Printing from iPad2 in Notes, not working

We have several ipads being used in our office. All are printing fine from the "Notes" app except for one. Anyone know what could be wrong?
It goes through all the steps correctly, looks like it's working, but nothing prints.
Thanks,
Doreen

Thank you for replying so quickly!
Without going into details...everything is set up right and has been working normally except for this one ipad. I'm thinking it's just the ipad, however, we are changing internet providers (coming in today actually) and expecting much better service to use multiple devices well. I suspect this could solve our occasional issues of having to restart things - including the printer sometimes! Once the change is up and running we'll see if the issue continues. If so, I will call Apple. Perhaps someone can walk me through steps to figure out what's up with this ipad.

Similar Messages

Wireless printing from main Mac not working

I've read through a few threads about wireless printing issues via the TC but I have a twist. My second Mac (Macbook 10.4.11) is able to print wirelessly through TC without a problem. I've selected the appropriate printer via System Preferences>>printers and selected "Share this printer".
My main Mac (MacBook Pro 10.5.3) which is being backed up on the TC, is not able to print wirelessly. I've also correctly selected the printer and clicked on "share this printer". The printer is an HP2410xi connected to the TC via USB.
The print jobs appear in the print queue and the printer status is "ready". When I select the stalled print job and select Resume I get the message "Opening printer connection" but nothing happens.
Thoughts?

If the printer worked on 10.5 when it was plugged directly into the macbook shouldn't the same driver also work when the printer is plugged into the time machine. I've unclicked printer sharing on both macs and it still doesn't work. I see that HP does not have an updated driver for 10.5 so I guess that I'll just plug the printer back into the macbook's USB. Grrrr.

Wireless printing - from shipping sites - not working after update to iOS7

I am no longer able to print shipping labels from PayPal or USPS after updating to iOS7. I am able to print emails, etc. from other sites online - just not shipping labels. Is anyone else having the same problem? Is there a fix?

Tap Settings > General > Reset > Reset All Settings
Then restart the device.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Then try printing.

Printing from PS CS3 not working

One of our scientists has a workstation running Windows XP (SP2) and Photoshop CS3 (10.0.1). Connected to this setup is a HP Laserjet 1200.
When he tries to print a simple greyscale image on the printer (which can only print b/w) the print-out shows a very coarse line screen which was not present before he got his new computer.
We have tried manually setting the line-screen to 150lpi in the print dialog box. The only result of this was that the print-out becomes very dark almost black. We also tried to switch to the postscript driver for the printer (he has been using PCL up until now) but this shows the same printout as PCL.
Any ideas what could be wrong?

Go into windows and set the default printer to something other then what you choose to print with in PS CS3. Then when ready to print choose the printer in PS CS3 print screen. This has fixed a lot of printing issues with Photoshop.
Edit: I would also consider updating Windows XP to SP3 as in the next few months Microsoft will no longer support XP SP2 with updates.

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Its possible print from my galaxy note II?

I ve bougtht a hp 4620 printer wireless one, I m trying to use my cel to print but won't do it. Appear small screen saying no device found. If anybody know how to enable or disable anything can work it out? With the samsung galaxy note. I already got the hpeprint apps, after set up recognice my printer because I can see it posted when I open the app. I dont know if this have to be we my cel setting at all. Aprecciatte your help.
This question was solved.
View Solution.

It is possible to print from your Galaxy Note II using the HP ePrint App. Please look at this documents to answer your questions:
HP ePrint Mobile App FAQs
If you are able to see your printer, when you open the app but not able to print then:
The HP printer is not supported by the HP ePrint mobile app.
Your mobile device is not connected to the wireless network.
Your mobile device is connected to the wrong wireless network.
The HP printer is off.
The HP printer is not shared over the wireless network.
Also, if you are having issues printing from the app to the printer then check to see:
If the printer is turned off.
If the printer has an issue, such as a jam.
If the ePrint feature is turned off in the printer.
Your mobile device is not activated with ePrint Center.
The HP Printer is not shared over the wireless network.
The HP ePrint mobile app is not corrently installed.
The HP Printer is not connected to the wireles network.
Here is another doc that might be helpful when unable to print from mobile devices using the HP ePrint Mobile App.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Photoshop CS5 Print Settings button does not work

Photoshop CS5 (updated to newest version 12.0.4) Print Settings button does nothing regardless of printer requested. Does not work with either an HP1102w or a Cannon Pro9000 Mark II. I have deleted printers and reinstalled but it still doesn't work. Using a Mac Mini with OS 10.7.5
Message was edited by: HCASED

Received this from Black Magic:
From: Albert Chu [[email protected]]
Sent: Friday, April 03, 2009 7:11 PM
Subject: Re: For Albert: ISSUE: Playback Settings button in BlackMagic (Intensity Pro) project not working
Importance: High
Hello Joe,
Funny enough, I was just about to run this test and happened to check with another tech about this. Apparently another customer had gotten in touch with us regarding the same issue and after confirming this, found that it is a bug. As such, this has been logged and we should hopefully see a fix for it in our future updates.
Please continue to check our software downloads page for this update (we do an update roughly every 6 to 8 weeks). Thanks for your patience.
Regards,
Albert Chu
Support Engineer
Blackmagic Design Inc.
www.blackmagic-design.com

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though.

All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.

Version 8.1 Can't Activate, Can't Update, Can't create/export NX *.prt Files to 3D PDF. Screen Capture feature does not properly represent Model/Bodies. Printing from NX does not recognize Adobe Acrobat 3D as a printer to try and export.
I was able to register it though.

Not a surprise. The Acrobat 8 product family passed into End of Support back in 2011.
Be well...

Printing from iPad2 in Notes, not working

Similar Messages

Maybe you are looking for