Printing in Acrobat X gives an extra unwanted line in the bottom margin

Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin. This margin should normally be blank. The line pattern follows the pattern of the print inside the margins. How can I print without this extra line?. The problem does not occur with the same documents opened in Acrobat Reader 9.4.

I had the same problem when I created my pdf for my Realtor flyer using microsoft publisher. I was able to get rid of the unwated line by using a png file in the publisher before generating the pdf.

Similar Messages

  • Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin

    Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin. This margin should normally be blank. The line pattern follows the pattern of the print inside the margins. How can I print without this extra line?. The problem does not occur with the same documents opened in Acrobat Reader 9.4.

    I had the same problem when I created my pdf for my Realtor flyer using microsoft publisher. I was able to get rid of the unwated line by using a png file in the publisher before generating the pdf.

  • When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

    when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

    marionfromclermont wrote:
    I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
    Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
    Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

  • Have HP Deskjet 1660; when I go to print 4x6 borderless photo there is still a border on the bottom

    I have HP Deskjet 1660 printer. When I want to print 4x6 bordeless photo there is still a border on the bottom of photo. Tried many times with no success.
    This question was solved.
    View Solution.

    The Deskjet 1660 cannot print full borderless on all 4 sides, there is a bottom margin of ~0.46".  To get a borderless print use "4x6in photo paper with tabs" such as here.  That paper has a microperf removable 1/2" tab that is removed after printing leaving a clean 4x6 borderless print.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 8620 printer automatic feed generates an unwanted line in the center of the page

    When using the automatic paper feed for copying or scanning, a line appears exactly in the center of the page, as the page is printed. This does not occur when using the flat bed scanner.

    Hey @briggsmmb, 
    Welcome to the HP Support Forum!  I understand you're having an ADF copy/scanning quality issue when using your HP Officejet Pro 8620 e-All-in-One Printer.  I would like to assist you with this and may have the troubleshooting steps you need to resolve the issue.  
    HP has an article that directly addresses the copy/scan quality issue you're describing:
    HP Officejet Pro 8600 e-All-in-One and Photosmart 7520 e-All-in-One Printer Series - Vertical Bands,...
    Try Solutions One through Four.  Does this clear up the line from the center of your copies and scans?  
    Please let me know the result of your troubleshooting by responding to this post.  
    Have a great day!   
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • My 4650 prints papers with a 45 degree black 1" line in the middle of the paper.

    I have an HP Photosmart C4650 using Windows XP and there's about a one inch long fairly thick black line near the middle of every page slanted to the right.  I thought it was the old cartridges because the ink had been low for a while.  I bought both new cartridges and installed them.  The alignment sheet printed without the line, but the first time I tried to print something out, that same line is still there.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • When I print out any web page, I get date/time at the bottom. I just want to print the date , what format do I use in page setup custom box ??

    I want to print just the time at the bottom of my printed page
    what format do I input into Page Setup>Custom box
    What ever I input it is shown in the actual format that I have input
    i.e date is shown as date not 28/06/2010
    == This happened ==
    Every time Firefox opened

    I do not know much on this subject. But check Window to see if
    all the languages you need are listed. Then check your other
    programs that, like Firefox, have their own language files.

  • Black line on the left margin when printing

    The printing functionality for a coloring book app working
    great in AS2. After porting to AS3 users get a black border on the
    left side of the page.
    Have anyone had this problem or know of any solutions?
    Thanks in advance for your time.

    use a white object on the left side of your display
    object.

  • Pixma MG6320 - Photos print with lines at the bottom

    I just setup my printer last night and tried to print some 4x6 photos.  When the first photo was printing, the paper went crooked at the last inch of the paper, and it was blurry.  I attempted 6 more prints, the paper stayed straight through the whole printing process but the last inch is printing blurry with lines going all across.  I made sure that the paper size and type settings are correct on the printer.  Has anyone had this issue?  Any assitance would be appreciated!

    Hello td512.
    Additional troubleshooting will have to be done to narrow down the cause of your issue.  Please contact our support group using the link below for additional assistance.
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • There is an unwanted space at the bottom of my home page.

    I created the site in Muse, and in the design view there is no margin or spacing at the bottom. The everything is set to zero, but for some reason when I publish the page and go to the live site, ther is like a 25 pixel margin at the bottom of the page. How do I get rid of that?

    Hi,
    Please send your .muse file to [email protected], add link to this forum post and refer it to me.
    Regards,
    Aish

  • Getting a extra space between the line in the PDF output

    I an having the rtf templete contains a table . That table contains 3 row and for the second row i have a for loop start at 1st column and end's at last column . first and 3rd row are the simple data donot have any for loop .
    So in the PDF out put of the templete gives me extra blank line between the data for the 2nd row.
    Example
    1st row ------ Contains data field
    2nd row For Each grouph data fields End for
    3rd row --------- Contains data field
    On the PDF output the data which is in the for loop ( 2nd row ) takes one more extra line ( space ) between the record .

    I an having the rtf templete contains a table . That table contains 3 row and for the second row i have a for loop start at 1st column and end's at last column . first and 3rd row are the simple data donot have any for loop .
    So in the PDF out put of the templete gives me extra blank line between the data for the 2nd row.
    Example
    1st row ------ Contains data field
    2nd row For Each grouph data fields End for
    3rd row --------- Contains data field
    On the PDF output the data which is in the for loop ( 2nd row ) takes one more extra line ( space ) between the record .

  • Need to print horizontal line at the end of main window in each page.

    Hi,
    I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
    Please suggest how to proceed.
    Thanks,
    RKU

    Hi,
    If you don't have any frame set on your main window:
    Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
    This will give you a line in the bottom of you main window.
    If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless  you mark this checkbox.
    Regards
    Åsa Thenstedt

  • Page Break-An extra blank page as the last page.

    I have a template with a page break (<?split-by-page-break:?>) at the end of the template prior to the end of loop <?end for-each?>. This is causing an extra blank page at the end everytime the report is run. I checked this forum and got some pointers and used couple of them but didn't get the blank page to go!
    I tried this in my page break filed! <?if:position()!=last()?><?split-by-page-break:?><?end if?>
    Please help.
    Thanks,
    Fran

    Hi, ive faced a similar problem in the past, I worked around it using subtemplates, but it still gives out an extra blank page if the content on the last page comes within 3 lines of the bottom of the page.. otherwise its ok..if you could send me your template and a sample xml file at domnic26ATgmail, i will see what i can do to help.
    regards,
    Domnic

  • What application do you use for extra/multimedia keys on the keyboard?

    Just curious on what applications there are available for all these extra keys manufacturers keep placing on keyboards, thankfully my keyboard only has a few extra and they aren't in the way. I've been using LinEAK for a while now but it doesn't seem to be maintained any more so I was wondering if there are any better alternatives.

    [vEX] wrote:
    con wrote:I use Xmodmap to get the keys to work...then just assign them actions throuhg the global shortcuts in applications
    If youre not gettign any codes, dmesg or xev, turn of the computer switch to the PS/2 port youre using USB to connect the keyboard, USB hid driver hasnt got the functionality to give those extra keys scancodes and the devs dont seem willing to do anything about it...
    Follow the wiki hotkyes instructions and you cant go wrong, someone posted link to them earlier.
    Not wanting to sound rude, but if you had even bothered to read the thread you would have seen that the keys are working fine with xbindkeys, it's the process of autostarting xbindkeys with openbox that doesn't work.
    However, I've now started using the built in keybind function in openbox, though for some reason I can't execute mpc commands (ie: mpc stop), it just won't work. Instead I have to use Sonata (ie: sonata stop), could the reason be that mpc outputs info while Sonata does not when you use those commands?
    EDIT: It wasn't, I added the --no-status switch but it still won't work with mpc.
    Actually i read every post in this thread before posting, sorry if came of sounding mean (sv:elak) or something. Thought you just wanted to know what apps ppl were using to get multimedia keys to work (alot of ppl seem to be having problems with this), didnt realize that you wanted help. Maybe choose a better title if you dont want too confuse ppl like me. Again sorry:)

  • Extra Blank line inserted at the end of the target file

    Hi,
    This is File to File senario and target files created with a extra blank line at the end of the file.
    Below is the source file structure and the content.
    <ns0:MT_MOD_FL xmlns:ns0="http://file2file/MES">
       <EMPLOYEE>
          <ID>12</ID>
          <Name>SREENI</Name>
          <Designation>M2</Designation>
       </EMPLOYEE>
       <EMPLOYEE>
          <ID>121</ID>
          <Name>RAJA</Name>
          <Designation>M3</Designation>
       </EMPLOYEE>
    </ns0:MT_MOD_FL>
    Below is the generated target file
    12     SREENI     M2
    121     RAJA     M3
    Here Generated target file suppose to have only two line instead of 3.
    What exactly do i need to change to generate the file with 2 line.
    I am not using any mapping as both source and target message structure are same.
    IN FCC i used only fieldSeparator, even i have not used endSeparator.
    Thanks in Advanace...

    Hi! Raghu,
    Just go through the below Help..documantation
    [http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
    NameA.endSeparator
    To define an additional string as a separator after the last column in a row, specify it here. The system skips this string when it processes the last column (otherwise the system would treat it as part of the last column).
    NameA.fieldSeparator
    If you make an entry here, the system expects that the structure contains the specified character string (one or more characters) as a separator between the individual columns.
    If you have not made an entry for fieldFixedLengths, this is the only specification to identify the individual columns in a row.
    If you made a specification for fieldFixedLengths, the extra length of the separator is taken into account, but no further consistency checks are performed.
    Regards::
    Amar Srinivas Eli

Maybe you are looking for

  • Error while reading the PO in the Backend system. Inform system admin

    Hi All, We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'. The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system. No error messages or logs in RZ20, S

  • Sort order in forms 10g

    Hello. I just realized migrating an application from forms6i to forms10g. In a list of values, elements are sorted alphabetically. In forms 6i, the sort is : 1 2 3 A B C D But in forms 10g, the sort is different. A B C D 1 2 3. Is there a way to chan

  • Begginer Question

    Hello all, Just need some assistance to make one thing to work. I need to create one simple animation that will be in the beginning of the website, kinda promotional thing, and then go to another flash (main flash). I do the animation for about 30 se

  • Dynamic Loding a class

    Hi, How can i load a class dynamically?explain me and give me small example

  • HT1725 I having problem with my download items that I purchase off itune

    I having issue with download the items i have purchase on itune website