for a solution. Current release is 18.0.2.

Crystal Reports 9: Page Header plus Page Footer is too large for the page.

Hi,
I have a report that has the following sections.
GH1
GH2a
GH2b - has a sub report
GH2c - has another sub report
GH3
GH4
GH5
details - suppressed
GF5 - suppressed
GF4 - suppressed
GF3 - suppressed
GF2 - suppressed
GF1 - suppressed
The report works fine wehn I run it using Crystal Designer.I am using CR version 9.2.2.693.
When I try to load the report in my application, I get the following error.
Crystal Report Windows Forms Viewer
Page Header plus Page Footer is too large for the page.Error in File rptName.rpt:
Page header or footer longer than a page.
OK
There are no 'suppress blank sections' option set in the sections where the sub-Reports are.
I also tried setting the No Default Printer option.
The report gets loaded from the application only when I set 'New Page after' in the sections where there are sub-Reports.
I do not want to do this; Is there a workaround?
Thank you.

Can someone tell me if this problem is being worked on as it looks as thogh none of the problems regarding the message u2018Page Header plus Page Footer is too large for the pageu2019 have been addressed.
We have several reports that were written in Crystal 7 (I think) and worked in Crystal 9 and X1R2 but now give the above error. We have tried jigging the report in line with the various suggestions but at best can get them to run through successfully with one lot of data and then fail on the second or subsequent pages when you vary the data or report format even slightly. We can report on every bit of data separately or in various combinations but not in others. Changing the bottom page margin by 0.01 cm can cause it to fail on page 7 instead of page 530 (for example). We certainly do not have large page headers (just over 2cm) or page footers (about 0.3cm). We do have some subreports in the details section but have used 'fit to section', added 'keep together', removed u2018keep togetheru2019 from just about everything we can (in desperation) but to no avail. We cannot see a pattern to what is happening. It would be encouraging to know that someone is actually working on this fault.

With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
Below is the warning message from the Error Console

I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
View > Zoom
If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
 Cheers, Tom

NVidia PNY GeForce 6600 AGP Flashing Issue (ROM says too large for EEPROM)

Here's a puzzle for anyone willing to assist (I've heard japamac has a good history with this sort of thing so *fingers crossed*).
So, I got a Quicksilver Power Mac G4 recently for free (gotta love the university just throwing stuff away) and it was the 800Mhz Single Core model. I've recently acquired a Sonnet 1GHz upgrade cpu nib from a thrift shop for $7 and also got my hands on a free and working PNY 6600 AGP card (256mb). I had recalled the 6600 having the ability to flash a mac rom so I thought it would be a sure thing, especially after having done similar build-up for my old Dual 500 Gigabit Ethernet machine, instead opting for an ATI 9600 and a 1.8 sonnet proc which I then sold for $180 bundled with Leopard.
I followed this tutorial (https://discussions.apple.com/thread/2645959?start=0&tstart=0) and downloaded the latest nvflash and the rom image hosted on the site. According to windows the rom file is 32kb, and when I opened up nvflash it stated the rom already installed was around 64kb. I followed all instructions to a t and even opted to erase the eeprom as was suggested after backing up stock.rom.
So far so good...however when I try to flash the nvmac.rom file, I keep getting some error about a PCI board id not matching (having to override w/ yes) shortly before getting an error message that states that the .rom image is too large for the eeprom. How is this possible?
The card in question is a PNY GeForce 6600 256MB DDR DVI-VGA-TV AGP Video Card G606600ABD25T+BC4BCA
Am I just SOL because it actually is too large, or am I missing something here? I've re-flashed the stock.rom back onto the card and all works well on the windows front, but I was really hoping to have a mac 6600 on the cheap...any suggestions?
If you need any specific info, just ask. Will try to respond asap. Other than the rom size error message, every other step of that tutorial works just fine.

Unless I am missing something, the 6600 ROMs on the Mac Elite site all (3) show a 128 KB size. The 6600 PNY is listed as 128, and a download and check of the file confirms it.
If your cards ROM is 64 KB, you will need to solder a new, larger chip on the board.
Did you download a 6200 ROM?

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

I am having trouble with a video. I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format. Please advise.

I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

ORA-01401: inserted value too large for column from 9i to 8i

Hi All,
Am trying to get the data from 9.2.0.6.0 to 8.1.7.0.0.
The character sets in both of them are as follows
9i
NLS_NCHAR_CHARACTERSET : AL16UTF16
NLS_CHARACTERSET : AL32UTF8
8i
NLS_NCHAR_CHARACTERSET : UTF8
NLS_CHARACTERSET : UTF8
And the structure of the Table in 9i which am trying to pull is as follows.
SQL> desc xyz
Name Null? Type
PANEL_SITE_ID NOT NULL NUMBER(15)
PANELIST_ID NUMBER
CHECKSUM VARCHAR2(150)
CONTACT_PHONE VARCHAR2(100)
HH_STATUS NUMBER
HH_STATUS_DT DATE
HH_RECRUITMENT_PHONE VARCHAR2(100)
HH_RECRUITMENT_DT DATE
FIRST_NET_USAGE_DT DATE
INSTALL_DT DATE
FNAME VARCHAR2(4000)
LNAME VARCHAR2(4000)
EMAIL_ADDRESS VARCHAR2(200)
EMAIL_VALID NUMBER
PASSWORD VARCHAR2(4000)
And by connecting to one of the 8i schema am running the following script
CREATE TABLE GPMI.GPM_HOUSEHOLDBASE_FRMP AS
SELECT PANEL_SITE_ID,
PANELIST_ID,
LTRIM(RTRIM(CHECKSUM)) CHECKSUM,
LTRIM(RTRIM(CONTACT_PHONE)) CONTACT_PHONE,
HH_STATUS, HH_STATUS_DT,
LTRIM(RTRIM(HH_RECRUITMENT_PHONE)) HH_RECRUITMENT_PHONE,
HH_RECRUITMENT_DT,
FIRST_NET_USAGE_DT,
INSTALL_DT, LTRIM(RTRIM(FNAME)) FNAME,
LTRIM(RTRIM(LNAME)) LNAME,
LTRIM(RTRIM(EMAIL_ADDRESS)) EMAIL_ADDRESS,
EMAIL_VALID,
PASSWORD
FROM [email protected];
Am gettinh the following error.
Can anyone of you fix this one.
PASSWORD
ERROR at line 14:
ORA-01401: inserted value too large for column
Thanks in Advance
Sudarshan

Additionally I found this matrix, which explains your problem:
UTF8 (1 to 3 bytes) AL32UTF8 (1 to 4 bytes)
MIN MAX MIN MAX
CHAR 2000 666 2000 500
VARCHAR2 4000 1333 4000 1000 */
For column PASSWORD the maximum length is used (4000). UTF8 uses maximal 3 bytes for a character, while AL32UTF8 may use up to 4 characters. So a column defined in AL32UTF8 may contain characters, which do not fit in a corresponding UTF8 character.

My image is too large for the print service. Best options...

I shoot with a Nikon D800. It appears the images are too large for the print service. What's the best method to reduce file size? Open in Photoshop, edit size, and return to Aperture?

You would have to look in your TV settings, that is likely the issue.

'flash:c2600-js-mz.122-34.bin' is too large for available memory??

guyz, i have upgrade my 2621 IOS,the IOS requirement is 16/48 and my router is have 16/48 as well. But everytime the router boot, ther is an error msg. What does it means?
"%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
++++ BOOT MSG HERE ++++
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
+++++++++++++++++

++++ Show Version ++++
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(34), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 01-Mar-06 20:31 by pwade
Image text-base: 0x8000808C, data-base: 0x814718E4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 7 minutes
System returned to ROM by reload
System image file is "flash:c2600-js-mz.122-34.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 44032K/5120K bytes of memory.
Processor board ID JAD04290DBX (302381003)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
+++++++++++++++++++++++++++++++++++++++++++

Printing from Flash page is too large for paper size

Similar Messages

Maybe you are looking for