Printing General Troubleshooting Guide

Hi everyone
I wanted to share some good links for general help for the spooler subsystem.
Troubleshooting Windows Server 2012 Printing
Print Spooler Crash Troubleshooting Steps
SetPrint.ps1: A Powershell Script to Set Some Default Settings on Print Queues
Some general's information:
Windows 8 / Windows Server 2012: What’s new with Printing in Windows 8?
In the hope it help. Feel free to add any other links by replying to this post.
Thanks
nb, any moderator can stick that post ? :)
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Hi SuperMario1,
thanks for the update. however, it seems that your sulution is just a way of bypassing the problem, and not a fix. this kind of sulutions are problematic and can cause other problems.
i don't think it is acceptable that the speakers on HP's laptops would stop functioning because of a windows update. what guaranties that tomorrow, next month, or six months from now something else won't stop working due to another windows update? A functioning speakers is very basic and essential. Is someone working on fixing that?
i'm very much unpleased with the way this issue is being managed by your people. beside not offering a legit sulution, it took you huys a long time to figure out that infect there is a broad problem here. or maybe it didn't, but for some reasone you it seems ok to not update your customers about this. so many users have reported in the past few days the exact same problem, and have recieved from the support team the same generic and not helpfull reasponse. why is this?

Similar Messages

Troubleshooting Guide

Troubleshooting guides have been added to each of the forum categories and you can access them by clicking the links below.
General Tips
FrameMaker Integration
RoboHelp for Word
WinHelp
FlashHelp
WebHelp
Printed Documentation
HTML Help (CHMs)
Source Control
AIRHelp
RoboEngine / RoboHelp Server
RoboHelp HTML
Other Single Source Layouts
They are under construction so they may not have much information in them yet.
Meantime there is lots of information here in the forum, you just need to use Search.
Also take a look on my site and Rick Stone's.
http://www.grainge.org
http://www.robowizard.com

Hi SuperMario1,
thanks for the update. however, it seems that your sulution is just a way of bypassing the problem, and not a fix. this kind of sulutions are problematic and can cause other problems.
i don't think it is acceptable that the speakers on HP's laptops would stop functioning because of a windows update. what guaranties that tomorrow, next month, or six months from now something else won't stop working due to another windows update? A functioning speakers is very basic and essential. Is someone working on fixing that?
i'm very much unpleased with the way this issue is being managed by your people. beside not offering a legit sulution, it took you huys a long time to figure out that infect there is a broad problem here. or maybe it didn't, but for some reasone you it seems ok to not update your customers about this. so many users have reported in the past few days the exact same problem, and have recieved from the support team the same generic and not helpfull reasponse. why is this?

Troubleshooting Guide To Boot Camp 2.1

Troubleshooting Guide To Boot Camp 2.1
With a Mac Book Pro Os X Leopard and Windows XP Pro. I am providing this guide because I spent literally days fixing various problems most related to bad drivers. If I can save you the Nightmare I had it will be worth my time to write this guide for you!
Install Windows XP on FAT32
While using Mac if you ONLY want to be able to read XP files (NTFS or FAT32) then skip this section because OS X Leopard is able to correctly detect NTFS and FAT32 disks in READ ONLY mode.
However if you want to be able to read & write XP files (NTFS or FAT32) in Mac then you would install a program like Paragon NTFS or NTFS-3G. However once you do this you will experience this Problem:
Windows partition missing from Mac 'startup disk' menu when using NTFS-3G or Paragon NTFS in Mac (Bootcamp 2.1 fails to fails to show windows disk in startup menu after installing NTFS-3G or Paragon NTFS)
It is unclear who is to blame for this bug. Both Paragon and NTFS-3G DO NOT KNOW HOW TO FIX the problem so the finger is pointed at this being an Apple Boot Camp bug! Don't hold your breath for a bug fix from Apple because I saw people have been having this problem for several years. It would be nice if the Apple cared a bit more about the Windows people they are trying to win over but anyway we are greatful for Boot Camp (even if it is as buggy as ****).
First my personal experience, I had it working perfectly before and after loading NTFS-3G onto my Macbook. I also had it working perfectly with Paragon NTFS. Then after a few months I reinstalled XP. Suddenly it no longer worked! Very fustrating when you KNOW it can work perfectly. It took me several days to figure out that this due to the fact that I had first installed XP and formated as FAT32 but the second time had installed XP and formated as NTFS!!
ONLY KNOWN Solution for this problem :
Format XP using FAT32. Apple understands FAT32 and everything will work as normal!
Do not format using NTFS as Apple does not understand it and XP will be missing from the 'startup disk' menu!
NTFS users can use this work around solution :
Install Paragon NTFS and use Paragon to set your boot partition and then reboot.
The least desirable solution :
Hold the ALT key down while booting and choose XP.
Install Boot Camp version 2.1
Using the the disc that comes with your Apple Mac Book Pro.
After Installation update the following drivers to these versions or newer :
Broadcom 802.11 Wireless (5.10.91.8) (4321AG) (*)
Realtek HD Audio R2.27 (5.10.0.5874) (2009-06-16)
NVIDIA GeForce 8600M GT v185.85 (07.05.2009) (v6.14.11.8585)
Note (*)
Broadcom 802.11 Wireless drivers must be force installed to 4321AG. You can do this after installation by using the device manager and updating the driver to 4321AG. These drivers are 'borrowed' from another Broadcom 802.11 Wireless device since an update for the BCM 4328 drivers are not available from Apple or Broadcom.
Unresolved Issue
Back lighting of keyboard is not working in XP. Apple Bug?
Problems Fixed By Doing These Updates
Bootcamp KbdMgr.exe Latency Problems Slowing Your XP
I could not fix this problem but found an easy work around.
First check if your latency is being affected by the 'KbdMgr.exe' driver. Use 'DPC Latency Checker'. If the latency is green then you are OK! Skip Adead. If your latency is red then kill the 'KbdMgr.exe' in the task manager and check the latency. If it drops then this work around applies to you.
Open the Boot Camp directory in your Program Files directory. The real 'KbdMgr.exe' is renamed to something else like 'Boot Camp.exe' so that you can use it to boot back to Mac when you want to. Create a shortcut to the new name from from your desktop.
Then create an empty text file and give it the name 'KbdMgr.exe'. This will allow your PC to boot normally and run normally but will prevent Boot Camp loading automatically.
Wireless Problems
The Broadcom 802.11 Wireless drivers for the (BCM 4328) are unstable and often loose connection or freeze or stop working for no reason. The driver that causes this problem is version 4.170.25.12 (20/09/2007) BCMWL5.SYS
Sound Problems
The Broadcom 802.11 Wireless drivers (BCM 4328) drivers cause sound problems. Music or sound stutters or slows on playback. The driver that causes this problem is version 4.170.25.12 (20/09/2007) BCMWL5.SYS.
Apple Touch Pad Problems
The drivers supplied on the Boot Camp disc from Apple work but do not install correctly for some unknown reason but the drivers do work once you get them installed. The driver install files are :
AppleMultiTouchTrackPad.exe
AppleTrackpad.exe
Your Apple Touch Pad Drivers are working when Device Manager shows :
Apple MultiTouch
Apple Multitouch Mouse
And you can do a right click by holding two fingers on the touch pad and doing a click
You can scroll up and down using two fingers. Adjust the wheel scrolling speed to one line at a time under mouse properties in the control panel.
To install the drivers correctly use the Device Manager and look under Human Interface Devices. You should find two Apple 'Touchpad' drivers listed with a (Yellow !) change these drivers to use the 'USB Human Interface Device' driver. Then install both 'Apple MultiTouch TrackPad' and 'Apple Trackpad'. This should automatically update the 'USB Human Interface Devices' to the correct working Apple drivers. This worked for me. However if you are still having problems you can try the General Driver Installation Tips.
General Driver Installation Tips
Uninstall all devices drivers that are failing and reboot.
Make sure all non-Apple drivers are working properly. If not try and fix them first. I had a Logitech Mouse driver that was not working and suddenly when I fixed that at least half my Apple drivers started working. There was probably a resource conflict or some other relationship between the Logitech driver and the Apple Drivers.
If any driver is giving errors delete the physical driver file and reinstall! This is very useful when nothing you seem to do works. Sometimes you must physically delete the old driver file so that windows will correctly install the new one. I don't know the technical reasons for this only I found that this worked for me when I had to replace a Logitech Mouse driver after hours of fustration.
If you are busy in Device Manager and working with 'Human Interface Devices' and accidentally uninstall one of these drivers which are related to your mouse driver your mouse will stop working. Don't reboot, just unplug your mouse and plug it in again and Windows will autodetect a new mouse driver for you.
If you have been messing around and installing many drivers and your drivers still fail then try roll back the drivers until you can't anymore and then try one of the above methods again.
--------------------------------------------------------------------

It does work, but I think it is hard based on scant details as to why or what is preventing BC 2.1 from updating. I will say that BC 2.1 came out last spring and there were lots of people having trouble and threads to prove it (and long ones).
You should have Apple Software Update Control Panel which had to update itself to 2.1.1 in order to receive future updates that way (catch 22 if you can't, seems to be only to prevent older owners using BootCamp 1.4 Beta from taking advantage of BootCamp 2.x).
Mac OS X DVD now being sold has 10.5.4 and BootCamp 2.1. I assume your DVD of Leopard is older?
Trouble reports:
http://discussions.apple.com/thread.jspa?threadID=1736468&tstart=125
(most problems seemed to be related to XP3, but not all)
http://discussions.apple.com/thread.jspa?threadID=1657888&tstart=125
Do you have Vista SP1?
http://www.techspot.com/blog/204/why-i-wouldnt-buy-the-new-macbook-and-probably- you-shouldnt-either/
BSOD using iPhone or iPod?
http://support.apple.com/kb/TS1502
Wireless:
http://www.ezlan.net/wireless.html
http://www.ezlan.net/Wireless_Config.html
Vista on MBP (ComputerWorld)
http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleI d=9003111
MacBook Air and Vista:
http://www.xbitlabs.com/articles/mobile/display/apple-macbook-air_7.html
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows Vista
http://support.microsoft.com/kb/927392/
Vista Crash Recovery Strategy:
http://www.informationweek.com/news/windows/showArticle.jhtml;?articleID=2000003 29
And if you think PCs don't have driver issues or problems.... think again, but usually some dedicated sleuthing and research it is possible to fix.

Troubleshooting Guide: Audio does not Work after a Certain Period of Time

Hello everyone, Thanks for choosing the HP Forums! If your sound recently stopped working on Windows 8.x or Windows Server 2012, and you suspect a Windows Update is involved, then look no further! This is the troubleshooting guide that will explain how to resolve the issue! Explanation: Currently, there is a Windows update that may be causing the sound on your computer to stop working. The update is KB2962407, and it is now an “Important” update. That means that it will be installed by Windows Update unless you hide it. This thread also covers generic sound troubleshooting that can resolve "no sound" issues. Before tackling the update itself, since a Windows update may not be the culprit, there is some troubleshooting that can be done. A Round of Troubleshooting: 1. Running the Audio Troubleshooting in Windows 8 can resolve the issue. It does contain the ability to eliminate any setting that affects sound. Here are some steps on how to run this troubleshooter: a) Hold down the “Windows” and “R” key and then type “troubleshooting” and hit Enter.b) A window will open. On the left, click “View All”, then “Playing Audio”.c) Click “Advanced” and run it as Administrator. Then click “Next” to complete the process. 2. Try creating a new user account. The changes forced by the update may only affect one user. This HP document shows you how to create a new user under the “Creating a new account in Windows 8” section: Managing User Accounts and Logins (Windows 8) 3. Try a pair of headphones or external speakers. It will rule out where the issue lies if sound does not work through a second or third output device. 4. Another solution is to uninstall the driver manually then force it to be installed again:a) Open Device Manager, and go to the “Sound, video and game controller” section.b) Right-click on your audio driver and select “uninstall”.c) Restart the computer. This will force the hardware to write a new driver upon startup. 5. Finally, make sure that the remaining steps that you haven't tried from this document are attempted: No Sound from Speakers (Windows 8) New Inclusions: Disabling and enabling the sound driver has been tested with successful results enough for me to post here. These are the instructions to do this: a) Open Device Manager, and go to the “Sound, video and game controller” section.b) Right-click on your audio driver and select “disable”.c) Wait a minute, then right-click on it and select "enable" Also, A System Restore is also a valid troubleshooting step. This will return the computer to a point before the update and/or external source of the issue occurred. Here is a document on how to perform a System Restore: System Restore If you want something stronger, a Windows Refresh completely refreshes Windows 8, without affecting files: Refresh Your PC to Resolve Problems (Windows 8) Also, here is a Windows sound troubleshooting tutorial. Just out of curiosity, I re-created the issue on a Windows 8 computer and went through this tutorial. It was able to resolve the issue: No sound in Windows *Everything in italics is currently un-tested, but will be tested as soon as possible. I believe these steps will help: In the search bar, type "services.msc" and hit Enter. Hold down the "Windows" key and "R" key. Type "services.msc" and hit Enter. Look for the following services: - Audio Service- Windows Audio- Windows Audio Endpoint Builder I want you to right-click each of those services, and select "Stop". When they are all stopped, right-click on each one again, and select "Start". As well, make sure each service's status is "Started" and their startup type is "Automatic". Troubleshooting the Update: At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407. Please note that the following troubleshooting is ONLY a workaround, for now, and only should be done if the computer has installed this update. First, you can try the Hotfix in this Microsoft document, specifically to address KB2962407: Windows RT, Windows 8, and Windows Server 2012 update rollup: June 2014 If that doesn't help, then uninstalling the Windows Update, and then hiding it, is the only method of eliminating the issue if it caused by this update. Here is the procedure for uninstalling the update: 1. Go into Control Panel, then click on “Programs and Features”.2. Click on “View Installed Updates”. Look for the update with the ID number KB2962407.3. Right-click on the update and select “Uninstall”. Restart the computer. Next, here is the procedure for hiding the update: 1. Go into Control Panel, then click on “Windows Updates”.2. Click on “Check for Updates”. When the process is completed, is should find important update(s) available. Clicking on the message will open a window where the important update(s) is.3. Right-click on the KB2962407 update and select “Hide Update”. This will prevent the update from being installed next time Windows Updates are being installed. Conclusion:
At the end of this guide, you will have sound working again (assuming that the cause was the Windows Update, or at least software-based). Please let me know if you have any other questions or concerns. Thanks!
Mario

Hello everyone Thank you so much for making use of my thread, dedicated to resolve the issue. I appreciate all the feedback For those who are still experiencing issues, please reply to this post with the following information, and I can continue to assist: 1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number 2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system. (Make sure to include whether it's 32 or 64 bit.) 3. Does this occur on certain programs, or all programs? 4. Have you installed any new software or drivers on this computer, before the issue appeared? 5. What steps have been attempted from my first post on this thread, and what were the results? Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore Thanks again for all the continued support! Mario

I have updated to windows 8.1 from windows 8. My ipod nano (6th gen) is no longer identified properly in itunes. I have tried all steps in the troubleshooting guide but it has not resolved the issue. What can I do?

My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Adobe Illustrator CS6 Error 16 continues even after following troubleshooting guide and adding permissions.

Error 16 continues. I have followed the troubleshooting guide to the letter for this error and I continue to receive the error 16 when trying to open Illustrator. Is there a work around for this? Any suggestions would be appreciated. I would rather not keep uninstalling and re-installing software.

Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039 https://forums.adobe.com/thread/1500609
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How do I print General Ledger Balances for a particular day

HI Sap Gurus,
I want to print general ledger balances as of a particular day/date. I did use FBL3n, but it gives me with line items,
I want just the totals. Do you know of any other report I can use.
Would really appreciate the help
Thanks so much will surely avoid points
Pearina

Hi Ms. Pearina
The only way you can get the totals for one date is using FBL3n or the S_ALR reports & the only way you can print only the total instead of every line item is by running FBL3n & clicking on the ' * * ' at the bottom line that shows the total of the GL account. Then you will be able to eliminate all the line items from your print out. You can save this as a layout & call that layout everytime you only want to see the totals. You can also default the layout if you want.
Any further questions, please post your follow up...
If useful, award points please...
Thanks
Morgan

SAP NetWeaver BPM Troubleshooting Guide

Hi all,
I am not sure if you happen to see that the description of this forum had changed.
Thus I wanted to point your attention to a a page we recently added to it: The so called '[SAP NetWeaver BPM Troubleshooting Guide|http://wiki.sdn.sap.com/wiki/display/BPMT]' tackles typical problems you may encounter when start using SAP NetWeaver Business Process Management (BPM).
We came up with a step-by-step based guide similar to the one the colleagues from the Java Server Team created. It covers aspects like modeling, running and monitoring your SAP NetWeaver BPM processes.
For sure this guide is not complete. We added an inital set to it and would love to see it evolving together with your help. So feedback from your side is always appreciated. Furthermore it clearly cannot cover all aspects the [official documentation|https://help.sap.com/nwce] describes and definitely does not aim to compete with it.
So: Update your bookmarks and give it a try:
[SAP NetWeaver BPM Troubleshooting Guide|http://wiki.sdn.sap.com/wiki/display/BPMT]
Best regards,
Martin
Edited by: Martin Moeller on Jan 25, 2012 10:17 AM (Link updates)

Excellent proposal, thanks.
Feel free to use this thread for comments.
Best regards,
Martin

ABAP Mapbox Troubleshooting Guide

currently, I do have the situation, that no new activities are transferred to groupware (lotus). I am using ABAP Mapbox in CRM Release 5.0. Update messages on older activities do work!
regarding the troubleshooting guide by mr. stephenson in this forum, I do have the following questions:
1.) How can I figure out, whether a xml-message (iCal or vCard) has been generated by the Mapbox. I do have the BDoc-Id (out of smw01) but i dont find entries in CRMD_MBA_GUISTOR. This table contains 1,2 million entries which makes it hard to find the specific message, since that table doesnot contain a timestamp.
I turned on Trace in ISPCFG and I see in GWA_01 out trace, that my message (with tRFC-ID) seems to be processed, but I dont know, how? Meaning, I dont get an error or a info, if there was nothing to do,...
2.) How can I restart the "Abap Mapbox" or bring it to an consistent starting state?
3.) what is the relation between the tables? Any documentation available
CRMD_MBA_GUISTOR.
CRMD_MBA_MSGSTOR.
CMWD_MBF_PAIR.

current investigation results:
1.) since the bdic-id generation seems to be sequential, the table CRMD_MBA_GUISTOR can be sorted by mbkey. if your message doesn't apperar in the end, no message is generated. Attention: don't how update behaves, so make sure you cteate new activities.
as mentioned before, the ISP trace is less usefull
2.) and 3.) still open
ABAP Mapbox logging
It might be usefull, to turn on "logging". This can be done in table ISPCFG:
a.) Find the row CRM_MAPBOX and set PARVAL2=X.
b.) run your test
c.) run transaction SLG1, you might filter on your user.
The output of logging indicates basic processing info. For my issue it didn't help, maybe for yours. I figured out, that a strange/ wrong "Ansprechpartner" Relation was missing on the activity. Therefore no email could be found and therefore no message has been generated.

Google maps keeps giving "Still loading... Slow? Use the troubleshooting guide or basic HTML" message and won't load maps

I go to Google Maps and try to enter address in search bar.
Message pops up: "Still loading... Slow? Use the troubleshooting guide or basic HTML"
Nothing ever comes up -- map does not load.
If I append "q?=us" to url (below) (without quotes), it works.

&q=us does not work.
Starting firefox in safe mode does not work
Map loads but entire page except main menu is non interactive.
"Still loading... Slow? Use the troubleshooting guide or basic HTML"
It comes up on google.com.au but not google.com
It happened after they added the new privacy popup with with MapGL also being added.
Disabling all cookies with Web Developer or browsing in private mode works but when settings are put back to normal it stops working.
I deleted all cookies and cleared cache but that did not help. Strange that clearing cookies did not solve the problem because disabling cookies works.
I tested with another browser and it works... but I want firefox forever.

Troubleshooting Guide for 1.4.2 ???

I hope this is a good place for this question.
I have a troubleshooting guide for Java 5 (jdk50_ts_guide.pdf) that has a lot of information in it.
Is there such a guide for 1.4.2?
To focus the request, I may soon be looking at a problem at a NASA site where JVM crashes are curring frequently and we are having trouble interpreting what the Crash File is telling us. I noticed that the 5.0 version addresses the format and content of 5.0 JVM crash files and has at least SOME information in it. I was wondering about a guide like this that discusses the 1.4.2 JVM.
Thanks, in advance, for any help that anyone might be able to provide.
Bob

We are working on making it available. It may still be a few days before
it shows up.
Thanks,
/Staffan
Peter wrote:
Where can the JRA be downloaded for 1.4.2?

Troubleshooting Guide (072-0274)

Looking for a Apple TechStep Troubleshooting Guide (072-0274) or the Troubleshooting Guide for the ROM vol 1, ver 1.1.1, Anybody have one?

Hi SuperMario1,
thanks for the update. however, it seems that your sulution is just a way of bypassing the problem, and not a fix. this kind of sulutions are problematic and can cause other problems.
i don't think it is acceptable that the speakers on HP's laptops would stop functioning because of a windows update. what guaranties that tomorrow, next month, or six months from now something else won't stop working due to another windows update? A functioning speakers is very basic and essential. Is someone working on fixing that?
i'm very much unpleased with the way this issue is being managed by your people. beside not offering a legit sulution, it took you huys a long time to figure out that infect there is a broad problem here. or maybe it didn't, but for some reasone you it seems ok to not update your customers about this. so many users have reported in the past few days the exact same problem, and have recieved from the support team the same generic and not helpfull reasponse. why is this?

Troubleshooting Guide - SAP XI 3.0/2.0

Dear all!
Since yesterday there's a new Troubleshooting Guide for XI available. Have a look at http://service.sap.com/instguidesnw04 -> Operations -> SAP XI -> Troubleshooting Guide - SAP XI 3.0/2.0.
Regards,
Klaus

Hi Gabriel,
SAP XI 3.0 enhances the functional range of SAP XI 2.0 by a lot of new features. The most important new features are:
Cross-component Business Process Management
a.You can model executable integration processes and
store them in the Integration Repository.
b. You can execute integration processes on a Business
Process Engine that is part of the SAP XI runtime
environment.
B2B Integration
a. Collaboration partner data can be maintained in the
Integration Directory.
b. A Partner Connectivity Kit (PCK) allows the
integration of business partners not using SAP XI or
other integration solution.
Industry standard support
a. RosettaNet communication with business partners is
supported through a RosettaNet adapter.
b. The RosettaNet adapter is part of an overall package
to enable SAP solutions to participate in RosettaNet
integration.
Adapter Framework and certification of adapters
a. A JCA-based adapter framework allows the integration
of adapters provided by SAP as well as by partners.
b. The integration of partner adapters is certifiable.
Simplified Configuration by Using Integration Scenarios as Templates
a. You can configure integration scenarios from the
Integration Repository and semi-automatically generate
all relevant configuration objects.
Enhanced Integration Builder functions
a. You can define data-dependent user authorizations
b. You can define an infinite number of change lists for
each user and exchange objects between different
change lists of different users.
Check these links
Re: XI 3.0 vs 2.0
is there any diff between sap xi 2.0 and 3.0?
Documentation of XI2.0 & XI3.0
http://help.sap.com/saphelp_xi20sr1/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Cheers...
Vasu
<b>** REward POints if found useful **</b>

B1ic Troubleshooting Guide

Hi everyone
A new blog has been released with a B1ic troubleshooting Guide.
/people/lisa.mulchinock/blog/2010/08/03/troubleshooting-guide-for-b1ic
You can refer to this with any issues you incur during the B1ic installation, cockpit activation etc.
I will continue to update this.
Hope it helps
Cheers,
Lisa

Hi Lisa,
could you please correct the troubleshooting guide in 2.7 Solution 2?
The server address contains a blank when copying it from the PDF. This took me several hours now, I didn't even think of using a wrong server address from the troubleshooting guide.
-> wrong:
http://<server_name>:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.v platform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc
-> correct:
http://<server_name>:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc
Thank you
Sebastian

WAAS Troubleshooting Guide now available

I'd like to announce that the new WAAS Troubleshooting Guide on Cisco DocWiki is now available at this URL:
http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later
We hope that you find this new document useful to you and, in the spirit of collaboration, we'd like to encourage WAAS users to contribute additional information and troubleshooting tips to this wiki-based document.

thank you for the link.
is it for the 9iAS rel 2 or 10g, though.
do you also know the link for a similar document for 9ias rel 2?

Printing General Troubleshooting Guide

Similar Messages

Maybe you are looking for