Printing from Iphone4 to hp officejet pro 8600

I am trying to print from my iphone4 to my hp officejet pro 8600 tried forwarding the email onto the printer using the printers email but the iphone4 comes back saying "a copy has been placed in your Outbox.  The recipient was rejected by the server.
Any help with this would be greatly appreciated.
thanks
Jo

Hi Jo-Winch  I hope you are doing well and welcome to the HP forum
If I understand correclty.
You are regiter to Eprint.
you already have an e-mail assigned to the printer
You are trying to send a print job thru that email and is giving the error that you describe
If that is the case then check if the email's sender (probably you) included a signature included in the email.  If thatis the case  Removed and try again.
Let me know if I can be of any further assistance. I will do my best to help you.
Hope this helps;
RobertoR   
And Remember. . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

    Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack.  Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
    So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF.   (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
    If we can't use the ADF for check printing, then how can we get the checks to print in the correct order.  Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1.  Otherwise they have to count out the exact number of checks & place them in the tray.  Or reverse all of them which is not an efficient either! I hope this makes sense.

    Hi @kceacct ,
    I see that you would like to know how to print out the checks in order. I will do my best to help you.
    The ADF can be used for copying, scanning and faxing.
    From the print driver you can only select the tray that you want to print from.
    Changing Print Settings in Windows 8.
    You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro

    I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus.  I'm using a Macbook Pro running Yosemite.  
    I would like to print on a card stock that is 4.5 in x 13.5 in.  I have tried under Page Setup to create a custom size under Manage Custom sizes, however, I'm hitting a brick wall.  The printer gets the job but can not feed the paper.  I've also tried to set my default paper size under my System Preferences/Printers and Scanners to be this size...still not working.
    Please help!

    Hi @klinecard 
    It is important to ensure the paper size you are selecting is a supported size, and make sure the weight is supported too.
    Printer Specifications for the HP Officejet Pro 8600 e-All-in-One Series Printer Series
    Please look under paper handling.
    If your desired size and weight is supported, you might find the following helpful; Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X
    Truthfully, since you are not getting an error message, I suspect you have correctly setup the custom size, this issue is most likely the printers inability to feed the paper you are using.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How do I print grayscale with an HP Officejet Pro 8600?

    I have an "HP Officejet Pro 8600 Pro e-All-in-One" printer. Can I print grayscale or black and white with it?
    I'm running OS X 10.8.2 Mountain Lion. In System Preferences for Print & Scan, I chose the driver called "HP Officejet Pro 8600" (rather than the default of "AirPrint"). In the print dialog box, under "Color Matching", I select "ColorSync" rather than "Vendor Matching" and get a list of seven ColorSync profiles as shown below, none of which are grayscale or black and white.
    Am I simply out of luck because HP hasn't provided the necessary feature?

    With the most recent batch of printer drivers, the vendors have provided their own grayscale setting rather than creating a ICC profile and adding it to the ColorSync library. So if you set Color Matching back to Vendor and then change from the Color Matching menu to one of the HP menus, maybe there is a Grayscale option available this way.
    With reference to my Canon MP990, I don't use HP so don't know the menu names, I have a Quality menu and within here is the Grayscale setting.

  • Printing Envelopes Issue with HP Officejet Pro 8600

    I have recently purchased the HP Officejet Pro 8600.  I am upgrading from the Photosmart series.  I use Windows 7 64bit operating system.  I have no error messages
    When I print a #10 envelope, the return address in the top left is partially cut off.  I can't seem to adjust the margins to allow for the return address to print.
    Additionally I would like to "save" some custom envelope sizes to accommodate my personal greeting card envelopes.  My other printer allowed for more paper sizes than this one does.
    Can anyone offer any suggestions with either of these issues?
    Darrell

    Hi there dlfant,
    Check out the post here from Travis_C. He has some steps for installing other printer drivers that should give the functionality you are looking for and hopefully address the envelope issue you are experiencing. Give his steps a shot and let us know if it works out for you.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Needing a 'print preview' capability for HP Officejet Pro 8600 (model N911a)

    Please provide a 'print preivew' capability via the HP 'print window' for the 8600 Pro.
    I purchased this machine in early April 2014 after the prior printer (photosmart 410) 'threw-up' ink inside the printer.  The software with that Photosmart 410, prior (and perhaps some current) HP printers provide a 'print preview' capability.
    I have several systems (some Windows Vista; some Win-7).  All are current with maintenace (including HP S/W & drivers).
    The printer is ethernet-cable connected to a 'switch' and in-turn ethernet-cable connected to a wireless router.  Some PCs are also ethernet-cable connected; others are wireless connected.
    The ability to do a 'print preview' via the HP S/W is not available on any system (i.e. via the 'print' window or subsequent windows, like 'Properties' or 'Advanced').
    While some applications have a print preview capability, not all do.  Having that capability via the printer 'window (i.e via HP provide S/W) is necessary - it is useful to make sure formating is proper, allows for subsequent changes if needed, and provides the abiloity to see and select the printing of only some pages.
    This issue and request has been raised several times - going back to 2012.  Just do a search on the Forum using keywords '8600' and 'preview'.  The following are a couple instances:
    1)  http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Automatic-print-preview/m-p/1529879...
    2)   http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Where-is-Print-Preview/m-p/3299717/...
    3)  http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/8600-Pro-no-print-preview-Can-I-use...
    Jim

    Hi DragonflyFairy,
    I understand you would like to know how to get the print preview when printing from the internet.
    Depending on what browser you are using, you should have the option to do the print preview.
    I have provided 3 different browsers with how to get to the print preview.
    Internet Explorer: Go to file, print preview and make your adjustments.
    Google Chrome: Go to the icon in the top right corner and click the icon with the 3 lines, click print, make your changes.
    Firefox: Click on the tab Firefox dropdown and select print, print preview. Change your settings.
    If you are missing the print preview, take a peek at these documents to see if it will help.
    Unable to print or view the print preview of a webpage in Internet Explorer.
    Fix printing problems in Firefox. 
    How to print websites.
    I came across this article that you may want to take a look at, if you are using Google Chrome.
    Printing Problem - Will Not Load Print Preview.
    Try another browser if you are having the same issue.
    What browser are you using?
    If you need further assistance, just let me know.
    Have a great weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't print all docs to HP OfficeJet Pro 8600 Premium

    I just bought the 8600. I can print Word, Excel and PDF documents from my HP HDX 16-1140US notebook just fine. The notebook runs Windows Vista and the network connection is wireless. 
    I also have a Dell Inspiron 530 desktop that was upgraded from Windows XP to Windows 7 about three months ago. It's connected to the network via Ethernet. The only documents it will print come from Word. When I try to print from Excel or Adobe I get a message that there's no network connection. I used to be able to print everything despite the upgrade to Win7.
    I installed the printer on both machines using the HP DVD. Due to problems with our phone lines that our wiring guys need to address, I haven't installed the fax yet on either computer. 
    Our service provider for phone and Internet is u-Verse. They just installed a Motorola NVG589 modem/router a few days ago to replace a 2Wire that got fried in a power outage. (It's probably not a surprise to you then that our wiring guys need to get involved too...)
    I'm slowly remembering to turn the printer on before I send a print job, so I check the power button first when I get a "network disconnected" message. (I'm just not used to the power-saving functions of the 8600 yet; I had a 6500n for nearly five years.)
    I hope this is enough background to help you tech-types help me. Thanks a million!

    Hi,
    I see that you are having some issues when attempting to print.
    Are you able to access the EWS page using the IP address assigned to the printer. http://192.x.x.x. If you are able to access that I assume your network is fine.
    Have you tried to reinstall the HP SW. I suggest you reinstall the software. Please ensure to uninstall before reinstalling again. You can also get the latest SW from HP Support site at http://www.hp.com/
    While I am an HP employee, I am not a expert on all our products. If I offer advice, I'm not speaking for HP on how to solve an issue, but I'll do my personal best to help you. Was your question answered? Mark it as an Accepted Solution! See a great post? Give it a Kudos! 

  • Wrong color balance on prints from new HP 8500 Officejet Pro

    Color prints are too red. We are printing a photo of an earring in which the original colors are all blue and silver-white, but in the print the blue parts have pink tones. How to fix?
    HP Officejet Pro 8500 Wireless All-in-One Printer - A909g, model number CB023A.
    The machine is new. We have not yet gone through the very first print cartridges.
    How can we adjust the print color balance?
    Thanks.

    Mr. or Ms. Miles:  Thanks for your reply - I acknowledge you are responding in good faith and trying to be helfpul.  However, whether it's Dell or HP or Verizon, I just wonder why, whenever I start a telephone call, chat, email or forum thread with a technical issue, my simple precise question is always ignored by employees of the big company.  Your team of incapables in India could not answer my question which is why I posted in this forum. 
    I asked above what we can do to correct the color balance on prints with our brand-new HP Officejet Pro 8500 Wireless.  I even wrote that the machine is so new we have not yet gone through the initial ink cartridges.  Your response above was not to tell me how to adjust the color balance -- which is my precise request -- but to ask me a question:  to ask whether I have checked the ink levels.  All right, I'll answer: yes, we have checked the ink levels, and they are fine.  In any case, the machine would not ADD pink to a predominantly blue photo if one of our ink levels were low.
    Please make it easy for me just this one time - how do I correct the color balance when I make color prints on our brand-new machine?  It is adding pink - how do I fix that?
    Warning - when we bought the machine only a few weeks ago, I bought three years' full on-site replacement warranty.  If you cannot help me fix this problem, the eventual fix is going to be HP's complete replacement of this machine, at HP's expense.  I don't need that if we can get true color out of the machine.
    Please focus on my question and answer my question:  How do I correct the color balance when I make color prints on our brand-new machine?  Thank you.

  • My HP desktop computer won't print anymore to my HP Officejet Pro 8600 wireless computer

    I don't know when it stopped printing. I do have to hard

    Hi ncook1970,
    It looks like your post was incomplete.
    Please first try the HP Print and Scan Doctor.  It can find and fix a number of problems of this type.
    www.hp.com/go/tools
    I was an HP employee.
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing files stored on a NAS with an Officejet Pro 8600

    Sorry if this has been asked before but if it has I can't find it
    Is there an app which will allow me to print some commonly used forms which I have stored on my NAS? (A bit like the Google docs eStorage app but direct from my NAS )
    Thanks

    Hello eimajgraham,
    Welcome to the HP Support Forums!
    Regarding printing from "NAS" to the Officejet Pro 8600 via an App, it would depend on the file format and if the "NAS" supports printing via an App.
    What is the type device the App would be installed on, Apple, Android, etc? You could try using the HP ePrint App.
    HP ePrint Mobile App FAQs<---
    Let me know if this information as answered your questions.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

    Products:
    HP Officejet Pro 8600
    Macbook Pro (Mac OS X, Version 10.7.5)
    Macbook Air (OS X, Version 10.8.2)
    Question:
    Why did my Macs initially print fine, but now will not print at all?
    Full Story:
    I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
    The HP Officejet 8600 was added to my network about 2 months ago.  
    I added a Macbook Pro and a Macbook Air about 3 weeks ago.  Both Macs printed just fine for about a week.  Then suddenly they stopped.  I spent about 2 hours on the phone with HP Service, and they finally said it must be my router.  So I called Netgear.  Netgear was useless!  They wanted me to agree to charges for services before they would even discuss the issue.  
    Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
    The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600.  The PCs print fine.  
    The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
    Please help, I appreciate any support.  
    As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
    Thank you,
    This question was solved.
    View Solution.

    Hi,
    More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
    First try unplugging the router for 30 seconds.
    Plug it back to the power and wait for 2-3 minutes.
    Turn the HP printer Off and back On, then check for any difference.
    If the same persists, try changing your router configuration as following
    Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
    Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
    Click the Advanced tab.
    Click the Setup option from the menu, then click on WAN Setup.
    Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
    Click the LAN Setup on the same Setup menu.
    Set the RIP Version as RIP-2 and Apply the changes.
    Reboot your router and then check for any change.
    I hope you may find that information useful, you may also use the user guide below for further information:
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

    Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
    OS: Windows 8.1 64 bit
    I noticed the problem: After I scanned a medical card that was 80% cyan.
    Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
    Only occurs during color scanning or copying.  I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
    If I had scanned the small O'Riley's note in black & white there would have been no streaking.
    I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
    I sincerely appreciate your assistance.
    Rene'

    Hi @Veritasabt, 
    I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
    Try scanning again to see if you have the same results.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp officejet pro 8600 all in one prints but won't scan

    I have recently moved house and changed my wireless router from BT to Virgin.
    I am running OS X 10.9.5
    I am able to print from my mac without issue, however, it has stopped scanning. I have managed to get it to work twice on isolated instances but it won't work consistently.
    I have unistalled the software and reinstalled via the HP download page but when I open HP Scan and click scan it asks me to choose which scanner - mine is selected, it then says preparing to scan and it does that for ages until it says it can't get a connection.
    My printe r is a HP Officejet Pro 8600 All-in-one N911g - I am not bothered that much about scanning from the printer to the computer (I have tried to enable this option and it won't let me) I just want to be able to open HP Scan and press scan and it scan on my computer.
    Any advice appreciated - thank you

    Hi there @Steph390 , welcome to the forums!
    I have some suggestions for you to hopefully correct the scanning issue you are having. Please feel free to reply back and let me know the results!
    1. Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer.
    2. Mac OS X: How to reset the printing system
    3. Repair disk permissions
    4. Restart your computer.
    5. Re-add the printer
    Once the printer is connected on the network, follow these steps to maintain the wireless connection, normally a static IP will help out quite a bit: Printer Does Not Maintain Wireless Connection
    Good luck to you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro 8600 Plus "unspecified printer problem"

    I just set up my HP Officejet Pro 8600 Plus e-All-in-One.  The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer.  When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer."   When I check the printer pannel, there are no problems reported.  The machine seems to print okay, but I'd like to clear up this error that is shown.  Any ideas?
    Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting.  Thanks.
    This question was solved.
    View Solution.

    HELP!
    I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
    Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
    I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
    I'm a step away from taking this back and buying an Epson.
    My experience with their support has bee stellar at a commercial printer level.
    This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
    any help will be appreciated.

  • Printing duplex with HP Officejet Pro 8600 causes windows 7 OS to shut down/restart

    Why when printing duplex with my HP Officejet Pro 8600 printer it causes windows 7( 64-bit) to shut down/restart. Windows message is "Windows has recovered from an unexpected shutdown.  I've ran HP Hardward Diag. Utility and Print and Scan Doctor which indicated everything is working properly with the printer.  Ocassionaly I can print duplex without windows shutting down and restarting, but most of the time it creates issue with Windows causing it to stop and restart.  Single sided printing seems to be fine.  I've already oncehad windows to "Startup Repair" in which ccase I selected restore to a previous working point.  Everything worked for awhile then a duplex printing session starting causing windows to shut down again.   THanks for your assistance.

    Yes, the updated USB 3.0 driver corrects the issue and should be installed.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for