Printing from OS9 to USB printer on Extreme Base Station. Possible?

Is finding the printer possible at all from a machine running OS9 which is connected to the Airport Extreme base station via an ethernet cable? Are there no workarounds?
The printer is an Epson Styles C84 (on the list of compatible printers) and it does show on the iMac G5 through rendezvous. Is it possible to do it through USB print sharing on one of the machines so all on the LAN can see?
I have read were the requirements to print are OS 10.2.x, but some times requirements can be circumvented. Obviously, upgrading the system is a gimme, but we're talking about parents who are set in their ways and hesitant about re-learning a new OS when they feel comfortable with one that took them a while to get used to.
Troy

It is not possible to print directly from a Mac running OS 9 to a printer connected to the Base Station. There is a convoluted workaround as follows:
If you happened to have two computers on your network, one running OS X and another running MacOS 9 you could:
- set up the Mac running OS X to print to the printer connected to the Extreme Base Station
- set up the Mac running OS X to "share" that printer
- set up the Mac running OS 9 to print to the "shared" printer on the Mac running OS X per:
Printing to a Mac OS X shared printer from Mac OS 9 via LPD/LPR

Similar Messages

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Can't print from Win2000 to USB printer via Airport Extreme

Background: I have an Epson Stylus Photo 820 printer connected by USB to an Airport Extreme base station. My iMac is connected to the base station via an ethernet cable.
Using Bonjour for Windows 1.0.3, I've set up the Epson printer to print from Win2000 in a virtual machine in VirtualPC 6 which is running in the iMac. The setup process for the printer completed OK, without a hitch. (By the way, I loaded the printer driver from the printer's disk, because the driver for the Epson Stylus Photo 820 isn't one of the drivers selectable from the Bonjour window.)
Problem: When I try to print via the route that I set up using Bonjour, an error message appears, stating:
- There was an error found when printing the document "mhtml.mid://00000047/" to IP-extreme986254.local.9100"\
(Note: extreme986254 is the name of the network I configured in the base station. Otherwise, the network is working OK. Also, my Win2000 in VPC is connected to the internet OK.)
When I re-try printing, I get the same error message.
When I hook the printer directly to the iMac by USB and then set it up as a printer for Win2000 in that configuration, I have no trouble printing to the printer.

Using Bonjour for Windows 1.0.3, I've set up the
Epson printer to print from Win2000 in a virtual
machine in VirtualPC 6 which is running in the iMac.
The setup process for the printer completed OK,
without a hitch. (By the way, I loaded the printer
driver from the printer's disk, because the driver
for the Epson Stylus Photo 820 isn't one of the
drivers selectable from the Bonjour window.)
Though for XP should also work for Windows 2000.
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
Problem: When I try to print via the route that I set
up using Bonjour, an error message appears, stating:
- There was an error found when printing the
document "mhtml.mid://00000047/" to
IP-extreme986254.local.9100"\
Printing from an Windows 2000 PC to a printer attached to an Airport Extreme Base Station
http://www.ifelix.co.uk/tech/1006.html
iFelix

Printing wirelessly to MacBook Pro with Airport Extreme Base Station

I have an Airport Extreme Base Station that I used to use wirelessly until I got Verizon Fios. The Fios technicians said the base station couldn't be used and so it's been sitting unused for a few months. However, I really, really miss printing wirelessly, and was wondering if it was possible to use the Airport Extreme Base Station ONLY to print wirelessly, and not connect it any way to my internet (I don't want to mess with any of the fios stuff at all).
If it's not possible, is there any other way to print wirelessly without purchasing another product or special printer. I have a HP c4480 printer.
Thanks!

If your printer has a USB cable the easy way to go about this in my opinion is to plug that USB cable into your Extreme base station. I have the Extreme ABS that looks like a flying saucer. I plug the usb cable into the port that has the symbol that doe NOT look like this <--> rather it looks like a Saguaro cactus.
My computer then sends print documents to the Extreme via WiFi and then Extreme sends them to the printer via the USB cable.
If your Airport status is not showing in the Mac's menubar go to system Prefs/Network/Airport and check a little box so it will show up in the menu bar.
Now if your Extreme is plugged in the wall and powered up your Mac should be able to find it. Click on that menubar item for Airport and scroll down and select your Airport Extreme. I don't know for sure what its name will be. It should still be the same as it used to be when you used it last.
Now try printing a simple document. In the print dialog window you should be able to select what printer you want to use. If your new Extreme printer is listed select it. You may need to click on Print & Fax and figure out how to select it from there, and choose it to be the new default printer.
I think this info will do the job. Whenever you want to print you have to go to the Airport icon in the menubar and change your airport connection from your Verizon stuff to your Extreme. Then of course you have to change back when you are done. That is why it would be great to toss the Verizon WiFi radio out the window and just plug your Verizon modem into your Extreme WiFi radio transceiver (router). But I understand you cannot deal with that at this time.
If this does not do the job, if I have missed something, I will bet you 5 bucks that you can still figure it out if you just look at any error messages and/or look at the Print&Fax prefs and the Print dialog windows etc. and see what I may have missed. Maybe you have to go to SystemPrefs/Sharing and allow your printer to be shared. I don't think so. The way I figure any of this stuff out is to just look at stuff and think and try things and see what happens.
Your Verizon setup should be something like this.... a cable comes into your house and goes to a 'modem'. From there and ethernet cable (CAT-5 cable) goes from that modem to your Verizon router (WiFi radio transceiver).
As for getting rid of the Verizon router, when you are ready to give it a go, simply unplug the ethernet cable (it has a plug on the end that looks like the kind of plug that telephones use to plug into the wall, except it is a bit wider, but still has that same kind of snap-lock tab) that comes from the Verizon modem (the modem has the heavy round cable and probably many blinking lights) and plug it into the Extreme. Mine has an icon on the Extreme that is many dots in a circular pattern.
At this point you may have to unplug the Verizon modem form the wall AC power and the Extreme also. Then plug them back in, wait a minute, go to your Airport icon on your Mac menubar, Select Extreme and start surfing the web.
It really is that simple with a Mac. Maybe Verizon has found a way to make things difficult but my guess is no. Any password should be taken care of in your Airport Setup Utility program. It should be the same password(s) as you used before when you used your Extreme.

Communication errors with airport extreme base station

Please help.
I am able to surf the internet wirelessly on my two macs via my Airport Extreme Base Station. However I am unable to print wirelessly via my new HP printer connected to the USB port on the base station.
More worryingly I am unable to use Airport Admin Utility, Airport Set-Up Assistant or Airport Firmware Updater. Whenever I try to use one of these applications they experience errors communicating with the base station. I wonder if this is related to the printer problem?
I have performed soft and hard resets on the base station in addition to removing the power cord - none have been sucessful.
Can anyone please help me.

I may have a solution. I recently upgraded from an ibook to a macbook pro, and had the apple store "migrate" my files, etc., from one to the other. Got it home, everything's fine, airport conects, no problem. Go to print, can't print, decide to run Airport Setup Assistant to reconfigure (why not ?) and, lo. when it gets to "Network Configuation," I get : "An Error Occured while trying to communicate with this base station." Try all the usual tricks, including hard restart (internet connection is fine throughout), but the set-up assistant couldn't get past that point. Talked to apple support, we ran through all the options. He did suggest wiping the network preferences for airport off the harddrive and starting over, but since I had a good internet connection, I decided to wait.
So here's the thing: I got on Airport Administrative Utitity, clicked "Configure," and then "Network." I know next to zip about advanced options, but I decided to click "Distribute IP Adress" And under "Airport Client Computers" selected "share a single address." I left everything else alone. It reset to to the new options, and then, out of curiosity, I opened up set-up assistant, and TA-DA, I got past the screen I was stuck on, and when the next asked me if I wanted to keep all the same settings, I said yes. I kept selecting "Keep/yes", and then saved or okayed the changes. I then got a message that it would restart base station, I was also configured to print (my printer hp laser 1320 was plugged into the base station for all this), and, yes, it does now print.
I don't know if this is the hard way of doing something that I could have done more easily, and/or if even though I had an internet connection, the base station or the set up was still looking for the ibook. I'm sorry for such a long reply, but wanted to include all the steps I took and the exact situation. Does anyone know if I've endangered my security by checkig the "Distribute IP option ?" This is a home computer. Good Luck and hope this helps someone

Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

Extreme Base Station Loses Connection When Slept

To improve overall system security, I recently changed my account from an Administrator to a Standard Account, and created a separate Administrator's Account. Now whenever I or another user start up from sleep mode, enter our standard user password, the airport connection is lost and an admin password is required to get it going again.
Is there any way to ensure that the connectivity is not lost when sleeping, or it is automatically reconnected when awoken from sleep, without the use of an Administrator's password?
2GHz dual G5, ATI X800 XT, 2 X 500Gb HD, LaCie D2 1Tb, 3.5Gb RAM , 23" HD Panel Mac OS X (10.4.9) Airport Extreme 802.11 (n) / 802.11 (g) on on G5 Mac Pro

djeddy, Welcome to the discussion area!
When switching the cable modem's Ethernet connection from the MacBook to the AirPort Extreme base station (AEBS), you should power off the cable modem for a minute or two (often longer).

Airport Extreme Base Station as bridge for Westell DSL router

I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
Here is the situation (I rent so chances are we will not be moving hardware anywhere):
- Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
- One lonely Powermac G4 upstairs that does not have a wireless card
- One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
I don't understand why the AEBS seems unable to see the DSL network.

Hi,
Well, what I have been able to do is this:
I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
Anyway, I digress...
What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
Best regards,
Patrick
Macintosh G5, Powerbook G4 Mac OS X (10.4.7)

Connecting our Xbox360 to our existing Apple Airport Extreme Base Station.

We have an existing Apple Airport Extreme Base Station at home (connected to a Motorola brand Cable-DSL Modem). This wireless network works magnificently for our PowerBook and iBook... and even for the PC laptops a couple of our "friends" have brought over (and they have to work outside on the porch, since we don't let them in the house with those things).
We broke down and purchased the Xbox360 along with the Xbox360 Wireless Adapter, but I can't get it to connect to our network wirelessly. It connected automatically though, when I used the ethernet cable from the Xbox360 to the Airport Extreme Base Station's output port.
Our wireless network is hidden, and we'd really like to keep it that way for security reasons. Does anyone know if this is possible? Or do we have to sacrifice our network security just to be able to connect wirelessly... so we can get the latest version of that damm Bejeweled game... okay, and play games online... and get HD Movie Trailers that look amazing... I actually am excited about that part.
1.67GHz, 17", G4 PowerBook (03/2005) Mac OS X (10.4.6) 2GB RAM (maxed), using Airport Extreme Base Station with a Motorola Cable DSL Modem

Thanks for the info iFelix. And wow, speedy too. You
must be a fast typer. (I'm just a Hunt-&-Peck kind of
guy.)
No not too fast I can cut and paste from my file of usual responses.
I'm not really "that" worried about security. We just
have a couple of those "nosey-neighbor" types living
close by, and they both work in I.T. I sound a little
paranoid, I know. But you'd understand if you met
these guys.
Use WPA and they won't be able to access your network even though they can see it.
So I should reset the Base Station to WPA?
Yes
Is that
the factory setting?
No
A guy I work with said I need to
reset the Base Station to "Factory Settings" to get
the Xbox360 to connect wirelessly. Is this true?
Yes, but then you would have no security!!!
And for the password, I shouln't use any real word(s)?
Applications > Utilities > Airport Admin Utility
Scan and Select your Airport
On the Airport Tab
Change Wireless Security
Use WPA Personal
Use a password like this:
4fghj8eybs9nf78swnu
Remember to write it down.
I would also change the Wireless Network Name as well, but this is not needed.
Click OK
Click Update
You will now be thrown off the wireless network.
Wait at least five minutes.
The from the Airport icon in the menu bar, select your network, you will be asked for your password, enter the password, check keep in Keychain (so your Mac will remember it).
That's it.
Don't worry about using anything else, WPA is pretty much uncrackable unless you use a dictionary word for a password such as "table".
iFelix

I am having problems printing from my iPad via my AirPort Extreme network.

I am having no success printing from my iPad via my AirPort Extreme based local network. I can use this to print wirelessly from my iMac OS X 10.7.5 and MacBook Pro OS X 10.6.8. I have 2 printer options: HP Laserjet (B&W) P1005 hard-wired to the iMac and HP Photosmart 7760 hard-wired to the AirPort Extreme. I believe I have checked all the correct boxes to enable the network and the iPad to connect, including ensuring that it is using the same network but when I try to select a printer I get the message that no printer can be found. Will it not work with an AirPort Extreme based network or only if this is connecting to wirelessly enabled printers which I do not have.
Thanks for any suggestions.

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

Something has changed recently and I haven't figured it out. My 2 Windows XP computers are no longer able to print via Bonjour. I have tried removing and reinstalling Bonjour. Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop. Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que. Both XP computers have no problem using the internet via the Base Station. One is wired and one is wireless. Thoughts?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

Recognizing a printer attached to an Airport Extreme Base Station

I have attached a printer to the usb port of my airport extreme base station. The printer is recognized by two of my MacBook Pros running Mac OS X version 10.4.11. However, it is not recognized by my latest MacBook Pro running 10.5.2. Is this a problem with the new system, or is there another reason? I have, of course, made sure that the printer drivers are installed, and the printer attached to the Airport works with the new MacBook Pro when connected directly through a usb port on the laptop. Any help will be gratefully received!!

samandlily wrote:
I have something related to this topic going on. I have an Epson printer on my Airport Extreme via a USB. Just recently when I try to print from my iMac, I get a message saying that "the Airport Network is busy, and it will try again in 10-20 seconds". Then nothing happens and the document will not print. Any ideas what is going on?
Please do not pollute the OP's thread by posting here. You are clearly experiencing a different problem - different symptoms, different version of OS X, different printer - and will get much better help if you start your own thread because your problem will get lots more attention that way.
- cfr

Airport extreme base station with Hp 3210 all in one printer

Just bought and hooked up the above. Using with iBook G4. Still dealing with dial-up unfortunately, but got online just fine. When I tried to print on the above, it immediately dialed up when I hit "print". ?? What's going on?

I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
No the problem is with the HP driver.
Try using the HPIJS drivers.
For those with the older base station.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?
No, not via the USB port.
Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Airport Extreme Base Station with HP Printer problems

I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?

I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
No the problem is with the HP driver.
Try using the HPIJS drivers.
For those with the older base station.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?
No, not via the USB port.
Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Help - Kodak 5300 printer doesn't work w/ Airport Extreme Base Station

Hi All,
Running a MacBook on OS 10.4.11 (airport extreme card) and an I-Book on 10.3.9 (airport card) - just bought an airport extreme base station and a Kodak 5300 all-in-one printer. Base station works fantastic with internet and both CPUs. Kodak printer works great when directly connected to laptops by USB. When printer connected to USB port on Base station it recognizes printer but wont print. Set-up printer with Bonjour settings - but printer won't print with WiFi. "Printer not responding" window appears. Have phoned Kodak support. They tell me the printer should work on Wi-fi but I should contact Apple. Have phoned Apple support - they're stumped. Kodak website recommends using a Silex wireless router with this printer and claims it is compatible - so it can handle wireless set-ups.
Has anyone out there had success with the Kodak 5300 and the Airport Extreme Base Station? It's a great printer that uses very little ink (inexpensive cartridge replacement). I really don't want to fall back on my old Epson.
Thanks for any thoughts/solutions.

Hi Ron! Thanks for checking inside Kodak. I agree as a first printer from kodak it's a good one, and I certainly appreciate the attempt to buck the industry-standard of milking the customers on ink.
However, I'm not willing to go buy a silex device, when I already HAVE a device: the apple airport. I also got a reply from kodak support indicating that they didn't want to comment on future products, etc etc. Maybe I'm misreading this by assuming product == hardware, but I'm certainly not willing to ditch my current printer for a newer model for what I consider to be a DRIVER issue (I could be wrong of course). Maybe a firmware issue, but certainly not a hardware issue.
What I expect from Kodak is a new driver and/or firmware that would make this work with the apple airport. On the one hand I can understand not wanting to divulge company secrets and upcoming "products", but for a newer driver, I would expect to hear a "we're aware of the problem and are working on a fix". That would go MILES towards making me more patient and less irritated with Kodak. Telling me to wait for newer "products" or go buy a silex is a good way to loose customers.
So if you have any internal clout (or a message board), be sure to raise cain there for them to do the right thing.
jan
P.S. At the current time of writing, the silex website is not operational ("This site is temporarily unavailable. Please notify the System Administrator"). Way to go silex!

Printing from OS9 to USB printer on Extreme Base Station. Possible?

Similar Messages

Maybe you are looking for