Printing in iPhoto 11 - previously unseen 'theme' error message

Am on verison 9.4.2 (710.42) of iLife 11. Never had a problem in printing before. However, when I now try to print a photo I get the following error box that appears:
No Avaialable Themes
There were no themes located. Until at least one
theme has been installed, this feature ill be
unavailable
Needless to say - there's no advice in Help to tell me how to access or install themes from this 'print using my own printer ' dialogue - and no very apparent \theme' selections process except when ordering prints.
Help!!!?

Reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Similar Messages

I cannot print from iphoto because of "no theme". Any suggestions?

I cannot print from iphoto because of "no theme". Any suggestions?

reinstall iPhoto - go to your receipts folder ("Your hard drive" ==> library ==> receipts) and remove any iPhoto receipts and reinstall from the restore disks that came with your computer - do a custom install of bundled software only
For more information <a href="http://www.macworld.com/article/132243/2008/02/pacifist.html"> click here for the MacWorld article on reinstalling OS X applications.</a>
LN

Hello, I upgraded to Yosemite (10.10.2) a month ago and everything was fine. Suddenly I can't open iPhoto. There is no error message and nothing happens. Please can you advise?

Hello, I upgraded to Yosemite (10.10.2) a month ago and everything was fine. Suddenly I can't open iPhoto. There is no error message and nothing happens when I click it. Thanks for any advice.

Hi Larry,
When I open the Bonusprint software there is a window on the side with 'LIBRARIES' at the top and I can access my photos and albums from here. I can still see all my photos in the various albums etc., underneath and when I click on them they open as thumbnails underneath but iPhoto itself is still paralysed even after I quit the Bonusprint software.

My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.

Just purchased a new mac with Mountain Lion installed. My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.

First try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does then make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

IPhoto will not open. Error message says I must upgrade. But APP store says it is already installed?

iPhoto will not open. Error message says I must upgrade but the AppStore indicates that the newest version of iPhoto is installed so how can I upgrade and why did it stop working in the first place? What is the problem?

Hi Terence. I solved my problem. Apparently a 9.5.1 version of iPhoto was dowloaded, backed up on Ext Drive then deleted from the Mac HD...Leaving the old version 9.4.3 still resident on the Mac HD.
Thanks for responding.

My printer works great but I keep getting error messages from HP Solutions Center

I'm using an HP Officejet J6480 All in One Printer on a Windows 7 64 Bit machine. The printer works great but I kept getting error messages from the HP Solutions Center every 15 seconds that popped up making it impossible to do work on my laptop so I uninstalled the Solutions Center to try to fix the problem. Now the printer won't print. Is there a way to re-install the Solutions Center and get rid of the pop up error messages?

hello Danagriz, unfortunately the plugin check page lags behind. adobe has released a critical patch for a vulnerability in its flash plugin, which is reportedly already exploited in the wild. therefore firefox will block insecure versions from running by default on websites for your protection.
https://helpx.adobe.com/security/products/flash-player/apsb14-27.html https://addons.mozilla.org/firefox/blocked/p794
please update to Adobe Flash Player version 16.0.0.235 as soon as possible, which you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows-exe for plugin-based browsers).
in order to update java, go to java.com (or if you don't need the plugin you can also uninstall it though the windows control panel)

I am not able to open my iPhoto. I get an error message saying it is locked

I am not able to open my iPhoto. I get an error message saying it is locked. How do I unlock it?

This issue can be caused by sharing the photo library on a network (against Apple's advice) or by opening it in more than one local user account at the same time. You may be able to clear the error by logging out or restarting the computer. If not, do as follows.
Quit iPhoto if it's running, locally or on any file-sharing client. Select the iPhoto Library in the Finder. Usually it's in the Pictures folder, but you may have moved it somewhere else. Right-click or control-click the library icon and select
Show Package Contents
from the popup menu. In the folder that opens, navigate to
Database/apdb/lockfile.pid
and move that file, if it exists, to the Trash. Close the Finder window.
Credit for this observation to ASC member Elijahg.

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Please help my printer talk to my computer. An error message always occurs when I try to print and Firefox self-help has not fixed the problem. Please help me directly with fixing the issue. Thank you.

Please help my printer talk to my computer. An error message pops up whenever I try to print. I have tried the firefox self-help on this topic and it doesn't work. I need direct help with this problem.

message is: "an unknown error occurred while printing" with the yellow icon and exclamation point. this is all it says every time.

When I try to print my book I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.

When I try to print my book, I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images. I don't understand what this means since all the photos are in the book. Can someone please clarify?

When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
When you import your images from a folder on your system drive, you have two ways to import:
Managed: Import and store the images in the library
Or referenced: Leave the images in the folder outside the Aperture library.
This is controlled by the "Store Files" settings in the Import panel:
If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out?

I am using Firefox ver. 3.0.19 and I have Windows 7. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.

I am using Firefox ver. 3.0.19 and I have Windows 7 which came with a new computer. When I use Firefox as a browser I cannot print my emails. I get an error message: "pcfax not availabe". If I use IE I have no problem printing the emails.
== This happened ==
Every time Firefox opened
== From day 1 with the new computer about two weeks ago.

It sounds like you have the wrong printer selected.
When you get the Print window, pick another printer from your printer dropdown. You seem to have a fax printer selected instead of a physical printer.

After installing Firefox 4.0 when trying to print get "Prop Res Dll not loaded" error message. I have a Dell A960 printer.

Installed Firefox 4.o now when I try to print and click on "properties" I get error message "Prop Res DLL not loaded". I have a Dell Printer A960. Never had this problem before so how do I fix this? I don't know that much about computers so please make it simple as I'm not that literate when it comes to complex computer fixes. thanks

See this [http://www.google.com/search?q=Prop+Res+Dll+not+loaded&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Google search] for a "fix".
Here's a Firefox bug that was filed a few months ago. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=649128 <br />
Looks like a problem caused by Lexmark print drivers doing a strange installation (Lexmark makes some of the Dell branded printers). Mozilla isn't going to revert the way Firefox looks for print drivers due to security concerns.
See if you can follow the fix posted here: <br />
https://support.mozilla.com/es/questions/816333

Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with 8 GB 1600 MHz DDR3
I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
Can anyone help as I have to get a document out tonight
Many thanks in advance
S

Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

I cannot start iphoto. I get an error message saying that it is in uso

I cannot start iphoto. I get an error message saying that it is in use by another application or it has become unreadable. What do I do to
correct this problem?

What version of iPhoto? Restore from back up is always the simple solution.

Printing in iPhoto 11 - previously unseen 'theme' error message

Similar Messages

Maybe you are looking for