Printing from Organiser in PSE 8

I am trying to print the same image more than once on the same sheet of paper but do not seem able to achieve this. I am sure that in previous editions of Elements there was an option to repeat the image as many times as space allowed in the organiser print box. I am trying to print several custom size copies of an 85mm x 53mm photo of a 5in x 7in sheet. Is this possible in Elements 8? Many thanks.

Many thanks. Picture package only appears to allow you to print the specific packages as listed whereas I wish to print to a specified size and  number of the same image of images - which is not included in the standard list. Any further thoughts. Many thanks

Similar Messages

  • Can't print from PS or PSE but can from Aperture and Pages

    I suddenly am unable to print photos from my iMac running 10.6.6 with Photoshop CS5 or PSE 9 to my Epson SP 2400 (FireWire on the iMac) or 3880 (either connected to my MacPro and addressed through WiFi, or connected to the iMac thru USB). Everything seems to go normally until I press Print, then nothing happens. When I select Preview or PDF instead of Print, I get a blank page. I THINK the problem may have begun only after I updated from 10.6.5, but I'm not certain, and it could have begun only after I upgraded to PSE 9 but again I'm not certain. Prior to making any changes, printing worked normally with PS CS5 and PSE 8 under 10.6.5. Drivers are up-to-date.
    Printing a text-only document from Pages on the iMac to a WiFi-connected laser printer works fine.
    Printing a text-only document from PSE 9 or on the iMac to a WiFi-connected laser printer, curiously, also works fine.
    Printing a photo from PSE 8 on my MacBook Pro updated to 10.6.6, thru WiFi, to the 3880 on the MacPro, works fine.
    Printing from Aperture on the iMac to the 2400 thru USB works fine.
    Printing from Aperture on the MacPro to the 3880 thru USB works fine.
    Printing from Aperture on the iMac thru WiFi to the 3880 on the MacPro works fine.
    As I write this, I'm recognizing for the first time that the problem seems to be in printing a photo either with PSE 9, or with PSE 9 installed on the same computer from which I'm trying to print with CS5. Rather than not post this until I've done some experimentation (like installing PSE 9 on the MacBook), I'll go ahead and post first and hope to hear from the Voice of Experience.
    Anyone?
    Message was edited by: hlritter
    Message was edited by: hlritter

    Re the driver affecting pdf printing, the answer is no. The print to pdf uses internal processes and is not impacted by the vendors driver. So given that Rosetta was no help and Word is also failing, then it suggest that the core printing system is at fault. Although the ability to CS2 to print is a 'curve-ball'. The CS2 suite does things differently when it comes to printing but it still eventually uses the core printing system to get the file to the printer.
    So, some things to try....
    1. Install the 10.4.9 Combo update. If you did the sequential update from 10.4.8 to 10.4.9, then this update can fill missing holes.
    2. Get Fixamac's Printer Setup Repair utility to see if it can identify any issues.
    3. Get Gutenprint 5.0.0 and try adding a printer using one of these drivers.

  • Printing from Editor in PSE 8 on Windows 7

    When I try to print from the editor I get a message stating that I must install a printer first.  My printers are installed.  When I go to the organizer I can print without getting this message.  How do I fix this problem?

    On a MAC it does seem to stick on the last option you saved e.g. Jpeg if it was a Jpeg image.
    For windows, this seems to work:
    Find the file PhotoshopElementsEditor.exe using explorer (in the C:\Program Files\Adobe\Photoshop Elements 8.0 folder) right click on that file and choose Run As Administrator.
    Go back to the editor, open an image, select Save for Web and choose jpeg; then save that file. The next time you run the editor and use the save for web command the jpeg type should hopefully stick as the default.

  • Images not opening from organiser into pse 11

    Hi just downloaded trial version on mac, running mountain lion, when I select an image in organiser and click open in editor the editor opens but doesnt load an image.
    Any help, thanks

    sorry for delay, been away. formats are jpgs and tiff, tried short cuts, the only way is to open a file from finder on mac it will open with editor. also if open picasa organiser it will then open from there? but not from elements organiser, got in touch with adobe who said cant help as trial version !! really going to inspire me to buy. I may try uninstalling and re downloading. seems like a great editor. organiser is good but one massive thing left out, 100% zoom to check focus etc. thanks for yur help

  • Borderless printing from PSE 7 Editor

    Having some trouble printing borderless 4x6 images from the Editor in PSE 7, (I prefer printing from the Editor over the Organizer due to its higher quality output).  I've tried a myriad of different settings from the Elements print dialogue window and am unable to consistently print images without some border being present, either just on one side, or on a top and side together.  Sometimes I can successfully print without the borders, but then when using the same settings on another image, I'm frustrated to see some type of border return.  The image in the print preview window will also vary from one image to the next, sometimes with borders, and sometimes without, however even when no borders are present in the preview, they'll still be there sometimes in the print. Never had a problem like this with Elements 4; using an Epson R1900, with printer driver set to borderless. If anyone else has encountered this, or has suggestions on what to do, I'd love to hear from you.  Thanks!
    Ethan

    Yes seems this is a bug. I will try using printing in PSE 8.0 when it will be released.         

  • PSE 9 hangs when trying to open preferences from organiser ? and PSE 10

    Moved from PSE 4 through every version til 9
    Windows 7 (64bit) 8gb ram
    Now find that PSE 9 hangs with the banner "loading" when trying to access prefernces from organiser.
    I have already:
    Reinstalled elements
    Reapired catalogue
    Removed and recreated preferences file
    Removed catalogue
    Created new catalogue
    Removed PSE 9 removed all traces of adobe from pc
    Reinstalled PSE 9
    All to no avail..........
    Adobe wont help as not "current" product yet i have had it less than a year ? is it my fault they have changed it again ?
    Some say upgrade but what if thats the same ? Why upgrade when current software seems faulty ?
    has anyone had this problem and managed to fix it ?
    Just downloaded trial version of PSE 10 and its exactly the same !!

    Tried that but it didnt work
    I have also downloaded PSE 10 and it does exactly the same !
    I can access via edit page but the source files, colour setiings, etc can only be amended from organiser ?
    Are there any known issues or compatibility issues ?

  • Failure to print from PSE 9.0 on MAC to Epson XP-800

    I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem.  The problem persists even if I try using a cabled connection rather than WiFi.  I have ensured latest software from Epson has been downloaded.  This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
    Any suggestions for solving this rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
    Grateful for any help.
    Stuart

    Hi Barbara B
    Thanks very much for this suggestion. 
    I followed this advice, both deletions and permission repairs.  This did allow me to print from PSE for the first time - very pleased with this.  Unfortunately the colour reproduction has now gone haywire (having been very good) and there are vertical lines on prints - this now applies to both PSE & iPhoto (the latter worked well before)
    Any further suggestions?  I feel we are close to cracking it but do not really understand what to try next. Please help if you can. Many thanks.
    Stuart

  • PSE 10 will print from the organizer and in sharing mode, but not from full edit

    I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer.  The print function works fine while in organizer and sharing mode, but not from full edit.   When I try to print from full edit, I get an  error message with a red "X" on it that says:  "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer."  I can't figure it out.  The printer is in "ready" state, and works fine in the organizer mode, and in share.  Any thoughts on what I'm missing? Thanks for any help in advance.

    This occurs frequently with HP printers, though  others are implicted as well from time to time
    In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
    http://kb2.adobe.com/cps/865/cpsid_86566.html

  • Printing from Elements 9 Organizer causes PSE to crash

    Whenever I try to print a picturem from Elements 9 Organizer, a window pops open that says: "Elements 9 Organizer has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."  The window contains no error code or further information. My printer is an HP PSC 2170, and the most up-to-date driver already comes with Windows 7, which is my operating system. (I still have Elements 7 on my machine, and it can print without difficulty.) Does anyone have an idea how to fix this major problem with Elements 9?

    We have the same issue, running Elements 9 and Windows 7 SP1 64-bit, and have tried a complete uninstall of Elements, reboot, re-install. We had added a new printer recently, so we also tried removing the printer and restarting. I've tried updating Organizer to 9.0.3, but the problem still occurs.
    We can print any picture from edit mode, but if we select a picture or pictures and try to print from organizer, it crashes every time.
    Anyone have ideas for further troubleshooting?

  • Printing from PSE8 Editor

    Can anyone help me with a problem I have printing from PSE 8 Editor.
    I keep my unedited photos in PSE8 Organiser. When I am trying to select the best photos from a group of, say, ten photos for printing I open all ten in PSE8 Editor. I now edit each photo in the Editor and examine them to see which are the best ones and I will wish to do a trial print of each of those. This is where I hit the problem.
    If I select one of the ten photos open in Editor and try to print it I will get a strip down the left side of the Editor screen showing all ten photos. If I want to print just the selected one of the ten I have to remove the other nine from this list or all ten will be printed. If the photos are all very similar it is difficult to select visually which ones to remove from the list because the list does not show their names.
    What I would like is to:
    a) eliminate this list feature altogether so that only the photo I have as the selected image in Editor is printed, or
    b) have the list show only those photos I have explicitly selected for printing from the ten I have open in the Editor, or
    c) have the list show the file names so that I can at least identify the ones I don't want to print in this instance so that I can remove them from the list.
    I explained all this previously to Adobe but I don't seem to be understood. To illustrate the issue please try this. Open ten similar photos in Editor. Select one of those ten and select print. You will get a strip showing all ten down the left of your screen. If you just continue with the printing all ten will be printed. To print just the one you want you will have to identify and remove the other nine photos from the list. Having done all that and printed that one photo now select another of the ten photos in Editor and again select print. You will again get a list of all ten photos open in the Editor and you will again have to identify and remove from the list the other nine. Repeat this for a few more photos and you will be (like me) screaming with fury at the stupid thing. So, am I doing something stupid or is there a way to get around this behaviour?

    I have PEv.8, and below the work space in Editor, there is the project bin. On the left there is the tool box, configurable as one column or two columns.
    Multiple open files are represented in the project bin as thumbnails. There are 2 dropdown boxes: (1) to show open files or files from organizer (2) re bin files. Which options are ticked on your machine?
    Please post a print screen representing what you see.

  • Colour Casts in Prints From Aperture

    Hello,
    I have read reams of material on calibration and profiling -- probably too much, because I'm more confused than I
    was when I started.
    This is my set up:
    Nikon D300.
    Mac Pro + GeForce 7300GT + Mac Cinema Display (20 inch).
    Photoshop CS3 + Apple Aperture (2.1)
    HP Photosmart 8250 (with HP cartridges)
    This is my general workflow:
    Pictures imported from camera into Aperture. Best shots are roundtripped to Photoshop, tweaked and then
    re-imported back into Aperture as 16bit tiffs. A lot of these .tiffs are exported from CS3 in Lab Color Mode (I
    don't know if this makes any difference -- I'm clutching at straws!)
    This is my problem:
    A3 prints of my shots done by a local photography shop look amazing. The colours match the colours I see on my
    monitor. They're crisp and bright and everything I could wish for.
    However I have tried printing A4 prints locally (from Aperture) on my printer and there are different coloured
    casts that ruin the pictures.
    I have tried different Aperture device profiles... including the System Managed profile & the profile for the HP
    photo paper that I use and the shots have either a strong yellow cast or a strong pink cast depending upon the
    profile I use.
    My set-up hasn't been calibrated, and -- at this point in time -- I can't afford a calibrating device... can
    anyone make any suggestions as to how I can get better results printing at home through Aperture, please?
    Thank you very much!
    Adam

    I no longer get a colour cast.
    I started with 1.5 and had some books printed these were fine. My old Canon 965i was used for printing and I got some casts adn I decided to get the B9180. Just before this I switched to Aperture 2 and now 2.1. Immediately I had colour casts and through this forum I found that I was not alone. The general view at that time was that it was a calibration issue but enough people who knew what they were talking about disproved that. The various options were to print through IPhoto, PS, PSE or some other external soutce. We all to a greater or less degree had some success.
    During this time 2.1.1 came out and HP appeared to offer an updated driver.
    In my case I re-installed everything, including the printer Firmware and carefully read everything that everybody had to say on the subject, thus in ColrSync I made sure that I had the same paper specified, that I specified it in soft proofing and that I specified it in the print menu and I variously set my Gamma between 1.05 and 1.2. I no longer have the cast but usualyl I have to do some tweaking and use a few sheets. Mostly this is with adjusting the Gamma.
    I cannot understand teh attitude of Apple on this topic and some others whereby they have professionals dependent on their product andthey do not, as I woudl expect in a customer support oriented organisation, even acknowledge teh problem, let alone give out any information. I would be happer (if I was a pro) if I heard comforting words like 'We know about this, it seems to be caused by xxx and we are working on a solution but in the meantime try bbbb.'
    The principle, in my view, should be 'You be the photographer, we will provide the tools.'

  • PSE9 - Problem printing from full edit

    When I try to print from the full edit page, I click on File, then Print and the Print page pops up. I select the correct printer, hit Print and the Fax menu pops up. I prefer to print from full edit instead of from the organizer. I have a CanoScan 9000f installed, but I don't scan directly to PSE, I only scan to my computer and open the pictures from PSE. Could this be the problem or is there another solution? I cannot print from full edit with any picture, scanned or not.

    Please read related post for print issue http://forums.adobe.com/message/3275350. Go through my repies and thread and check if that resolution steps resolves your issue.
    Thanks,
    Garry

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Color quality difference by printing from the Organizer vs the Editor

    When a print the a photo from the Organizer I get a good quality print, one that closely represents the image on the computer screen.  But when I print the identical print from the Editor mode, the colors are darker -- more black pigment in all of the colors and no where near as representitive of the image on the screen.  How can I get the prints from the Editor mode to be more like the ones from the Organizer  -- more like the images on the screen?......Jim

    Organizer :
    Image Space:  sRGB IEC61933-2.1
    Print Space :   Same as Source      (What is "Source"?)
    This means that the Organizer is sending the photo to the printer without adjusting any of its colors (the default behavior).
    Editor  :
    Color Handling : Printer Manages Color
    Source Space :  Same as in Organizer
    Rendering Intent : Relative Colorimetric    (What ever that is)
    This means that the Editor is sending the photo to the printer without adjusting any of its colors.  "Relative colorimetric" means that if there is a color in the photo that the printer isn't capable of printing, the printer will chose the nearest color.  (This is the default behavior.)
    So you've verified that the Organizer and Editor are using the default print settings.  They have two different "print engines", but with a printer made in the last several years and photo in the sRGB color space, they would normally produce nearly identical results with these settings.  What's your printer and how old is it?
    My next suggestion is to download the most recent printer driver and install it (even if you already have the most recent one).  This can reset the printer settings to their defaults.
    If that doesn't work (and it likely won't), then you could consider configuring PSE to manage colors, rather than letting the printer manage colors.  But getting that to work right often can involve a fair amount of effort, reading your printer's documentation to get the printer configured properly (it's different for each manufacturer and often for different models).

  • Printed photos from Aperture 3.2.1 have lines through them - don't get that when printing from iPhoto

    I recently downloaded Aperture 3.2.1 and after editing a couple photos (love that process!), tried to print them.  Both had horizontal lines across the entire photo.  I don't have this problem when printing from iPhoto.
    As an FYI, I have this problem when printing from PSE too, but worked around it by importing edited photo back into iPhoto and printing from there.  I don't want to do that with Aperture, because they have much better printing choices.
    I have a Canon MP 500 & a Canon IP 4300 - same issue with either one.
    I contacted Canon tech support and got this reply:
    We appreciate your correspondence regarding your PIXMA MP500. I am sorry that lines are printing through photos printed from aperture.
    If aperture is the only program the issue occurs with then the print setting in aperture will need to be changed. You will need to use the icc profiles for the paper you are using. For details changing the print preferences in aperture please goto: http://www.redrivercatalog.com/profiles/how-to-use-icc-color-printer-profiles-ap erture-3-canon.html
    I looked at the link and basically had a brain freeze.  It was very complex, and I was concerned that it was for Red River papers - I use HP paper.
    I called HP to get their instructions for icc color printer profiles - complete zero.  They said it's a printer issue and would be happy to sell me a HP printer.
    Please, can anyone help a struggling Aperture newbie?  I'm so frustrated.
    Thanks - Jma

    Hello Kirby,
    Your recap is correct.  I ran Apple Software Update and both programs are up to date.  I looked on Canon's site and there are no new firmware updates for either printer.
    When I select "print" in Aperture, I've selected the Canon MP500.   Under the "Rendering" section, the color profile offers six different selections that include the MP500.  I've tried them all.  They all have lines through them.  There is a note, in grey, beneath the Color Profile box, that says to "Turn off color management in the printer driver".  I have absolutely no idea how to do that, and I've googled it, to no avail
    Under "Render Intent" I've tried both selections - Relative Colorimetric and Perceptual.  Still, lines through both.
    This is really discouraging.  Both printers work perfectly fine - with iPhoto, so it's hard for me to justify buying a new printer.  And how do I know I wouldn't have the same problem with a new printer?
    Fingers crossed that this can be resolved.  I have several photos I'm supposed to be printing for gifts.  And if the problem is in Aperture or PSE, won't the lines still be there even if I use one of the online printing companies?

Maybe you are looking for