Printing in Book Format

I'm experimenting and would like to print a very large document in a format resembling a book - landscape, left and right pages on one A-4 page (Eventually I'll be formatting my own A-5 book). Can someone please advise how to save it and print this way? Thx.

Try here:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=181&mforum=iworktips ntrick
It discusses all aspects of printing step by step.
Peter

Similar Messages

  • How can I print a pages document in book format ..order?

    How can I print a pages document in book format ..order?

    This is usually a function of the driver you're using. Have you looked in the various PDEs for black and white or grayscale? What kind of printer are you using?

  • Printing address book on day-timer portable page

    Anyone have any suggestions for the page layout to print address book to Day-Timer Portable page format? They don't give any options (like Avery 5160, etc). My wife still likes her addresses printed out for her Day-Timer book. The old app that she previously used on her old Mac no longer works on the new OS on her MacAir.

    I used to have the Palm Desktop application on my old Mac and that what we used to printout the Day-Timer Portable page format. Of course the Palm Desktop app no longer works on the new Mac OS. I guess if I could get the page layout for that app, I could duplicate the layout.

  • I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

    I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

    That is not the issue.
    Pages/OSX does not save files with crop marks and bleeds.
    It also by default saves transparency, which is involved in a lot of Pages' better features, at a rubbishy 72 dpi resolution.
    It also makes it extremely difficult to maintain mono-color like black only text, has no spot color and makes color management opaque.
    It really is only meant for amateur publishing and printing to your desktop printer.
    A commercial printer who is willing to use and print from Pages may have better results but at the cost of considerable micro-management which defeats the point of this "cheap" solution.
    Peter

  • How to create a book format on pages for macbook?

    im trying to make a book and im trying to find a format on pages but i can't find any.. does someone knoow how to do it ??

    Are you going to print the book yourself? Is it going to a printer or is it for e-pub?
    There isn't any template in Pages for books. You can look for a template here iworkcommunity.com

  • Can't print a book out of aperture

    Hello
    I'm trying to print a 'book' out of aperture, and it's telling me it won't ship to my default address, yet
    when i try to enter a new address, it tells me to try again later,
    anyone else having a similar problem?
    thanks!

    Are the shipping address, the address used with your AppleID, and the address used with your Credit Card all in the same country? And is the Region in the System Preferences also set to the same country?
    Aperture will use the print products store of the country you set in the System Preferences, and there your AppleID and credit card must be valid and the shipping address must be in that country.
    When you enter the shipping address, check for any formatting errors; the Print Products store is very particular about the way the zip code is written.
    Check the page for the Print Products Store of your country, for the US it is here:
          Apple Print Products - Apple Store (U.S.)
    And for other countries look it up on this page:
    The Apple Store - International Print Product
    The problem may also be, that Aperture cannot contact the print products store and there is a time out. Make sure, that no fire wall (e.g. little snitch) or antivirus filter is interfering.
    Leonie

  • Printing Address Book Contacts

    I’m trying to print the address book contacts by going to print>address book>style: lists, but the results are poor. I could not adjust the margins or width of the column and the labels overlap the content. I would like to print all the information including the notes. I went through troubleshooting of the fields in every card but that didn’t help. I tried Entourage but didn’t like the result. Is there any other third party software or plug-in that can help me with this task? Somebody here suggested to drag the contacts into Numbers and format it in that application but I could not get the note field in. Thank you for any thoughts and suggestions.
    easyW

    I'm having the same problem. Couldn't find any mention of how to fix this in the manual. Apple is slipping?

  • Why can't I print a book with iphoto 09?

    I have a book under "keepsakes" that it says (0) next to the name of the album. But when I open it up you can see the pictures in there. I can't print the book though when I'm ready to input the number of copies that part is in gray and it won't let me choose one. I tried with another album and it doesn't work either.
    Any suggestions?
    Thanks

    Paulina,
    Sorry I don't know the answer to your question, however you may have better luck posting in the iPhoto forum, click the link and it will take your there. Then repost, that forum is where the iPhoto guru's hang out if you can't get help on this forum.

  • When printing a book to PDF, bookmark definitions are not saved

    I recall seeing another post about this issue and I can't find it now, but none of the workarounds mentioned there worked for me, so here goes:
    I am working on a book migrated from FM 9 to FM 11, and when I print to PDF, I specify the bookmarks I want to display in the Bookmarks tab of the PDF Setup for Selected Files dialog. The PDF prints fine, but when I want to print the book again, FM doesn't remember my settings, forcing me to set the bookmarks from scratch every time. This has proven pretty tedious seeing that I'm working with an old book in which the styles aren't intiutive, so trying to remember all of them every time isn't the best of fun. When I print a single file in the book, the settings are saved properly.
    In the previous post, I remember reading that this was a bug in FM and trying the following suggested workarounds (none of which worked): Switching to structured mode; saving the desired setting in one file in the book, printing that document, and then printing the book (was supposed to result in FM remembering the settings for the entire book); saving the book right after it prints; selecting all files in the book and saving as PDF, as opposed to selecting the book and then File > Save as PDF.
    I'd be glad to know if anyone has any ideas, or if Adobe are planning to post a fix for this issue.

    It is my understanding that FrameMaker uses the setting stored in the first document of the book when creating a PDF from a book. So, open the first file in the book and make a PDF, setting your bookmarks as you want for the whole book. Then create the PDF of the book. Check the settings before you click Print to make sure they are what you want. You may have to make a few changes, but it should remember them the next time.
    I work with FM 9, so this may not be relevant to FM11. I find it necessary to open the PDF settings dialog each time I make a PDF of a book, and click Save/OK/whatever, to make sure the bookmarks are created correctly. The settings are always correct, no changes needed; but I find it necessary to open the dialog and close it to get the bookmarks correctly indented in resulting PDF. It may have been fixed in FM11.
    Van

  • Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

    Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in  my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

    What system are you running?  Have you tried going to the Canon website to download and install the latest drivers for that model?
    Are you running Time Machine?

  • Unable to print in excel format

    Hi,
    I develop report in xml publisher and my apps version is 11.5.10.2
    But my report is not printing in excel format.
    Any idea on this....
    Regards
    Zaheer

    Hi Zaheer;
    Please check Hussein Sawwan greatest previous post:
    Re: Unable to View Excel Output File Created by XML Publisher
    Regard
    Helios

  • Microsoft Word- printing a books?

    I can't seem to figure out to get my Microsoft word to print a book. On a Windows PC, there is the option to print a document in booklet form, where the pages are doubled and you can print entire books this way.
    i see a lot of questions about Aperture in relation to book printing, but I don't want to pay for printing my books nor do I want to have to save it in PDF. What a giant pain. Am I just too daft to find the option for printing bookfolds in Microsoft Word or was Apple being a greedy monopolizing cretin by removing that option and forcing us to buy Aperture?
    P.S. If anyone has any freeware that doesn't require PDF conversion and is simple, please do tell. Thanks.

    Office comes with extensive help. I suggest you take the time to look in the help files for the answer. Word is quite capable of printing in book form but your document layout needs to be properly configured.

  • Not Able to Print in PDF Format Apex

    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
    Can any one please help me on this issue....
    Thanks
    Malleswar

    Hello Malleswar,
    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
    If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
    If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
    -Udo

  • Really quick question about printing a book

    hello,
    always asking questions... but you people on these forums are super nice and smart....
    if i should upload the pictures to iphoto to print a book should i export the pictures as AdobeRGB 1998 or ProPhotoRGB .jpegs????
    the website only says jpegs..... what would my best choice be.....????
    answers are appreciated and thank you in advance

    Yes - do not use Adobe RGB - sRGB is correct
    and test a few photos - some people have had problems importing Lightroom edited photos into iPhoto
    LN

  • Looking for some creative guidelines for book formatting

    I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc.  I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
    Does anyone know of a resource where I could find some guidance on this?

    craigatadobe12345 wrote:
    I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc.  I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
    Does anyone know of a resource where I could find some guidance on this?
    Self-Publishers Start Here: Planning Your Book
    This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

Maybe you are looking for