PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

i recently bought HP Laserjet pro 100 color MFP M175a but it prints like 40 pages and goes to cool down mode and it takes like 10 minutes to cool and again it prints 40 pages so i donot the problem

Hi @teko2014,
I see by your post that the printer keeps going into a Cool-Down mode. I can help you with this. I can help you with this.
I have provided a document with Resolving Control Panel Messages.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 100 color MFP M175a Drivers.
Select your operating system, click next, click the link for firmware.
Where is the printer located? (enclosed cabinet, desk)
If the printer is in a enclosed area, temporarily move it to another open location and try printing again.
What is the paper's weight and what kind of paper are you using?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??

Can the LaserJet Pro 100 Color MFP M175nw print envelops in c5??
Thank you

Hi,
Which application are you using ? Under Word, you can check it yourself using Print Envelopes as shown:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

Hello! I have a
HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
Please help me.
Thanks!

Hi Tolick,
Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address? If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you.
HP ePrint Software User Guide
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Print in Black ink only - HP LaserJet Pro 100 color MFP M175nw

Hi, I have a HP LaserJet Pro 100 color MFP and use Mac OSX. How do I print in black ink only? I want to turn the colour ink off . . . I'd greatly appreciate any help. Thanks in advance!

Hello @Bob_Loblaw ,
Welcome to the HP forum.
I understand that you want to print in grey scale. I would like to help you with this.
I found some instructions on Cnet. How to print in grayscale in OS X.
There is also a short video on YouTube. Print Black and White on a Mac
Hope you find these helpful.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I have an hp laserjet pro 100 color mfp m175. how to i get the printer online?

Product name: LaserJet Pro 100
OS: Windows 7
My printer will not print. Windows says the printer is not online. I have checked cables and tried rebooting my computer. Also turned printer off and turned it back on. My print jobs are stuck in the print que.

Hi Stickdude,
Follow the steps in the document at the link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02241610&tmp_task=solveCategory&cc=us&dlc=en&la...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Problem downloading software for HP Laserjet Pro 100 Color mfp m175nw

The window xp computer recognizes the hp laserject pro 100, but I can not install the software. I tried using the CD, the hp smart intall and installing it from the website. Nothing works. When it says printer found and it reads this my take a few minutes, it is still on 0% and it has been days. We need the software so we can scan. Thanks for the help

Ok, I have a few questions:
1. Do you have Administrative rights on the computer? If so, try right clicking on the installation and choose to run it as administrator.
2. Was the printer, or any other HP printer, previously installed on this computer?
3. How is the printer connected to the computer (wifi, usb, ethernet)?
4. Have you tried to install any other software recently?
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

Hi
I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
Please help!

Hi rachelwallace,
Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
You could restore the printer's defaults and try one more time.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Try the previous steps for setting up the Adhoc to Infrastructure connection.
If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Since the software is already installed, all you have to do now is add the printer on the Mac.
Click the Apple icon ( ), and then click System Preferences.
Click on Print and Scan.
Click on the + sign.
Highlight the printer in the list.
Click on the add button.
Test the printer.
In case you don't have a Ethernet cable you may try the wireless direct setup.
On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the Mac, click on the Airport and select the printer from the list to connect to.
Then open Safari and type in the IP address for the wireless direct (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Click on the Airport and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Then add the printer on the Mac.
Test the printer.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer keeps showing "not connected" in ePrint - HP LaserJet Pro 200 color MFP M276nw

The printer works fine for a while, then goes offline. I've basically got to kick start it again to get it to reconnect to web services. There's got to be a better way? This thing seems buggy.

So the printer is going offline and you are losing your web services? Have you updated the printer's firmware, yet? There is actually a fix for this at www.hp.com/support. Just select the green box that says Software and Drivers and type in the name of your printer and press the enter key. Next, select the operating system of your computer, download and install the firmware update located on that web page. If you have any more questions I am more than happy to help.
However, if this doesn't fix the issue, I will need to know some more information. Like what is the operating system of your computer (Windows 7 64 bit, Windows XP 32 bit, Mac OS Version 10.8, etc)? How is the printer connected to the router (ethernet or wireless)? Are you having any other problems as well (please be specific with any error messages if so)? What is the printer's IP address? And lastly, are any other devices having similar problems?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP Laserjet Pro 100 Color MFP M175 expired printer code

When signing on to eprintcenter.com it says my printer code is expired. When I try to print an information sheet from the printer it says it is 'Downloading from the Web', but then just goes back to Ready without printing.

Hi TerriLG,
The printer code that was generated is only good for 24 hours. So you will need to disable and then re-enable Web Services to get a new printer code. Make sure and register the new code right away or it too will expire.
On a Laserjet, you will need to access the EWS (embedded web server) for the printer. To do this, find the IP address of your printer and enter that address in your web brower on your PC. There should be a "Web Services" tab within the EWS.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP LaserJet Pro CM1415fnw color MFP printing & scanning problems

Ever since I purchased this multifunction color printer, it has been unreliable. My Mac Mini running the latest OS (currently Mavericks OX 10.9.2) will be printing and scanning fine, and then at some point it can't find the scanner, the printing slows to an amazing crawl, and then the printing stops altogether. I have repeatedly attempted to set up the printer under Preferences and have installed the latest drivers from the HP website. When that works, it's a short-term fix; eventually, the bugs come back. The darn thing won't scan or print again, and I'm pretty fed up. I paid a premium price for a premium color multifunction printer for my home, and it has been nothing but a problem. Help!

Hello StoopBoy,
Welcome to the HP Support Forums.
I see that you have an HP LaserJet Pro CM1415fnw color MFP being operated on a Mac 10.9.2. The CM1415fnw will not maintain a continual connection to the computer displaying errors and very slow printing. Since you have done a great job already troubleshooting the issue some of the steps I suggest will have already been done by yourself.
I suggest you take these steps to help resolve the issue:
1. Reset the Printing Systems by following this Apple Document: Mac OS X: How to reset the printing system.
2. Uninstall the HP LaserJet Pro CM1415fnw color MFP with this HP document: Uninstall HP printer software.
3. Repair disk permissions on the Mac.
4. Check for and install any and all updates on the Mac.
5. Downlaod and Install the printer HP LaserJet Pro CM1415fnw color MFP software.
I hope this helps and will allow you to have more continual functionality with your Laserjet.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

Hi !
OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
This question was solved.
View Solution.

Hi @Up205,
I see by your post that you are having issues manually printing two-sided. I can help you with this.
The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
HP LaserJet Pro 100 color MFP M175nw Drivers.
Check to make sure Bidirectional Support is Enabled.
Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
You might have to restart the computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP printing in cool down mode

Dear HP Forum, I have the same problem with my m177 printer, always printing in cool down mode. Very frustrating. Please send me solution urgently. Thanks, Yuta10

Hello there , Welcome to the forums I read your post about the troubles with Cool Down Mode, and wanted to reach out with my suggestions. First, please see the recommendations for this concern from my colleague in this thread here: mfp m177fw ALWAYS Display Printing.... Cool-Down mode If the problem continues, then please contact HP directly to discuss your printer replacement options: Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. Have a great day

HP LaserJet Pro 200 color MFP M276nw - Printing problems with HPeprint App on Ipad mini

Hi,
my name is Domenico and I have the following problem:
I have setup my HP LaserJet Pro 200 color MFP M276nw in HPePrint App on my Ipad mini, but I am able to print directly.
When I send a page to print through my tablet, on the printer screen I can see the following message:
"Manual feed.
Plain, A4
Or press [OK] to use available media"
So, I have to press OK on the printer screen to print the page.
How can I avoid this problem?
Thanks,
Domenico

solved!!!
Domenico

Sleep mode LaserJet Pro 200 color MFP M276nw

Hello, My LaserJet Pro 200 color MFP M276nw seems to have gotten into some sort of "sleep" mode:When I send something to the printer, it no longer prints, until I touch the LCD screen which seems to "wake it up," at which point it prints the documents in its queue.Any information as to how to get it out of this mode would be appreciated. Thanks.

Hi hpr7busr, Welcome to the HP Forums.
I see that you are having issues with the printer waking up from sleep mode.
I will be happy to help you. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) How is the printer connected? (USB/Ethernet/Wireless) It may not be the printer, it may be your router's inability to wake the printer if the printer is networked.
What router are you using?
Can you get into its settings?
If you can then look for and enable "Multicasting".
If not you will have to contact the router company.
Disconnect the routers power cable next time this happens, wait 10 seconds, then reconnect the power cable. Wait till it's ready. Try printing again. If it prints then it is a communication issue between the printer and the router not recognizing the printer. I have provided a document to setup a static IP address on the printer for better communication between the router. Printer Does Not Maintain a Wireless Connection.Solution three: Assign the printer a static IP address. This information was provided by the manual. LASERJET PRO 200 COLOR MFP. Starting from page 137. The product automatically wakes from the auto power-down mode when it receives jobs or when
you use a button on the control panel. You can change which events cause the product to wake.
Open the following menus:
œ System Setup
œ Energy Settings
œ Auto Power Down
œ Wake Events
To turn off a wake event, select the event and then select the No option or yes. Check out the settings to make sure they are set properly. You can set the sleep delay on the printer, but the default setting is 15 minutes.
1. From the Home screen, touch the Setup button.
2. Open the following menus:
● System Setup
● Energy Settings
● Sleep Delay
3. Select the time for the sleep delay.
Let me know how this goes for you!
Thank you for posting on the HP Forums.
Have a great day.

PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

Similar Messages

Maybe you are looking for