Printing in CS4 and Margins

In Adobe CS4 how does one print 18.25 x 12.25 without adobe adding its margings to it. I just can't seem to get it right.

If you click the little selector at the top-right of the print dialog and choose Output, then click the [ Border... ] button, is it zero?
Yes.
Here is my setup in Print window:
Center is check
With Top set at 0.145 and Left set at 0.111
Scale is at:
Hight 18.5 and Width 12.5
When I look at the preview box of the document it is not centered. There is a smaller margin on the left and a wider margin on the right.
The top margin is smaller then the bottom margin.
Thanks, Joe

Similar Messages

Trouble Printing with CS4 and Epson

I wish to print a 13x19 photo on my Epson Photo Stylus R3000. After entering all the info correctly with paper size, type, quality, etc I get a print with a one inch blank border on the top and bottom. I called Epson and they said it was not their problem, it must be something with Adobe. I am using Photoshop CS4 and Windows 7. Help, please. Doro

So, I found this little piece of info on Epson's site, the question doesn't quite match our problem, but the answer (you would think) would fix us...
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
I followed the instructions to the letter.... no results, I still don't see the driver in the drop-down list of available Printer Drivers!

Printing blank pages and margins

hi,
I am trying to print an illustrator document and I am having 2 issues:
1. I don't know how to alter the print margins.
2. I have 6 pages all up and only 5 are showing showing in the print preview, 1 is just showing and printing as blank and I can;t figure out why.
Thank you.

We can't know. you have not provided any exact details about your document, your system, your version of AI, your print settings, your printer. You need to do a lot better and explain properly.
Mylenium

CS4 and EPSON R2880 Printing Problems

I am having a very difficult time getting color matched prints with CS4 and my R2880 Epson printer. I had no issues with CS3. I have tried every combination available to me and I get very drab almost browinsh prints. I have the latest drivers and also have upgraded to Vista, no change there at all. I am using the proper ICC profiles as well. Anyone else with similar problems? Any solutions? It is very frustrating. Thanks, Bob

I have an Epson R280 on my desk and just did a test printing the same image with CS4/Vista64, CS4/XP, and again with CS3/XP. All three prints used the Epson supplied paper profile and the colour management settings were all set the same.
The results are identical.
I suspect there's a wrong setting somewhere:
- wrong profile being used
- not disabling printer colour management
- wrong paper setting or printing on the wrong side of the paper
I can't imagine why the results would be any different from one version of PS to another.

After Upgrade to os 10.6.8 Prints from CS4 Photoshop show blue tint outside the printing area

After Upgrade to os 10.6.8 from 10.5.8 Prints from CS4 and 5.5 Photoshop show blue tint outside the printing area, not so when printing from CS2. I could not beleive this was still an issue. Is there any known solution to this long ongoing and well known dispute between apple and adobe?

After Upgrade to os 10.6.8 from 10.5.8 Prints from CS4 and 5.5 Photoshop show blue tint outside the printing area, not so when printing from CS2. I could not beleive this was still an issue. Is there any known solution to this long ongoing and well known dispute between apple and adobe?

Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open

(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?

Illustrator CS4 and CS3 crashing on two different mac's - can not save or print

We have two Macs running 10.5.6, with CS4 and CS3 installed. Both systems seem to be crashing today when trying to save, print, etc any file. Some files that were created in CS3 that are older seem to be opening and saving. But anything I know was worked on yesterday are having issues on both systems.
Anyone have any ideas?
I have tried trashing the preferences, and also booting in safe mode and still get crashes.

I just tried an uninstall of Illustrator - then reinstall. Did not work either. Here is the report I am getting if anyone is interested:
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x971dc133 CFStringGetCString + 307
1 AdobeAGM 0x0156c7fe AGMInitialize + 1378702
2 AdobeAGM 0x0156d57b AGMInitialize + 1382155
3 AdobeAGM 0x0142da38 AGMInitialize + 72648
4 com.adobe.illustrator 0x00a12d91 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 21805
5 com.adobe.illustrator 0x00023973 0x1000 + 141683
6 com.adobe.illustrator 0x0002413c 0x1000 + 143676
7 com.adobe.illustrator 0x0002cd33 0x1000 + 179507
8 com.adobe.illustrator 0x00032a86 0x1000 + 203398
9 com.adobe.illustrator 0x000206b6 0x1000 + 128694
10 com.adobe.illustrator 0x0002099a 0x1000 + 129434
11 com.adobe.illustrator 0x0004d399 0x1000 + 312217
12 com.adobe.illustrator 0x0040c4b8 0x1000 + 4240568
13 com.adobe.illustrator 0x00020cf9 0x1000 + 130297
14 com.adobe.illustrator 0x00021157 0x1000 + 131415
15 com.adobe.illustrator 0x0022890f 0x1000 + 2259215
16 com.adobe.illustrator 0x0022a557 0x1000 + 2266455
17 com.adobe.illustrator 0x00472687 0x1000 + 4658823
18 com.adobe.illustrator 0x0027b1dc 0x1000 + 2597340
19 com.adobe.illustrator 0x0027bb3b 0x1000 + 2599739
20 com.adobe.illustrator 0x0027bf0d 0x1000 + 2600717
21 com.adobe.illustrator 0x000a2ad9 0x1000 + 662233
22 com.adobe.illustrator 0x000a24ea 0x1000 + 660714
23 com.adobe.illustrator 0x000a263a 0x1000 + 661050
24 com.apple.AE 0x909df8e7 InvokeAEEventHandlerUPP + 29
25 ...r.plugins.Scripting Support 0x1bc404e6 0x1bc20000 + 132326
26 ...r.plugins.Scripting Support 0x1bcbbdcb PluginMain + 605
27 com.apple.AE 0x909d1648 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 144
28 com.apple.AE 0x909d157e dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
29 com.apple.AE 0x909d1425 aeProcessAppleEvent + 177
30 com.apple.HIToolbox 0x937a49a5 AEProcessAppleEvent + 38
31 com.apple.HIToolbox 0x93802e46 AEProcessEvent + 160
32 com.apple.HIToolbox 0x93802d99 HIStdAppHandler::HandleEvent(OpaqueEventHandlerCallRef*, TCarbonEvent&) + 219
33 com.apple.HIToolbox 0x9380003a TEventHandler::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 70
34 com.apple.HIToolbox 0x9377a143 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
35 com.apple.HIToolbox 0x9377957d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
36 com.apple.HIToolbox 0x937793e2 SendEventToEventTargetWithOptions + 58
37 com.apple.HIToolbox 0x937a7d54 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 356
38 com.apple.HIToolbox 0x9377a4fc DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2134
39 com.apple.HIToolbox 0x9377957d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
40 com.apple.HIToolbox 0x93795ed2 SendEventToEventTarget + 52
41 com.adobe.illustrator 0x00080d3e 0x1000 + 523582
42 com.apple.HIToolbox 0x9377a143 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
43 com.apple.HIToolbox 0x9377957d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
44 com.apple.HIToolbox 0x937793e2 SendEventToEventTargetWithOptions + 58
45 com.apple.HIToolbox 0x937a7d54 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 356
46 com.apple.HIToolbox 0x9377a4fc DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2134
47 com.apple.HIToolbox 0x9377957d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
48 com.apple.HIToolbox 0x93795ed2 SendEventToEventTarget + 52
49 com.apple.HIToolbox 0x93802b80 ToolboxEventDispatcher + 86
50 com.apple.HIToolbox 0x937ff3da RunApplicationEventLoop + 222
51 com.adobe.illustrator 0x00080f83 0x1000 + 524163
52 com.adobe.illustrator 0x000d84ab 0x1000 + 881835
53 com.adobe.illustrator 0x000a2cd2 0x1000 + 662738
54 com.adobe.illustrator 0x00003672 0x1000 + 9842
55 com.adobe.illustrator 0x00003599 0x1000 + 9625
Thread 1:
0 libSystem.B.dylib 0x92b3520e semaphore_wait_signal_trap + 10
1 libSystem.B.dylib 0x92b67206 _pthread_cond_wait + 1267
2 libSystem.B.dylib 0x92bac539 pthread_cond_wait + 48
3 com.adobe.amt.services 0x047c9552 AMTConditionLock::LockWhenCondition(int) + 46
4 com.adobe.amt.services 0x047c4995 _AMTThreadedPCDService::PCDThreadWorker(_AMTThreadedPCDService*) + 115
5 com.adobe.amt.services 0x047c95b0 AMTThread::Worker(void*) + 20
6 libSystem.B.dylib 0x92b66095 _pthread_start + 321
7 libSystem.B.dylib 0x92b65f52 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x92b65906 kevent + 10
1 libSystem.B.dylib 0x92b66095 _pthread_start + 321
2 libSystem.B.dylib 0x92b65f52 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x92b35226 semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x92b671ef _pthread_cond_wait + 1244
2 libSystem.B.dylib 0x92b68a73 pthread_cond_timedwait_relative_np + 47
3 ...ple.CoreServices.CarbonCore 0x91229dd2 TSWaitOnConditionTimedRelative + 246
4 ...ple.CoreServices.CarbonCore 0x91229bb2 TSWaitOnSemaphoreCommon + 422
5 ...ple.CoreServices.CarbonCore 0x9125a9c8 TimerThread + 74
6 libSystem.B.dylib 0x92b66095 _pthread_start + 321
7 libSystem.B.dylib 0x92b65f52 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x92b3c3ae __semwait_signal + 10
1 libSystem.B.dylib 0x92b66d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x9124aecf TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x91229da6 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x9124ab4c MPWaitOnQueue + 208
5 AdobeACE 0x0130a38d 0x12d9000 + 201613
6 AdobeACE 0x01309d85 0x12d9000 + 200069
7 ...ple.CoreServices.CarbonCore 0x912490a3 PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x92b66095 _pthread_start + 321
9 libSystem.B.dylib 0x92b65f52 thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x92b3c3ae __semwait_signal + 10
1 libSystem.B.dylib 0x92b66d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x9124aecf TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x91229da6 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x9124ab4c MPWaitOnQueue + 208
5 AdobeACE 0x0130a38d 0x12d9000 + 201613
6 AdobeACE 0x01309d85 0x12d9000 + 200069
7 ...ple.CoreServices.CarbonCore 0x912490a3 PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x92b66095 _pthread_start + 321
9 libSystem.B.dylib 0x92b65f52 threa

Photoshop CS4 and Mountain Lion Printing Question

I recently downloaded CS4 onto my new Macbook Pro Retina running Mountain Lion and I am not able to print from CS4 to my Epson 3800 printer. When I hit the print button, the light on the Epson 3800 blinks one time but nothing happens. The file does not even get sent to the printing queue.
Photoshop CS4 otherwise works perfectly fine on my Macbook Pro Retina. Additionally, all other applications on my Macbook Retina print perfectly fine on my Epson 3800. For example, I can print from Aperture to the Epson 3800 just fine. I am using the most recent Epson driver from the Epson website.
Any suggestions would be greatly appreciated.

Hi Peter,
Since your Epson 3800 printer is working fine with other applications, one workflow work around would be to export your Photoshop file as another format (for example .jpeg, .png, .tiff or even .pdf depending on what your content is). By exporting it as another format, you can open it using other applications (such as Acrobar Reader, or Preview) and print from there. While this is not the most ideal lsolution, it should do the trick if you are in a rush to print.
To help troubleshoot and solve this problem in the long run, you can take a look at this help page: Trouble Shooting Printing Problems, Photoshop CS4 Mac OS.
This helpful page lists all the possible things you can do to reset or fix the problem, it also lists a number of alternatives.
Hope this helps!
Clarice

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

HELP!! Photoshop cs4 and Windows 8 - Printer Not Found

Just installed PS cs4 on my new all-in-one with Windoz 8 and my cs4 is saying that there is no printer installed. I can print from other sources like disks and picture viewer. Are there any fixes for this??? I REALLY don't want to purchase yet another license for cs6!

If you search Google using the terms "CS4 and Windows 8 compatibility" you can probably find various results from both Adobe and Microsoft that should give you some idea of how much of a gamble you might face in changing your OS.
In my own experience, a change in OS has yet to be a positive experience... while most people loved XP in its day, I suffered years of poor performance with it as an upgrade from the moment it was installed and regretted doing it. Maybe you've had better experience and aren't as shy of it as I am.

How to Copy Excel table into CS4 and print onto photo in sequence.

I would like to be able to import fields from Excel into Photoshop CS4 and have the Excel information print directly onto the photo image as a line of text across the bottom and layered over the image itself. This Excel information needs to be able to change sequentialy (eg: ascending numbers, etc) with each new photo. Is there a way to do that with CS4 (or do I need a later version of Photoshop) ?

Hi,
I'm not sure, but your best bet would be ask over in the photoshop scripting forum.
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
It's possible the variables feature in photoshop cs4 could do something like that:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7417a.h tml

I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

See this support document. http://support.apple.com/kb/TS5185

CS4 and Printing Problems

I have just upgraded to Photoshop CS4.
I am running Mac OS 10.4.11 on a G-5 iMac.
I have a high end Canon CLC color printer/copier.
I have spent hours on the phone with Adobe (spoke with guys in 3 different countries) and with Canon.
All drivers are current and my system has all updates.
I can not print to the Canon within CS4. I can from CS2 and every other program and have.
My partner has a (intel) MacBook Pro running OS 10.5x.
He can print from C4 to the Canon.
Has ANYONE experiences any problems printing to a network printer (not a bonjour printer) from CS4 in OS 10.4.11??
My fear is that CS4 really needs OS 10.5x.
I am still running 10.4.11 because I am a Freehand power user.
Thanks for your help.

This is a high end color network printer/copier (Canon CLC 1110).
It is connected via ethernet to a switch thru a router (Airport Base Station) (which is connected to a cable modem).
My computer is connected via ethernet to the switch. (Not via airport)
I can not directly connect to the printer. Other designers need to print to it as well. They have no problems because they have not upgraded to CS4.
My partner can connect via airport. He is on a MacBook Pro running OS 10.5.4 and CS 4.
My issue is... Does OS 10.4.11 really work with CS4 on a G-5? (The documentation says so, but...)
While I can run the app- I can not print from it to the network (LDP) printer.
I can print to a bonjour printer (HP Laserjet 1320n).

Printing differences between photoshop cs4 and LR 2.3

printing using a canon 9000,
when I print in LR the prints com out very, very low contrast. I have imported into PS CS4 and print looks like it does on the screen.
I can't find what print setting I'm missing in LR, I'm guessing there is software switch somewhere.
Thanks, for any help.
Kevin

letting the printer handle it, I used the same paper on both prints.
Thanks,
Kevin and Sue Hanley
www.cheddarheaddesign.com

More on Photoshop CS4 and Epson print drivers

I just got my Epson Stylus Pro 7900 with the SpectroProofer option. One thing the SpectroProofer enables is bypassing everything to talk to the printer directly. I made up a sample target (based on Bill Atkinson's RGB 5x12 Hues Target) and printed/measured this with the SpectroProofer. I then took the output printed by the SpectroProofer and measured this manually with MeasureTool and my Eye-One Pro (Rev B ). The average/worst correlation was 1.00/2.02 Delta E 2000, good enough for me given two different instruments and the SpectroProofer patches are a tad narrow for the Eye-One.
I then printed the same target with Photoshop CS3 and No Color Management and this compares well with the SpectroProofer output (0.69/1.90). So I have confidence that CS3 is passing the data directly.
I then printed the target again with Photoshop CS4 and No Color Management, same driver settings and get a CS3/CS4 difference of 3.22/10.25. I repeated the CS4 readings and get 3.21/10.29.
The odd man out here is CS4. The differences between the CS3 and CS4 printouts (remember both with No Color Management) are clearly visible. GIven that the Epson 7900 drivers are brand spanking new, I'm not expecting architectural changes in the short term so I plan to stick with CS3 for profiling/printing.

You may want to explore the solution given and explained by Eric Chan:
Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
Eric Chan - 6:07am Dec 12, 08 PST (#12 of 16) Edited: 12-Dec-2008 at 06:07am
Camera Raw Engineer
Essentially, with the newer Leopard APIs, the recommended approach is for a printer driver to register its printer profiles to the system (i.e., Leopard). That is, the driver needs to provide a default profile to Leopard so that Leopard can provide the appropriate color matching. The default profile provided usually is a function of the color mode (e.g., RGB color or black-and-white), media type, resolution, etc.
CS4 was updated to use the newer printing APIs (a requirement moving forward) and hence relies on the driver providing the correct default profile.
If the driver doesn't do this, then Leopard will provide its own default profile, which is obviously not the correct printing profile and will have the side effect of making prints appear too dark and possibly with a strong color cast.
(BTW, this is exactly what was going on with some Canon iPF printers recently with many users blaming Adobe for introducing printing bugs in CS4, when the real issue was the driver not correctly providing the default profile to Leopard. The issue was resolved a couple of days ago when Canon released an updated driver.)
The problem appears to be Leopard indeed, ironically because CS4 was
optimized for Leopard, while early versions are not.
The solution/workaround has worked for several users already, and it's certainly easy to implement.

Printing in CS4 and Margins

Similar Messages

Maybe you are looking for