Printing in Elements 9 (Macintosh)

I'v recently bought a new iMac along with Elements 9, installed my printer, an Epson stylus R2400 with updated drivers. I then tried to do some printing and discovered that I could not change some advanced settings ie. paper type, paper tray, print quality ect. Windows only it seems, but not Macintosh. Have wasted my money? there seems no logic to it.

If you see this, click here:
to get something like this:

Similar Messages

  • When I try to print, Photoshop Elements 10 crashes.  Please help!!!!

    When I try to print, Photoshop Elements 10 crashes.  Please help!!!

    did you download the installation files?
    if yes, what files (names/extensions) and what sizes?
    if no, copy your cd contents to a desktop folder and attempt to install from the desktop folder.

  • Printing from Elements 11 with a cannon  IP8750  I get horizontal banding right across the print .The printer operates for a distance of 10/12mm then pauses and it does this right throughout the print. it will print perfectly well from aperture, iPhoto an

    problems with cannon printing from elements 11 . Get severe horizontal banding from elements but not from other photo software help please

    Anyone?

  • Why won't my printer (Brother HL2270DW) print out Elements User bi-monthly magazine?  Screen says PDF format not supported or printer not connected (it is) or shows an empty screen.  No other printing problems on any website.

    Why won't my printer (Brother HL2270DW) print out Elements bi-monthly magazine.  Screen says either printed not connected (not true) or PDF not supported of shows a blank document.  No problems printing on any other website.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • How Do I Center an Image for Printing with Elements?

    Elements 9 and 11: When I select "center" in the printing que the printed image is always shifted to the left of page center.
    What am I doing wrong? New computer, new printer, and Elements shifts the image to the left!!
    I downloaded the Elements 11 trial version to see if that would fix the issue but it does the same thing!

    My original problem:
    --> 3 elements in a panel, a title image
    (JLabel topImage = new JLabel(new
    w ImageIcon("WelcomeTitle.jpg"));), a button,
    and a bottom image. I wanted the title image at the
    top, the bottom image at the bottom, and the button
    in the middle. I tried this with a BorderLayout, the
    top image being Border.NORTH, the bottom Border.SOUTH
    and the button Border.CENTER, however the button
    completely filled its panel and was really ugly.
    add the button to a JPanel and add the panel to CENTER.
    Cheers
    DB

  • Printing from Elements 8 using Epson Stylus Photo R300

    Help!  I'm really quite useless at all this computer stuff, and my problem is slowly driving me mad!!!  I am trying, unsuccessfully, to print from Elements 8 using an Espon Stylus Photo R300.  However, I dont know what settings to use.  I can get prints - but they dont represent what I see on the monitor.  I have tried using Picasa and the representation on the print isnt too far removed from that on the monitor.  iPhoto is slightly worse.  Can anyone tell me in simple english what settings I need to use - I have seen other discussions on the same topic and think that color management should be done by the Elements 8 and not the printer?  Any help would be very much appreciated - before I lose it all together

    Hi Syd.   I was out on the web and saw where you respond to a message about printing using R300 printer. If you can help me that would be great.. this is the message that I sent Jayne who was having a problem..
    Hi Jayne,
    Did you get you problem resolved.   I am experiencing the same problem with with element 8 and Epson r300 printer.  I tried both support groups Adobe wanted me to upgrade to element 9. and Epson gave me the phone running.  I have taking the printer to a Epson service center and the printer is working fine. I have change the various options in the software and no sucess.   I  had one image that I only crop and it the colors came out wrong.  Now if I don't touch the image and just print it the colors come out fine.. So please let me know if you got it resolved.

  • Not able top print with elements 8

    How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?

    jag213 wrote:
    How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?
    You are doing absolutely nothing to warrant this to happen.  200 dpi could be the resolution of your printer.  Most laser printers would print at 600 dpi but there were old ones that printed at 300 dpi or less.
    Have you installed the latest printer drivers for your operating system?  Windows 8 will inevitable require new drivers but you are not using it so this point might be not relevant.
    DPI simply means Dots per inch when printing.  Higher the better to get a sharper picture.

  • Borderless prints in elements 10

    I used to get borderless prints in elements 3 but I can't in elements 10. I have the same printer and computer. Why? Help.

    Hi Maria,
    Can you check you border setting under Printing Choice of your PSE's print dailog.
    To reach there , launch Print Dialog, then Click on More Options button and then check border values settings under Printing choice.
    If you want to print borderless, uncheck the check boxes present under border category here.
    Please give it a try and let me know whether it helps you.
    Also please check wether the Printer, that you are using, supports borderless Printing. To check thi go Printing Prefrences of your Printer and check "Borderless" check box.
    ~Tywin

  • Green or blue hue when printing in Elements 11

    I get a green or blue hue when printing in Elements 11.  Printer color control is off.  Need help to eliminate color hue when printing.

    Oh yes it has Barbara.  David is right.  Have a look at Elements 5.  I got that free and would still be using it if I hadn't had to upgraded to Windows 7.  I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments.  I used that printing option almost exclusively for printing cards and I bitterly regret not having it now.  I'm very disappointed with these printing options in Elements 11.  The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson.  I have seen it in screenshots, so I know that it is there.  It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever.  In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

  • Custom resizing images when printing in Elements 11

    Hi friends .... I could use some help ... When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before .... Please give any advice - this is making printing exactly what I want pure guesswork and is very difficult for me ...there must be something I'm missing when I print with Elements 11 .... thanks for any help ...
    David

    Oh yes it has Barbara.  David is right.  Have a look at Elements 5.  I got that free and would still be using it if I hadn't had to upgraded to Windows 7.  I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments.  I used that printing option almost exclusively for printing cards and I bitterly regret not having it now.  I'm very disappointed with these printing options in Elements 11.  The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson.  I have seen it in screenshots, so I know that it is there.  It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever.  In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

  • When are we going to be able to order prints via elements again

    when are we going to be able to order prints via elements again

    I live in northampton but it was kodak that used to print via elements before they went under

  • Why do I get faint horizontal lines when I print from elements 12 mac

    why do I get faint horizontal lines when I print from elements 12 mac

    Hi Ben,
    I can't reproduce that behavior.  The only two things I can think of at the moment are (1) you accidentally added a shortcut as a panel shortcut instead of a diagram shortcut or (2) the name of the object you specified isn't for the "Multiply" node, but for some other node (you said "Multiplication" in your initial post) that can only be dropped in certain places (i.e. maybe it's a node that is only valid in Simulation diagrams).  Can you post the following lines from your LabVIEW INI file so I can look into it further:
    QuickDropDiagramShortcuts
    QuickDropPanelShortcuts
    Let me know,
    -D
    Edit:  Yeah, what he said. 
    Message Edited by Darren on 10-13-2008 11:28 AM
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Scanning from all-in-one printer to Elements

    I have a Dell 4000 desktop computer, running Windows 7, 32-bit version, an Epson Stylus SX515W all in one printer/scanner etc, and Photoshop Elements 6.  I am told that I cannot scan from my Epson scanner to Elements 6, and that I will need Photoshop Elements 10 to do this.
    1. Is this correct?
    2. If so, do I have to buy a full version of Elements 10, or can I buy an upgrade?
    3. If only an upgrade is needed, what is it called, what will it cost and where can I download it from?
    4. If I have to buy the full version of Elements 10, will I need any other software to get it to scan images from my Epson Stylus SX515W?
    5. Where do I have to look to find your reply?
    Best wishes
    Nick Bannister
    [email protected]

    Hi Nick,
    First of all I would like to inform that PSE 6 is not tested on Win 7 and is very old version.
    In order to scan  from PSE, you will need Twain plugin which is required to scan from within Adobe Applications.
    To check if you already have twain or not, follow this :
    Navigate to C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
    If you find a file called "Twain", then you should be able to scan, if not then you have to download Twain from here : http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4688&fileID=4376
    Save the file, unzip it and then follow these steps :
    Close PSE 6.
    After that , navigate to PSCS5OptionalPlugins_Win_en_US\PSCS5OptionalPlugins_Win_en_US\Optional Plug-Ins\Win32, here you will find Twain_32.8BA file
    Copy this file and then paste under  : C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
    Launch PSE 6 and check if you get the option to scan under File >> Import menu
    If the above solution doesnt work, then you may have to ugrade to PSE 10.
    The price for upgrade is $79.99 and full price is $99.99
    You can purchase full and upgrade both from Adobe.com website
    Thanks,
    Baljeet

  • Has anyone had a problem with printing from Elements 9 on a MAC?

    When I first installed Elements 9 and tried to print, all I got were blank pages.  I contacted adobe support and after an hour on the  phone, she referred me to the next level.  I then received an email from them asking me to call them and in the meantime, they suggested things I shoud do.  I did what they suggested and it worked.  I was able to print.  However, I was unable to indicate the type of paper or resolution that I wanted to print in.  So, I called them again.  It seems that on a windows PC, they give you five options for printing:  1.  Select printer, 2.  Select Settings, 3.  Select paper size, 4.  Type of print, and 5.  Select Print size.  On a MAC,  You get only three options:  Select printer, Select paper size and Select print size.  Does anyone know another way to select the settings and type of print.  I have been using Elements 4 for years with no problems.  Elements 4 gives all the  options.  I don't understand why it is not the same in Elements 9.

    Thank you so much.  You have solved my problem.  I never thought to click the down arrow.  In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button.  This one never did.  I don't understand why Adobe support never told me about that when I called them.

  • Printing in Elements 12 is pixilated, but all my other elements programs are fine?

    I can not print the exact same file in Elements 12.  In elements 12 it prints very pixelated and in Elements 9 and 10 it prints perfect.  Help?

    system details are incorrect.... i am using FF4.0.1 as on the about firefox tab
    Application Basics
    Name
    Firefox
    Version
    4.0.1
    User Agent
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.0.13) Gecko/2009073022 Firefox/3.0.13 (.NET CLR 3.5.30729)
    Profile Directory
    Open Containing Folder
    Enabled Plugins
    about:plugins
    Build Configuration
    about:buildconfig
    Extensions
    Name
    Version
    Enabled
    ID
    Microsoft .NET Framework Assistant
    1.2.1
    false
    {20a82645-c095-46ed-80e3-08825760534b}
    Java Console
    6.0.20
    true
    {CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
    Java Quick Starter
    1.0
    true
    [email protected]
    BullGuard Safe Browsing Toolbar
    1.0
    true
    antiphishing@bullguard
    PC Sync 2 Synchronisation Extension
    1.0.0.713
    false
    [email protected]
    Modified Preferences
    Name
    Value
    accessibility.typeaheadfind.flashBar
    0
    browser.history_expire_days.mirror
    180
    browser.history_expire_days_min
    5
    browser.places.importBookmarksHTML
    false
    browser.places.importDefaults
    false
    browser.places.leftPaneFolderId
    -1
    browser.places.migratePostDataAnnotations
    false
    browser.places.smartBookmarksVersion
    2
    browser.places.updateRecentTagsUri
    false

Maybe you are looking for