Printing in a 44inch roll

Hi I am using photoshop to stack 2 frames 12x16 in a 44 inch roll

It would be helpful to know your platform (Macintosh or Windows?), what version of the OS and most importantly the exact make and model number of your printer.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

Looking for a Laser Printer which takes Paper Roll instead of seperate(A4 size) papers

we are looking for a Laser Printer which takes Paper Roll instead of seperate(A4 size) papers

I don't know of any laser printers that take a roll instead of sheets. There are some small designjets that might have a roll feed accessory but they are inkjet printers and designed for graphics applications.
insert signature here

Printing pano's on roll paper

I am having a problem with printing from Lightroom with roll paper. What I just tried to do was print a pano with a portrait size of 26 X 8 inches. I went through all that I thought was correct including checking the template browser for maximum size, clicking roll paper in page layout as well as user defined as paper size and when in the printing window of Lightroom I made the cell size 26 X 8 (inches) but when I clicked PRINT the warning message came on indicating that the cell size had to be 8 X 14. I could do nothing to let it maintain the cell size that I had put in of 26 X 8. What am I missing here?
[email protected]

What was the page size of the paper set to in Page Setup? The print driver needs to report to Lightroom what the maximum size it can accept-if it pins at 14" then you didn't have the length needed for the cell size-which LR told you.

I upgraded to Firefox 9 beta and now it cannot locate either printer. How can I print or can I roll back to Firefox 8?

I have two printers installed and they work fine with all programs except Firefox. I recently upgraded to version 9 beta. I either need to be able to print from Firefox or to roll my version back to 8.

Get Firefox 8 from here and you can install it on top of current version, just download and run
* getfirefox.com

Photoshop CS3 printing on R2400 using Roll image over 44 inches

Hi,
I have an image that is 100 inches wide. and 10 inches high. It is a panorama made up of 9 shots.
According to Epson (I've been dealing the their support center) the Printer can actually print up to 129 inches wide using the Roll feeder and Banner mode with the User Defined size options.
However, it keeps stopping at 44 inches no matter what settings I use.
According to Epson, Photoshop is restricted to a MAX resolution of 300,000 pixels (3 megapixels???) for printing purposes.
I find this hard to believe as this works out as very low.
My shot would have to be reduced to approx 50 PPI to obtain this low Res and the final print would be low grade.
Any comments here?
Has anyone used this printer and successfully printed on roll?

Hi,
Thanks for the information.
I also found a software called Qimage which, although a bit clanky to get used to managed to print to the 100".
I find it strange that CS3 cannot print these images. Even to print to 44 inches you have to rotate the image to Portrait first.
I'll buy Lightroom as large pano's are the requirement at the moment still, but Adobe need to address this issue, unles they deliberatley want us to purchase 2 applications, when one should be enough...
Thankls for the info again.

The paper after printing comes distorted and rolled with 2 sides

Hello! I've bought the HP LaserJet M1132 MFP All-In-One, and i've found that after printing (the quality is great) the paper comes rolled with both sides (left and right). The roll goes behind the printed side. When you put this paper on the table it's not straight, but like a hill.
How I can fix it? Only at service?
Paper is simple, A4 white, 80g/m2 office paper for laser printers.
1. HP LaserJet M1132 MFP.
Product number: CE847A
2. Snow Leopard 10.6.8
3. No errors
4. no changes
Thank you!

Dear Vitaly,
You may have same output with different functions (Print/Copy)
Make sure you output tray is empty and output tray is totaly open.
It seems there’s no problem with the printer, Please make sure you paper is perfectly dry and the humidity is normal with in the environment. It could be the papers laying for long time in you printer’s input tray and got effected by moisture.
Try with fresh papers from new packet.
Goodluck!
Tech.Pro

Panoramic image prints in wrong orientation on roll paper

Trying to print panoramic image on roll paper on Epson Silver 1280 printer. Image displays in correct orientation in print preview box but prints across the roll paper as a cropped portion of the image which is 11" X 43" horizontal format. It's a Photoshop CS image printed on G4 powermac in system 10-3-9. Printer connected to computer via usb cable. Everything else prints fine. Just can't print on roll paper. Any thoughts??

Also, just did this test:
I used all of my old settings:
Roll Paper selected
Ultra Prem. Photo paper luster
Super 2880 dpi
no high speed
And then I used the old paper profile for ilford gallerie smooth pearl. (I used this even though I'm currently printing on Ilford Prestige paper.)
And it came out with NO faint grey Border!
Then I tried it with all of those same settings, except I used the older profile for Ilford Gallerie Smooth Pearl for the ROLL paper (IGSPP11Roll_EPP4800_PSPPn.icc)
Then I got the grey border.
And finally just to make sure I wasn't crazy, I tried one more time:
All settings as above except I chose the GPSPP12_EPSpro4800_PSPPn
Which is the profile I downloaded to match the prestige paper.
And GREY BORDER!
So It seems like using the prestige profile was giving me the wash of grey. And also the roll paper version of the old gallerie smooth pearl also gave me a grey border.
But what should I do now? I want to use the proper paper profile so my colors and tones come out right. I don't feel comfortable just using the wrong paper profile just to stop the border.
On another note, I researched the Highlight Point shift (based on advice I heard from a friend) and that really sounded like what was causing it. However, I am not even seeing that on my printing options. I must be using a different driver or something. When I'm in photoshop, i just select "File - Print" and then go through that normal dialog. Is there some other way to print that gives me many more options?
Thanks to you all for your help so far.

Epson R3000 question. My issue is when I print on roll paper which is 13" wide, specifically custom sizes. Anyone else having an issue?

I can't seem to adjust my image size exactly what I want to print on my 13" roll paper. As an example, I have a panoramic photo that I wanted printed at 13" x 23" but the best I could custom size the print was 9" x 23". I didn't get any resolution yellow triangle errors, it just wouldn't let me get to those dimensions I wanted. I'm pretty new to all this so maybe I am doing something wrong. I have tried custom sizes, ICC profiles which I think more just for printing and color control. Any help would be appreciated.
By the way, the Epson R3000 is an awesome wide format printer if anyone was considering it.

I have tried cropping my photos in Aperture to the exact size I would like to print. I adjsuted paper size through custom dimensions, image size is either set to custom or roll paper. In the end it always seems to do whatever it wants. So I am wondering, am I asking Aperture and my printer driver to do something it can't do, therefore it restricts me? I bought this printer so I could print wide format images but they are too narrow. I don't want a 9" x23" image. I want a 13" by 27" image.
My other question is, I am shooting with a Nikon D90 12.6MP DSLR in RAW mode. Yet, when I try to get something to print like 13x24, I get the yellow triangle resolution error in Aperture. Apparently, the resolution isn't high enough, but it seems weird because my camera is taking inceredibly high resolution photos.

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Restrict printing a report on physical paper

HI All
I am generating online report from my Forms 10g application in the web browser in PDF format.
Now I want to restrict the user to take print of that report on physical paper based some application restrictions.
How do I achieve this?
Thanking You

Hi Oais,
I have a payroll report that should be printed on a sheet that is very large in width..even bigger than A3.
The client says thay are going to print it on paper rolls or something.If the client wants to print on whatever we developers do not have a problem.
We just need to adjust the width and height as required and then develop the report as required.
To set the width or height from Object Navigator, Under Layout Model you can find Header Section, Main Section and Trailer Section, just set the width and height as required.
Hope this helps.
Best Regards
Arif Khadas

HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)?
Any insight would be most appreciated.

Hi there cdyson44, Welcome to the Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing problem with cc and cs6 with epson 7890

Hi everyone,
I am having a serious printing problem. I use CC (14.2.1) and CS 6 (13.0.6) on Mavericks 10.9.1 on an iMac. If I try to make a print on a 24" roll I get an error message: cupsRasterinterpretPDD has an error = page header unsupported values. If I print A2 or A3 sheets everything works fine.
I contacted Epson because I thought it was a printer problem, but they insist it is a photoshop problem. I updated to the latest printerdriver.
Does anyone have any ideas or even better a solution?

I feel your pain, but I don't know the solution, sorry. Our Mac guru who primarily serves designers is not upgrading any of his clients to Mavericks so far, due to printing (and other) issues. Se we're still on 10.8.4 here.
This might help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967522
Or this: https://discussions.apple.com/thread/5546441
If those don't help, you might want to post your issue in the Apple Support Communities: https://discussions.apple.com/index.jspa
Good luck. :+)

"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error

Greetings...
I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on screen and then throws out the following error:
"Try Selecting a Different Printer or File Type" "Officejet Pro 8600 [5124FC] doesn't support this file type."
I can use ePrint from the iPad to print pictures from camera roll.
This only is problematic when I try to print web pages (I tried amazon.com for test).
I have no problems doing this from my iPhone...only the iPad.
I've tried rebooting device and trying again....same thing.
Anybody know how to fix this? I really want to be able to print web pages from my iPad.
Thanks in advance...
Possie

Hello Possie,
Thank you for the update. I have to say I'm surprised and disappointed that the uninstall and reinstall did not resolve the issue, especially since you can print the page from your iPhone.
I have spent some time researching this and working with my colleagues in HP's Cloud Services and we have a couple of suggestions/questions.
Do you get the same error when you try to print the web page using Apple's AirPrint feature?
Please ensure the iPad is connect to your home wireless network and try to print again.
Please try changing the settings in the ePrint app before printing the web page. Please ensure that the paper quality is set to normal (see screen shot below) and that the paper size is set to letter (see 2nd screen shot below).
Please let us know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing multiple page PDF document, printer won't cut between pages.

I'm using a large format printer, an Epson Stylus Pro 9600, and trying to print from a PDF. It prints fine, but prints as one continuous roll, instead of cutting between pages. I've gone through all of the Epson driver options, as well as options on the printer itself to try and get it to auto cut between pages, and it still won't. So I'm wondering if there's an option in Acrobat that I'm missing? Has anyone encountered this issue, or know where to look for the option I must be missing?

Print them separately then.
I don't think there is a solution that fits all (if "fit to Printable area" isn't good for you).

Printing Photos Misalignment Problem

I was getting constant jams using 5x7glossy print paper
It would pring one than jam, print one or two then jam.
Now it prints but cuts off about two inches of the photo which appears on the print as just white space.
I am getting no warning or indication of a malfunction on the machine.
I thought it might correct itself, by turning the machine off and a minute later back on, by printing new photos, but so far nothing works.
It does not affect normal text printing.
Would appreciate any help I can get.
efx

Hello @efx,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the printing issue that you're experiencing when printing photos on glossy paper from your HP Officejet Pro 8600 Premium e-All-in-One. Because normal text printing works fine, I am inclined to say that there is either a setting issue within the program that you're printing from or a roller issue that is causing the paper to 'slip' when being printed. Can I please have you follow the steps below to resolve this printing issue.
Step 1: Update Firmware:
To start troubleshooting I am going to have you send the latest Firmware Programming Update to your printer. The Firmware is essentially the 'brains' of your printer. It controls what your printer does and how your printer does it. If there is an issue within the internal programming in your printer it can cause your HP Officejet to not respond properly. Please click here to download and install the latest Firmware. Once the Firmware Update Tool launches, please follow the onscreen prompts to 'send' the Firmware to your printer.
Once the Firmware has been successfully updated please try to print again on the glossy paper. Should the printout still show cut off please proceed to the next step.
Step 2: Check Paper:
Never overload the paper tray. The maximum capacity of the input tray is 250 sheets of paper
Do not push the paper too far into the tray
Load only one type of paper at a time in the paper tray. Never mix different types, weights, or sizes of paper
Do not use paper that is bent, torn, wrinkled or curled
You can only print specialty paper (Photo paper) from Tray 1 on your machine
Step 3: Test Copier:
To verify if this printing issue is being caused by a setting within the program that you're printing from on your computer I am going to have you perform a Copy on the glossy photo paper.
Load the glossy paper in your paper tray. Ensure that the glossy side is face down.
Load an image you wish to test Copy on the flatbed glass on your machine
Touch the Copy button on the front panel
Select Settings
Select Paper Size: 5 X 7 inches
Select Paper Type: choose the Premium Photo Paper, Advanced Photo Paper, Everyday Photo Paper, or just Photo Paper. Pick the option that matches your paper type.
Once adjustments have been made please run a Colour Copy or Black Copy
If the paper feeds and copies correctly, than we know with 100% certainty that the HP Officejets hardware is functioning properly. What program are you printing photos from on your computer?
If the paper fails to feed and copy correctly, than this issue is being caused by your printer. What weight and type of glossy photo paper are you using?
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printing in a 44inch roll

Similar Messages

Maybe you are looking for