Printing from my macbook laptop to canon mx922 printer

I am trying to connect my MacBook laptop to print to a Canon MX922 printer.
I can connect via USB (and it prints successfully), and I can even send a wireless 'test print' page, however I want to print wirelessly.
I am connected to the wireless router (airport) and I am successfully able to print from an iPhone and iPads without difficulty.
However, this is proving to be very difficult.
Attached picture is the code I am getting when trying to print.
When I click Print, I can see the printer, then I select it, and then it does not let the "Print" button get dark to be selected.
If I click return the attached picture is what I get.
Help!?!?

Hi Pahu,
All connected..thank you for your time in trying to assist.
Have a great day!
Angie

Similar Messages

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

Sure can.
With a document open in Pages, select to print so that you can see the print dialog as shown below.
Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

Black line down middle of copies from Auto Document Feeder. Canon mx922.

When printing copies through te Auto Document Feeder (the feeder on top) of my Canon mx922, a black line appears down the middle of the page. How do I clean the ADF/ fix this problem? Thank you.

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can I download photos from my macbook to a Canon Selphy CP760 printer

I have a Canon Selphy CP760 - a nice compact printer. All of my photos are on my MacBook - none on a card from a camera. Can I download photos from my Mac to the little printer? I have tried using a thumb drive/flash drive, but the printer says it is an unsupported USB devise. P.S. I am technically challenged!

That makes more sense...
You can print photos directly from iPhoto to your computer.
Help here > manuals.info.apple.com/en_US/iPhoto_08_Getting_Started.pdf

How do you setup a canon mp620 to print from a Macbook Pro?

How can i print from my MacBook Pro with a canon mp620 printer? I have the printer setup with a PC via USB and want to add the MacBook as a new computer and print wirelessly. I have tried the installation cd and updated drivers from canon website but it still wont work.

I have managed to get my working. Firstly, I googled the CUPS drivers for the printer and then downloaded those from canons website. I then went to print and scan in system preferences and noticed that the printer had appeared there. I believe it was those drivers that made the difference but i was fiddling for hours before that so i cant be 100% sure how i got it to work.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

I have an MS word doc saved from a Macbook in my flash drive. Now i want to print this from an IBM compatible laptop. problem is -- I can't access the file. Please help.

I have an MS word doc saved from a Macbook Pro on m flash drive. Now i want to print
th same doc from an IBM Compatible laptop. Problem is, I can't access the file. Please help.

I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

HI
I have recently bought a Canon MP230 printer and connected to my Mac Mini 10.8.3 usb port.
To setup the printer I downloaded the latest driver from canon web site and install all of them
When I issue print from my mac mini it works fine.
Next step was to issue print from Windows 7 laptop .
To do that I intalled Bonjoure in my Windows 7 latpot and set the printer connected to MAc Mini as default printer.
Upto this point every thing works fine.
When I tried to issue print from my Windows 7 laptop the printer gets activated the power button start blinking . But it just pass a page from
input tray to out tary without printing a single line. I have looked into cups server page at my mac mini. It shows that the job fired from windows
laptop was done.
I treid a lot debug it myself . But no luck yet.
Please help me. I am very upset.
Thanks
Anirban

I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now. I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one.

I have a Canon MG3520 and it keeps saying it's OFFLINE and it won't let me Print from my MACBOOK Air

Hello, I have a Canon MG3520 and it keeps saying it's OFFLINE and it won't let me Print from my MACBOOK Air. I purchased this printer in late Dec 2013 and it HAS worked before & continues to "make noise" when it is turned on. This is Very Frustrating and Inconvient since I have a Business from my home. Please Help asap! Thank you, Tracey

traceyss--this might work on mac air: on google cloud print i went to the cloud site http://w.x.y.z(put in your numbers) and then menu-utilities-energy saving settings, where i turned off "auto off" (clicking on it leads you to this choice) and turned on "auto on." then i turned off printer and restarted in 5 seconds to get the changes into the mg3520's little brain: so far, so good(on a chromebook). hope this works for you!--ceaisland55

Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
When I try to print from the Dell laptop the printer reacts, but nothing prints.
I have run through all of the troubleshooting in the support section online. Any advice?

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

My wireless printer appears as offline on my Macbook, despite being visible on the network and printable from a Windows laptop on the same network. Was fine previously. Any thoughts?

I have a MacBook Pro running 10.6.8.
I have a wirelessly networked printer (HP PhotoSmart D110).
All worked well until a couple of months ago.
For reasons unknown, I stopped being able to print wirelessly to the printer from the Macbook. It appears as offline on the HP Photosmart utillity that pops up.
I can print to teh same printer from a Windows PC on the same network.
I have also logged onto the printer, using it's IP address and printed its test page, so obvioulsy not a printer fault as such.
The old PowerBook on the same network doesn't print to it either.
Grateful for any thoughts for quick tests or tips.
Paul.

Nice one Ron, you're a star.
That was a complete fix.
My preferences was slightly different, but it was the same approach.
I had 4 printers listed. Some old ones that I no longer had and the one that didn't work. I deleted all of them, then hit '+'.
It came back up, searched for new drivers, then I was able to print as per normal.
Result.
Paul

Print on dvd using Canon mx922

I am trying to print on dvd using Canon mx922. Canon software (image garden and photprint ex) do not recognize printer using iMac running 10.7 and macbook air running 10.8. Canon has no solution and referred me to Apple. Anyone have a workaround? Any other software to try?
Thanks.

When you select to add the printer and you see the little pop-up window under the plus button with a heading of Nearby Printers, don't select the MX. Instead, click on Add Printer or Scanner. Then with the Default Add printer window displayed, you should see the MX. It will show something like Bonjour Multifunction in the Kind column. Don't select this one. Instead wait several more seconds and you should see a second MX appear, this one showing Canon IJ Network in the Kind column. Select this and the Mac will state that it needs to get the supporting driver from Apple. Agree to this and after the driver has downloaded, you will have your alternate driver installed and ready to use.

HT201465 update broke Canon MX922 printer

Hi,
I have a Canon MX922 printer (using the Canon MX920 series driver) that I've been using for three months over WiFi. The latest software update HT201465 broke my printer. I've tried resetting the printing system, deleting/adding the printer but nothing works.
Printing over my iPhone (AirPrint) still works, but my Mac can't use the printer for scanning or printing. It does show up as a bonjour printer and I can re-add it without issues, but printing or communicating with the printer doesn't work.
Anybody else with the same problem?
Seems like Apple dropped the ball on this update.
Thanks,
Sebastian

Sebastian-S wrote:
I can't ping or access the printer's webinterface either from my iMac or MacBook - that part makes even less sense to me. There's no access control in place.
If you cannot ping the MX or connect to its internal web page then it explains why you cannot print. What seems odd is that the device appears in the Default view of the Add printer window, as shown by your screen grab. If the restart mentioned above does not help, then confirm that the Mac is set to use the same IPv4 subnet as the MX.
If you leave the Default view of the Add printer window open, do you see another MX922 entry appear with Canon IJ Network, as shown below? This protocol is provided by the installed Canon driver, while Bonjour is part of the Apple system. Since you cannot ping the MX I would expect you don't but just want to check.

Deskjet 5440 stopped printing wirelessly from my MacBook Pro after upgrading to OS 10.8

My home printer is connected by cable to a desktop Mac (Power Mac G5). I have always printed wirelessly to it from my MacBook Pro laptop through our home wireless network. However, just recently I upgraded the operating system on my laptop to 10.8.2. At the same time, I upgraded the HP driver software (from HP) that is supposed to allow the 5440 to work with the new OS. Since then, I can print from my laptop if it is connected by cable to the printer, but not wirelessly. When I attempt to print wirelessly, get a message that says the printer is not connected.

So you are using Printer Sharing on the PowerMac? If so, on the PowerMac, go to System Preferences > Print & Fax and delete the printer with the '-' sign at the bottom of the printer list. Re-add it with the '+' sign.
Make sure that Printer Sharing is checked and that in System Preferences > Sharing that Printer Sharing is also checked there.
Now, on the MacBook Pro, go to System Preferences > Print & Scan and click the '+' sign to add the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP Officejet Pro 8600 can't print from my MacBook Air

Hi,
My HP Officejet Pro 8600 can't print from my MacBook Air. It keeps on showing "The printer is not connected", but the screen on the printer shows connected. I often reset the printer 'EVERY TIME" I want to use it. I also tried to turn off my laptop and printer several times before printing. If I'm lucky enough, it will work maybe for one or two prints. If no luck then I'll have to reset everything again. Sometimes I reset the printer, the printer will not show on my selection.
This question was solved.
View Solution.

Hello boojoo1tw,
Welcome to the HP Forums!
I understand you're unable to print most times with your Officejet 8600. How is this printer connected? Wireless or USB? What is your operating system on your Mac computer? Click here to find out.
If your printer is wireless, then I would recommend assigning a "Static IP Address" by following this HP document on Printer Does Not Maintain Wireless Connection.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

Printing from my macbook laptop to canon mx922 printer

Similar Messages

Maybe you are looking for