Printing from Xcode: Line Numbers ?

How can I print source from Xcode with line numbers ?

Also not a direct solution but opening your files in Text Wrangler (free version of BBEdit) will allow you to add line numbers that will print out. If you use TextMate I THINK it behaves the same as Xcode and gutter displays line numbers but doesn't print them. TextMate is so extensible there is probably a way to make it print them as well but I'm not that familiar.
=Tod
PS I am speaking of Xcode < v3 here. I've only dabbled in v3 so I can't say what may have been added.

Similar Messages

How do I get my printer from off-line to on-line?

I installed my HP Photosmart C4380 on a network computer. It prints fine from that computer (which runs on XP). However, when I try to print from another computer, I cannot print because the computer is off-line. I did not have this problem when I had Windows XP. I was able to select "on-line." I now have Windows 7 on the computer I am having problems with.

What driver do you have installed on the Windows 7 machine? Do you have 32 bit or 64 bit Windows 7?
How is the XP computer connected to the printer - is it via USB or through the network?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print from on-line data

I just purchased a new wireless printer with a copy, fax scan option. I am able to print out the pages that I've saved while writing my new book, however, I'm not able to print data I've researched on-line. Why? I have a separate telephone line that was just installed by my phone company for my fax so I can send and receive faxes without the disturbance of my fax operation ringing in my ear during my phone calls. Hopefully, this will be a minor fix as I am not computer hardware savyy. Lost and confused, Gwen

Hey there ! Thank you for posting on the HP Forums. I would be more then happy to provide some suggestions that should get things going. What web browser are you trying to print from? Have you tried using a different web browser like Google Chrome or Firefox to print? The first thing I recommend is to uninstall the HP software. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP ENVY 7640 e-All-in-One Printer series Full Feature Software and Drivers Please post back and let me know how everything goes

Adobe XI remains open after printing from command line

I am using a program to collect, batch print and delete multiple PDF files.
The following command line is used to print the files, after which the file is deleted and next file is collected.
"C:\Program Files\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T /N FileName.pdf
I have now upgraded to Adobe XI, however Adobe remains open (and minimized) after sending the print job to the printer, resulting in my programing freezing while waiting to delete.
Is there a parameter to close Adobe after printing?
This is rather urgent as we have started rolling out the new Adobe XI.
OS = Windows7 Prof x64

Command line parameters are sparsely documented and are officially not supported. What is documented can be found here: http://partners.adobe.com/public/developer/en/acrobat/sdk/pdf/intro_to_sdk/DeveloperFAQ.pd f
I've not seen anything that shows what you want to do.

Setup a printer from command line issues

I have been trying to figure out why my arguments are not working. I was originally creating a .bat file with the PrinterUIEntry commands, but I was getting an "Invalid Argument" error. I switched to the cscript method and I am still not understanding
why it get errors on the driver install and printer install. The user of the created batch file will be non-IT users. I want to send a package with them with the unzipped printer drivers and install using the .inf file. I can't seem to get it
working properly and don't want to waste more time trying to figure out what is wrong. Any help would be appreciated. Thanks!
====First method attempted====
rundll32 printui.dll,PrintUIEntry /ia /c\\L638 /l "C:\Temp\NC Print Drivers\dellopd_A06\dellopd.inf"
----Error read "Invalid Arguments"
rundll32 printui.dll,PrintUIEntry /if /c\\L638 /f "C:\Temp\dellopd_A06\dellopd.inf" /b"Dell 5210n" /u /r "IP_192.168.10.157"
----Error read "Invalid Arguments"
=====Current method====
cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prnport.vbs -a -r IP_192.168.10.157 -h 192.168.10.157
----This creates the port just fine, no errors
cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prndrvr.vbs -a -i "C:\Temp\dellopd_A06\dellopd.inf" -h "C:\Temp\dellopd_A06"
----Error reads "Unable to add printer driver Error 0x80041008"
cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prnmngr.vbs -a -p "Dell 5210n" -r "192.168.10.157"
----Error reads "Unable to add printer Dell 5210n Error 0x80041008 invalid parameter
                          Operation PutInstance
                          Provider CIMWin32
                          Description
                          Win32 Error Code"

Hi,
Would you please try following commands?
Please don't add quotes on the inf file path: change the driver folder name NC Print Drivers as NCPrintDrivers.
rundll32 printui.dll PrintUIEntry /if /f C:\Temp\NCPrintDrivers\dellopd_A06\dellopd.inf /r "192.168.10.157"
Make sure to run the command as admin.
Let me know if it can work fine.
Kate Li
TechNet Community Support

Officejet 6500, How do I turn the printer from off line to on line?

I am stuck, cant get the printer to print because it say's it is offline. I know this cant be that difficult but I am not that smart with the computer stuff.

This 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print document may offer some help.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Printing line numbers in eclipse

I'm on Windows XP and I must print out the line numbers when I print out source code. However, I can't find how to do this in eclipse. Does anyone know?? I've tried everything.

never mind... I found it

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

I am having issues printing from ipad via airprint compatible canon 5230- noairprint found

I just purchased canon mg5230 AirPrint compatible printer. Attepting to print from Keynote and numbers. Message-no airprinters found. Printer does work via wireless laptop. It will print a photo only via Canon app.

Not sure if this is a typo, but the 5230 is not on the list of airprint printers, but the 5320 is.
Here is the list.
http://support.apple.com/kb/ht4356
If you have the 5320, the from the printer control panel, see if you can update the frimware on the printer. If you have recently bought it, it was not likely shipped with the current software.

How to print line numbers in NWDS for Java?

Hi everyone,
does someone know how to print out program code with line numbers from the Netweaver Developer Studio for Java? This is inevitable for code reviews.
In Eclipse 3.4 this issue is solved. Is there possibly such a patch for NWDS as well?
Thanks,
Maria

Hi Pascal,
thanks for the quick reply. The setting you mention displays line numbers on the screen alright, but printing out does not work.
We use: SAP NetWeaver Developer Studio for SAP NetWeaver 7.1 SP06 PAT0000, Build id: 200807051938.
I guess it just does not work, because it was fixed only for Eclipse 3.4, and the above NWDS version bases on Eclipse 3.3.
What do you recommend for code inspections - copy/paste into PSPad or do you know a more comfortable practice?
Greetings
Maria

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Taking download into excel from ALV Grid - header is printing in two lines

Hi All,
I have a scenario where I am taking the download from ALV grid to an excel sheet. Now the header of the ALV (column names) is appearing in two lines in the downloaded excel sheet while items (records of the ALV table) are getting displayed in a single line.
This download is taken from the standard download to local file (spreadsheet) button provided by SAP for ALVs.
I am using function module "Reuse_alv_grid_display" for the purpose.
Can somebody provide an idea how I can avoid the header printing in two lines and keep the length as it is.
Thanks in Advance,
Chandan

Hi..
1. Pass header name in internal table appned first line.
2. after that pass u r data .
3. Use FM. WS_DOWNLOAD
Salil ......
Edited by: salil chavan on Nov 26, 2008 11:07 AM

HP4500 printer went off line. I can print the test page but nothing from the IMAS

Network down, re-set - now can't get the printer to function. HP4500 wireless. Was able to print a test page but when I try to print from the computer I get the "printer off-line" message. I don't know how to fix this.

Try removing the printer from the printer list, then re-add it.
Are you sure you have the latest drivers?

How to print continue Line Numbers in PLD Differen repetitve areas.

Hi,
We need to print line numbers continues in different Repetitive areas.
Ex. Repetitve Area 0 we have item Discriptions
      Repetitve Area Footer1 we created sotvalue() here it will display servicetaxes
      Repetitve Area Footer1 we created one text roundoff
we need output like
Ex:1. Dell        **Repetitve Area 0****
      2.Mouse     **Repetitve Area 0****
      3.Laptop      **Repetitve Area 0****
      4.servicetax   **Repetitve Area Footer1****
      5.cess             **Repetitve Area Footer1****
      6.Hcess             **Repetitve Area Footer1****
      7.Roundoff           **Repetitve Area Footer1****    as a text field
for above all we need to print Line numbers sequence how we can print sequence numbers for differen areas.if i assigned Linenum( ) in Repetitve Area 0 it will display one for Repetitve Area 0 only.and i applied Gouplinenum also it's not printing. please guide me how to print this.
regds,
sampath kumar devunuri.

Hi,clint pow.
Please we did what you said but we are not retreiving data.please tell me how we can get serieal numbers for different repetitve areas.
regds,
sampath.

Missing Left line on all the invoices when printing from APPS

Hi Guys,
I need help here as i am learning XML. I customized one of my invoices RTF template and looks fine. When i generate the Invoice output from Apps through concurrent manager I am getting output with missing left line. When i tried to print from View Output its printing fine.
Is anyone came across this? Please let me know if anybody has solution.
Thanks in Advance,
Kumar

When you hit Print, is the dialog that comes up really small? If so, there's a triangle you can hit to the right of the Printer menu in the dialog that'll expand it to full size. This was something Apple added in 10.5 to simplify printing, but it's caused a lot of confusion.
If that's not it, are any of the menu items in the middle menu (the one that starts out saying "Layout") crossed out? If so, you're probably running in 64 bit mode and the printer driver probably does not work in 64 bit. If you're using the latest driver, then try launching Lightroom in 32 bit mode (in the Finder, do Get Info on the application and check Open in 32 Bit Mode).
If neither of those work, let me know.
-kevin
Adobe Lightroom Engineering

Printing from Xcode: Line Numbers ?

Similar Messages

Maybe you are looking for