Printing help, colour changes when i print files for second time

Hi, iv designed a thank you card that i want to print off multiple times, iv saved it, happy with it, did a test print and it looked fine, i then went to print off a second copy and the colour had changed to a much lighter tone, so i assumed the ink was running low and changed the ink, went to print it again, and its still the same pale colour, any help anyone, thanks in advance

Hi, thanks. Do you mean Save As - Photoshop PDF, or... how are you referring to doing that?
(Thank you for this! I had taken to making screenshots for pete's sake, though this change happened suddenly, so ... I have no idea why printing to PDF suddenly didn't work and it seems it should be "repairable".)

Similar Messages

Error while importing zip file for second time to B2B through ant script

[echo] args=import
importstatus:
[echo] Commandline arguments 1: [import]
[echo] Import with overwrite=true
[echo] B2BCommandLineUtility: importRepository: Error messages:
[echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
019445112136.xml from metadata repository
[echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
45112136.xml because it is not in the metadata repository
[echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
136.xml" and version 16 does not exist in the repository.
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo]
Can anybody plz help???
Thanks in Advance!!!

Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help...

Error -1073807346 will get away when i run VI for second time

This is the weird thing
i open the vi for the first time and run it and it will put out the error :
Error -1073807346 occurred at VISA Open in Prompt for com port.vi
Possible reason(s):
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
i run the vi for the second time and the error goes away.. and everything works...
i dont know whats wrong, have you had this problem also?
Attachments:
serial.png ‏31 KB
serial.png ‏31 KB

You know that almost threw me untill I re-read the vi name!
Dude, that's not how you write a "Prompt User" routine! What is happening is that you read the VISA In Terminal run that value through the for loop (At warp speed burning a cpu core) while the user fiddles with the VISA in terminal. BUT, nothing changes the value on the wire! so you pass the "Old" value to the VISA Open.
I've been meaning to add Prompt(VISA).vi to my reuse for a while anyhow. Thanks for the excuse.
Jeff

Need help to change id name and password for second hand ipad payyed good money for it bought it at swapmeet cant find the old owner very fusterating please help

please help me set my password and id name for my ipad its not fair i bought it from a person for a high price and apple wont help you out. but you can reset anyother computer by your self with no problem

I am afraid you cannot activate the iPad without the Apple ID and Password of previous owner.

Slight Color and Quality Shift when viewing RAW files for first time in Library Module.

Hello,
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite.   I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW.   At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR.   I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
I guess what I need to know is a few things and I hope someone can educate this newbie!
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
Thank you for any guidenace you can offer. Of course if you need additional information or clarification please let me know.
Scott

That sort of describes it and may be exactly what is happening. I have a shoot tonight and will pay closer attention to the process and behavior when I import.
It is the full image that I see the shift on though. Its not that the thumbnail and the full size image look different. It the full size image looking one way and then shifting in front of my eyes.
What is frustrating is that I typically find that the image before the shift is better than what appears after the shift, so I find myself always chasing to get back to where it was and because its gone I'm chasing an invisible ideal, so to speak.   Ahhh...isnt that the life of a photographer though!
It seems like its the last step in the render process -- if I could just figure out what it is and stop it I could finally figure out if I really care or not. Its just so quick its tough to tell if indeed the first appearance is better.
I'll feedback some more information when I get a better handle on this.
Thanks for the reference.

Pages fonts changes when I print

I have a table in pages that the font style appears correct on screen but it changes when I print or export to pdf
The font is avenir condensed regular. A few of the lines in the table drop a portion of the text when I print or export as pdf. How can I get this to print and export as it is viewed? Why is it changing?

My graphics studio is running Adobe CC, so we are using the latest versions of Photoshop, InDesign, Illustrator and After Effects.
The files in question were inherited from a client. We need to maintain their product sell sheets that they created. Because they are working with Pages and Numbers we will get more files this way. Its a problem to receive files that look one way but print another.
My question remains. Is there a way to edit and print pages documents in Pages 5.2 from documents that were created in 5.5. This is only an
incremental change. The files open and display correctly. They even look right after editing. The disconnect is when we print them or create a PDF.
I'm trying to avoid migrating my entire studio to Yosemite just so we can run Pages 5.5. If I migrate one mac i'll have to move the entire studio.

Mac book pro stopped printing in colour and is now printing a grainy image instead. How to remedy this situation

My Mac Book Pro (Retina) was printing in colour on a shared printer at the office. It is now printing in Black and White with a very grainy blurred image. Will the ColorSync Utility be of any help? The colour option isn't in the print prompt when printing from iphotos. Any advice would be appreciated. thank you

Hello Courious7,
It sounds like you are unable to print in color but it used to work without issue. Assuming no changes have been made to the printer by the IT department, these troubleshooting steps should lead you to a resolution:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Regards,
Sterling

Why will my HP6510 not print to photo tray when I print directly from my computer?

Why will my HP6510 not print to photo tray when I print directly from my computer?
I am able to print to the photo tray when I print from a memory card, inserted directly into the printer. However, when I try to print a picture saved directly to my laptop through my wireless connection, the picture prints from the main tray. If I take the paper out of the main tray, I get the out of paper message. When I first bought the printer, I had no problems with this issue. The printer is about 2-3 years old. I have gone into the HP software on my laptop and set the preferences for photo tray, along with the size I wanted and the photo paper I was using. By the way, it is HP photo paper. I have also done the same on the print screen on my laptop. In addition, I have gone into preferences on the printer itself and chosen "Prompt for photo tray." I have also uninstalled and reinstalled the HP software on my laptop. I successfully printed the "practice picture" during the reinstalling process. None of this has solved the problem.
I have no problem printing a document from my laptop wirelessly to the printer.

Hi mountainnana,
Thank you for your response, sorry the guide was not what you were looking for.
Here are some other suggestions:
Open the HP Solution Center (icon is normally on the desktop.) Click on Set Preferences, Click on the Paper/Quality tab, for the Source choose Tray 2, choose the right paper size and media type. Click Apply, and then OK. Then try printing your photo again.
If that does not work there could be a driver/software conflict happening. If that is the case please try our HP Print and Scan Doctor.
Otherwise, proceed with a uninstall and reinstall of your printer software using the HP Printer Install Wizard for Windows.
Hope this solves your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

Portables that will not Power on.
Try another power outlet.
http://support.apple.com/kb/TS1365
Go step by step.
Note: Steps 5 and 6
Best.

Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

Itunes application error when attempting to open for first time. HELP

Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

HT1918 Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD an

Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD and itunes will not let me? The music is in my music file but will not let me burn them ! really I tried over and over, now Im just frustrated !
Please find the original's purchased, my name and email have not changed. Thanks for your time and consideration.
Jeannie
7024503288
[email protected]

Fixed. /Users/x/Library/Application Support/SIMBL/Plugins/AirKeysInputManager.bundle got corrupted by a badly installed safari extension. Deleting this, then reinstalling adobe air did the trick. I wasn't thorough enough on my first try, it was tricky to find everything associated. I had to look for files in the console log then search for them. Spotlight was missing some deep files, EasyFind worked better for me.

URLLoader failing to read in local file a second time

I am running into an error when I'm trying to read in a file a second time into my flash application. It's throwing the following error:
[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032"]
I don't know if it makes a difference, but I'm running flash from within Director 11.5.
I'm reading in the following format: mLoader.dataFormat = URLLoaderDataFormat.TEXT;
I have no trouble reading multiple different files, just reading in the same one (which may or may not have changed) twice.
Has anybody run into this before?

Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

Printing help, colour changes when i print files for second time

Similar Messages

Maybe you are looking for